Composite Metering & Molding Equipment
148 Views

RRIM PU Molding Machine | Fiber-Reinforced Composites

Reinforced reaction injection molding system for carbon/fiberglass-reinforced PU composites with high-pressure homogenization

Discharge Flow Rate

100–2000 g/s

Mix Ratio

Polyether: Isocyanate = 100:90~110

Metering Accuracy Reference

≤±0.3% (Full Dynamic Range)

Temperature Control

25–45°C

Availability on Request Delivery Schedule on Quotation 1-Year Warranty
High-strength composite molding solution for automotive and engineering structural parts

Product Overview

Specially designed for RRIM (Reinforced Reaction Injection Moulding) process, widely used in automotive structural parts, agricultural machinery heavy-duty parts, large engineering structural parts, high-end marine accessories and other fields.

This RRIM PU configuration supplies material conditioning, metering and mixing interfaces for the selected reinforced formulation. Define the reinforcement form, compatible material-contact path and tooling before selecting the package.

The listed 100–2,000 g/s delivery range and ≤±0.3% metering entry are configuration references. Reinforcement delivery, component temperature, shot size, venting and cure are coordinated for the part.

Strength, toughness, void content, dimensions and any comparison with unreinforced RIM require material and finished-component tests. A metering figure alone does not establish absence of delamination or molding defects.

Polyurethane molding unit with twin vertical material tanks, a touchscreen cabinet and a hose-supported mixing head

Configured

To Your Production Brief

Operation Workflow

Fiber-Reinforced Raw Material Preparation

Prepare polyether polyol and isocyanate at the target mix ratio (100:90-110); select reinforcing fibers (carbon or fiberglass) and ensure proper pre-conditioning for optimal dispersion.

Tank Loading & Temperature/Pressure Setting

Load polyol into Tank A and isocyanate into Tank B; the 1A1B temperature control maintains 25-45°C with circulation stirring, setting mixing pressure to 150-200 bar.

High-Pressure Homogeneous Mixing & Fiber Dispersion

Meter the components using the PLC dosing system and mix under the selected high-pressure conditions. The listed metering reference is ≤±0.3%; fiber dispersion and composite properties require trials with the chosen reinforcement and resin.

Mold Filling & Negative Pressure Venting

Inject the reinforced mixture into the mold using the configured venting arrangement. Validate fiber wet-out, residual voids and cure on representative molded parts.

Need a quote for this equipment?

Request a Quote
HF-RRIM-PU-1A1B

Technical Specifications

Standard configuration parameters for the RRIM PU molding machine. Customizations including tank capacity and formula options are available.

Technical ParameterHF-RRIM-PU-1A1B
Pouring Rate100~2000 g/s
Mix RatioPolyether: Isocyanate = 100:90~110
Tank Capacity200L / 300L (Optional, Per Tank)
Dosing Accuracy≤±0.3% (Full Dynamic Range)
Tank Configuration1A1B Two-Component Independent Temp Control + Circulation Stirring
Temperature Control25~45℃
Mixing Pressure150~200 bar
Venting SystemMold Negative Pressure Venting + High-Pressure Enhanced Homogenization
Cleaning SystemHigh-Pressure Circulation Cleaning + Air Purging
Power15~22 kW
Control SystemPLC + Touch Screen + Multi-Formula Storage
Application SystemRRIM-PU Carbon Fiber/Fiberglass/High-Strength Fiber Reinforced Composite System
Warranty1 Year
CertificationConfirm applicable documents for the quoted configuration
WHY CHOOSE US

Key Features & Advantages

Engineered for high strength, precision, and production flexibility in fiber-reinforced composite molding.

Reinforced Formulation and Feed Review

Specify reinforcement form, material compatibility and the actual delivery route. Define the required resin and tooling interfaces for the selected RRIM component.

Controlled Component Metering

The listed ≤±0.3% reference applies to material delivery under defined operating and test conditions. Finished-part defects and dimensions are checked separately.

Adjustable Large-Flow Output

Pouring rate of 100–2000 g/s supports both integral molding of large structural parts and pouring of small precision reinforced parts with strong equipment versatility.

Intelligent Multi-Formula Storage & Switching

Suitable for different fiber reinforced raw material ratios with easy operation, meeting the needs of multi-category flexible production without lengthy changeover times.

Mold Filling and Venting

Coordinate material delivery, tool venting and filling with reinforcement and cure. Inspect wet-out and void content on the representative part.

1A1B Independent Temperature Control with Circulation Stirring

Precise temperature control from 25–45°C with continuous circulation stirring ensures uniform material consistency and reliable reaction conditions.

Discuss Your Equipment Configuration

Share your product, materials, tooling and production requirements so we can review the equipment and interfaces for your project.

MORE EQUIPMENT

Browse other equipment in our catalog. These listings are for product discovery; compatibility and production-line scope are confirmed separately for your material, process and output requirements.

SUPPORT

Frequently Asked Questions

What must be defined for the reinforced RIM route?
Identify the resin, reinforcement form and loading, compatible feed path, mixing head, mold and cure. The selected formulation and finished-part tests determine the resulting properties.
Can every carbon- or glass-fiber material use the same feed path?
No universal compatibility is established. Review reinforcement form, particle or fiber dimensions, material-contact passages and tooling for the proposed formulation.
Does metering accuracy guarantee defect-free composites?
No. Calibrate component delivery under stated material and operating conditions, then validate mold filling, reinforcement distribution, cure and finished-part requirements.
What is the pouring rate range and what part sizes does it support?
The pouring rate is adjustable within 100–2000 g/s. This supports both integral molding of large structural parts and pouring of small precision reinforced parts, offering strong equipment versatility.
How does the machine handle different fiber-reinforced formulations?
The intelligent multi-formula storage and switching system supports different fiber reinforced raw material ratios, making operation easy and meeting the needs of multi-category flexible production.
What certifications does this equipment hold?
Documentation and conformity requirements are reviewed for the selected equipment configuration and destination market. Request the applicable declarations and supporting records for the quoted model. A company quality-management certificate does not certify the equipment or finished-part performance.

Ready to discuss your project?

Contact Our Team
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube