Concept illustration of Advanced Composite Manufacturing Solutionsرسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.

Composite Manufacturing Turnkey Plant

Select a composite manufacturing process around your reinforcement, resin system, part requirements and production targets, with metering, molding and process equipment configured for the chosen route.

Composite Applications and Selection Inputs

Start with the reinforcement, resin system, part geometry and production target. These applications use separately configured preparation, forming and curing routes.

مكونات السيارات

Match the molding route to the reinforcement, resin and requirements of the specified automotive part.

Wind Energy Components

Coordinate resin handling and process equipment around the selected wind-energy composite component.

PV Frame Applications

Review composite material and closed-mold injection requirements for the specified PV frame process.

Rail Transit Components

Match the composite route and equipment to the actual rail component and acceptance requirements.

Select a Composite Manufacturing Route

Compare reinforcement, resin system, part geometry and production targets. HP-RTM uses closed-mold injection; HP-CRTM uses a controlled mold gap followed by compression. Other routes have separately defined preparation, forming and curing requirements.

LCM: Resin Transfer Molding (RTM)

Plan resin delivery, mold preparation and the molding interfaces for the selected reinforcement and component.

العملية والتهيئة

Resin and reinforcement requirementsMold and injection configurationCure and production interfaces

HP-RTM Automated Preforming Line

Automate reinforcement cutting, heating and preforming to prepare woven carbon- or glass-fiber preforms for downstream HP-RTM molding. Resin injection, curing and final-part demolding are separate downstream operations.

العملية والتهيئة

Reinforcement cutting and handlingHeating and preform shapingDefined interfaces to downstream HP-RTM molding

LCM: High-Pressure Compression RTM

Review HP-CRTM with a controlled mold gap for resin distribution, followed by compression and closure. Resin delivery, press control and timing are configured for the reinforcement, part and tool.

العملية والتهيئة

Resin delivery and mold motionProcess-interface planningComponent and quality requirements

LCM: Vacuum Infusion (VIMP)

Plan resin preparation, vacuum-assisted infusion and the associated tooling and process interfaces.

العملية والتهيئة

Resin and infusion planningVacuum and tooling requirementsCure and inspection interfaces

Reaction Injection Molding (RIM)

Select the reaction injection configuration around the formulation and part requirements; define the reinforcement or filler system where used.

العملية والتهيئة

Formulation and part requirementsMetering and mixing configurationMolding and downstream interfaces

Long Fiber Injection (LFI)

Coordinate resin delivery, fiber handling and molding around the selected long-fiber component.

العملية والتهيئة

Resin and fiber configurationPart and tooling requirementsMolding and production integration

القولبة بالضغط لمادة SMC

Review material preparation and compression molding around the selected sheet molding compound and part.

العملية والتهيئة

SMC material and part planningCompression molding configurationالمناولة وفحوص الجودة

Prepreg Compression Molding (PCM)

Plan prepreg preparation, tooling, compression molding and downstream handling for the specified component.

العملية والتهيئة

Prepreg and component requirementsTooling and compression processHandling and inspection planning

Vacuum Bag Only Processing (VBO)

Coordinate suitable materials, vacuum-bag tooling and cure conditions around the selected component.

العملية والتهيئة

Material and bagging requirementsVacuum and cure interfacesComponent inspection planning

Autoclave Molding

Configure the material preparation, tooling, pressure and thermal-processing interfaces for the selected autoclave route.

العملية والتهيئة

Material and tooling preparationPressure and thermal processواجهات المناولة والفحص

Closed-Mold HP-RTM Process Package

Coordinate resin conditioning, metering and impingement mixing with closed-tool injection, preform handling and cure control. HP-CRTM is a separately configured route with controlled mold-gap and compression interfaces.

العملية والتهيئة

Closed-mold injection routeDefined preform and tooling interfacesHP-CRTM specified separately

Robotic LFI and RIM Process Package

ترسيب روبوتي للألياف المقطّعة وتوصيل PU لتطبيقات LFI المُهيَّأة، مع واجهات RIM ذات قالب مغلق محددة بشكل منفصل.

العملية والتهيئة

معدات وواجهات محددةمراجعة المواد والتجهيزات القالبيةتحقق خاص بكل تكوين

Composite Compression Press Package

مكبس هيدروليكي متعدد الأسطوانات للكبس، مزوّد بتسوية نشطة لصفيحة الكبس، مخصّص للتجهيزات القالبية المركّبة المحددة وللقوالب الأولية الصلبة.

العملية والتهيئة

معدات وواجهات محددةمراجعة المواد والتجهيزات القالبيةتحقق خاص بكل تكوين

Share Your Reinforcement, Resin, Part and Production Target

Equipment Roles in the Selected Route

Match resin delivery, molding and curing equipment to the selected route. These are related equipment references, not a single standard line; tooling, handling and downstream interfaces follow the agreed project scope.

آلة قولبة البولي يوريثان العامة بتقنية RIM | المكوّنات المركّبة

آلة قولبة البولي يوريثان العامة بتقنية RIM | المكوّنات المركّبة

تحضير مواد RIM وقياس جرعاتها وخلطها لأجزاء PU، مع واجهات للحشو والتسليح والتجهيزات القالبية محددة وفقًا للتركيبة.

عرض المعدات
آلة قولبة RRIM PU | مركبات مقواة بالألياف

آلة قولبة RRIM PU | مركبات مقواة بالألياف

آلة تشكيل RRIM PU للمواد المركّبة المقوّاة بالألياف. راجع التهيئة ومتطلبات المواد وواجهات العملية مع Haifeng.

عرض المعدات
آلة صب الإيبوكسي | شفرات توربينات الرياح

آلة صب الإيبوكسي | شفرات توربينات الرياح

تحضير الإيبوكسي وقياس الجرعات والخلط لواجهات التشريب الخاصة بشفرات الرياح. تتبع خصائص الصفيحة المركّبة المادة وعملية التصلّب والاختبارات.

