PU Elastomer Casting Machine | Cold Rolling Rollers
PU-covered support and guide rollers used around cold-rolling lines, with shot planning and finishing sized for the selected roll. Listed 2A2B arrangement for the selected support-roller formulation.
Discharge Flow Rate
100–1500 g/s
Material Mix Ratios
MOCA: 100:10~13; BDO: 100:4~6
Metering Accuracy Reference
≤±0.3% (Full range)
Temperature Control
Tank A: 30~80°C; Tank B: MOCA(90~115°C)/BDO(25~50°C)
Cold-Rolling Support and Guide Roller Covering — Configuration and Scope
PU-covered support and guide rollers used around cold-rolling lines, with shot planning and finishing sized for the selected roll.
The listed HF-CPUE-2A2B-Roller-ColdRoll configuration is reviewed around support-roll dimensions, shot mass, line load, speed, coolant exposure and balancing requirements. The feed and additive arrangement follows the selected support-roller formulation. Coolant compatibility and load performance require material and roller tests.
Haifeng configures material preparation, degassing, metering and dynamic mixing. Core preparation, tooling, curing, grinding and inspection are defined as supplied or integrated interfaces in the proposal.
Finished-part performance is determined by the selected materials, processing conditions and agreed tests. Large-shot planning, coolant compatibility, core bonding, grinding and balancing are reviewed against the agreed service and test conditions.
Compare application requirements: Extrusion-Line Roller Covering · Textile Dyeing Roller Covering · Vacuum and Suction Roller Covering · General Industrial Roller Covering · Printing Roller Covering

Operation Workflow
Define the Roller Duty
Provide support-roll dimensions, shot mass, line load, speed, coolant exposure and balancing requirements.
Prepare Material and Core
Confirm the selected formulation, feed configuration, core preparation, bond system and tooling.
Meter, Cast and Cure
Coordinate material conditioning, metered shot, mold filling and the formulation-specific cure schedule.
Finish and Inspect
Review large-shot planning, coolant compatibility, core bonding, grinding and balancing. Finished-part performance is determined by the selected materials, processing conditions and agreed tests.
Need a quote for this equipment?
Request a QuoteTechnical Specifications
Standard configuration parameters for the cold rolling support roller casting machine. Customizations are available upon request.
| Technical Parameter | HF-CPUE-2A2B-Roller-ColdRoll |
|---|---|
| Pouring Rate | 100~1500 g/s |
| Raw Material Ratio | MOCA: 100:10~13; BDO: 100:4~6 |
| Tank Capacity | 220 L |
| Mixing Head Speed | 7000~11000 r/min |
| Dynamic Metering Accuracy | ≤±0.3% (Full range) |
| Tank Configuration | 2A2B two-component + wear-resistant & high-temperature resistant additive tank |
| Material Temperature Control | Tank A: 30~80℃; Tank B: MOCA(90~115℃)/BDO(25~50℃) |
| Vacuum Defoaming | Vacuum ≤-0.095MPa |
| Cleaning System | Automatic circulation + air purge cleaning |
| Power | 11~15 kW |
| Control System | PLC + touch screen + multi-formula storage |
| Applicable System | CPU Prepolymer + MOCA/BDO Chain Extender |
| Warranty | 1 year |
| Certifications | Confirm applicable documents for the quoted configuration |
Equipment Configuration and Application Inputs
Configuration features are reviewed for the selected roller, material and factory interfaces. Finished-part performance is determined by the selected materials, processing conditions and agreed tests.
Cold-Rolling Support and Guide Roller Covering
PU-covered support and guide rollers used around cold-rolling lines, with shot planning and finishing sized for the selected roll.
Listed Feed Arrangement
Listed 2A2B arrangement for the selected support-roller formulation. The feed and additive arrangement follows the selected support-roller formulation. Coolant compatibility and load performance require material and roller tests.
Material Conditioning
Heating, degassing and circulation follow the selected material data and equipment operating limits.
Shot and Mold Coordination
Review support-roll dimensions, shot mass, line load, speed, coolant exposure and balancing requirements. Metered filling is coordinated with the actual tooling and reaction window.
Core and Finishing Interfaces
Large-shot planning, coolant compatibility, core bonding, grinding and balancing are included in the scope and acceptance review.
Finished-Roller Validation
Finished-part performance is determined by the selected materials, processing conditions and agreed tests.
Discuss Your Equipment Configuration
Share your product, materials, tooling and production requirements so we can review the equipment and interfaces for your project.
Complete Your Production Line
Integrate the product with our full range of auxiliary equipment for a turnkey polyurethane processing system.
Frequently Asked Questions
What distinguishes cold-rolling support-roll casting?
What information is needed to configure this equipment?
Does the casting machine guarantee roller service performance?
Can the configuration use different cast PU formulations?
Ready to discuss your project?
Contact Our Team