عرض المعدات
آلة رغوة PU المركبة RIM | قطع غيار السيارات

آلة رغوة PU المركبة RIM | قطع غيار السيارات

توصيل PU RIM مُهيَّأ لأجزاء السيارات، مع حشو أو تسليح مختار، وواجهات للتجهيزات القالبية ومعالجة المواد.

عرض المعدات
آلة رغوة PU المركبة RIM | أغطية محركات الجرارات

آلة رغوة PU المركبة RIM | أغطية محركات الجرارات

واجهات قياس الجرعات والتشكيل لـ PU RIM الخاصة بأغطية الجرارات وأغلفتها، مهيّأة وفقًا للمادة والتقوية وهندسة القطعة.

عرض المعدات
آلة رغوة PU المركبة RIM | مكونات المباني

آلة رغوة PU المركبة RIM | مكونات المباني

توريد مواد PU RIM لمكوّنات البناء، مع تحديد التركيبة والتقوية والقوالب ونطاق الإنتاج للقطعة.

عرض المعدات
آلة رغوة PU المركبة RIM | هياكل قوارب الأمواج

آلة رغوة PU المركبة RIM | هياكل قوارب الأمواج

توريد مواد PU RIM للأجزاء البحرية المحددة، مع اختيار الراتنج والتسليح والتجهيزات القالبية بما يناسب التطبيق.

عرض المعدات
آلة حقن HP-RTM | مركبات ألياف الكربون

آلة حقن HP-RTM | مركبات ألياف الكربون

قياس جرعات HP-RTM وخلطها للمواد المركّبة من ألياف الكربون، مع الحقن في قالب مغلق وواجهات مكبس وتجهيزات قالبية HP-CRTM مُهيَّأة بشكل منفصل.

عرض المعدات
Concept illustration of HP-CRTM Resin Injection System for Composite Panelsرسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.

نظام حقن الراتنج HP-CRTM | الألواح المركّبة

قياس جرعات الراتنج عالي الضغط وحقنه سطحيًا، بالتنسيق مع التجهيزات القالبية للكبس-RTM وحركة المكبس.

عرض المعدات
Concept illustration of Robotic LFI System for Composite Body Panelsرسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.

نظام LFI الروبوتي | ألواح هيكل السيارة المركّبة

ترسيب روبوتي للألياف المقطّعة وتوصيل PU لتطبيقات LFI المُهيَّأة، مع واجهات RIM ذات قالب مغلق محددة بشكل منفصل.

عرض المعدات
رسم تصوري لمكبس ضغط مركّبات PCM وSMCرسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.

مكبس كبس المواد المركّبة | PCM وSMC

مكبس هيدروليكي متعدد الأسطوانات للكبس، مزوّد بتسوية نشطة لصفيحة الكبس، مخصّص للتجهيزات القالبية المركّبة المحددة وللقوالب الأولية الصلبة.

عرض المعدات
Concept illustration of Composite Autoclave for Prepreg Curingرسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.

أوتوكلاف المواد المركّبة | معالجة الـ Prepreg

حزمة معالجة في وعاء ضغط مُراقَب، مع تسخين مُقسَّم إلى مناطق، وضغط بالغاز، ودوائر فراغ مستقلة للتجهيزات القالبية.

عرض المعدات

نطاق التسليم والتكامل

Define reinforcement and resin preparation, the selected forming or curing route and factory interfaces together. Presses, molds, preform handling, heating, vacuum, automation and inspection are included only where agreed.

Reinforcement and Resin Preparation

Confirm the reinforcement form, resin system and preparation or metering package. Preforming is a separately defined stage where the selected route requires it.

Forming and Curing Interfaces

Specify the selected RTM, HP-CRTM, prepreg, LFI or other route. Presses, molds, vacuum and heating belong to that configuration, not a standard common package.

Integrated and Customer Systems

Assign preform handling, resin delivery, forming equipment, automation, utilities and control connections to the responsible project parties.

التشغيل التجريبي وقبول الأجزاء

Agree equipment checks and operator training separately from material, tooling and finished-part validation for the selected configuration.

الأسئلة الشائعة حول تخطيط المصنع

استعرض المسار وواجهات المعدات ومدخلات المشروع قبل تخطيط نظام الإنتاج الخاص بك.

What distinguishes HP-RTM from HP-CRTM?

HP-RTM injects resin into a closed mold containing the reinforcement. HP-CRTM uses a controlled mold gap during resin distribution, followed by compression and closure. Tooling, press control and injection timing are configured for the selected route.

Are preforming, LFI and prepreg curing interchangeable?

Preforming prepares reinforcement for a later molding stage. LFI deposits chopped fiber with reactive material, while prepreg routes use supplied impregnated reinforcement and a defined cure cycle. Each has different equipment and material requirements.

Does a metering package include the complete composite factory?

Presses, molds, preform handling, heating, vacuum, automation and inspection are included only where agreed. Define these interfaces alongside the resin-delivery package and the part acceptance plan.

ما المطلوب لعرض أولي من المصنع؟

أرسل بيانات موادك، وأبعاد منتجك، وهدف الإنتاج، والمرافق المخططة في الموقع، ومراحل العملية المطلوبة. وسيرد فريقنا خلال يوم عمل واحد. وبعد وضوح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل. ويُتفق على نطاق المعدات ومراحل التشغيل الرئيسية ومعايير القبول لكل مشروع.

Discuss Your Composite Production Requirements

Tell us what you plan to produce, the materials you will use, your target output, automation requirements and factory conditions. Haifeng can discuss a suitable process and equipment configuration with you. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube