معدات قياس الجرعات والقوالب للمواد المركّبة
181 Views

آلة رغوة PU المركبة RIM | مكونات المباني

RIM composite molding system for prefabricated building components with fiber-reinforced structural PU

معدل تدفق التصريف

100–2000 g/s

نسبة الخلط

Polyether: Isocyanate = 100:90~110

مرجع دقة قياس الجرعات

≤±0.3% (النطاق الديناميكي الكامل)

التحكم في درجة الحرارة

25–45°س

التوافر عند الطلب جدول التسليم حسب عرض السعر ضمان لمدة سنة واحدة
Lightweight high-strength composite solution for prefabricated building components

نظرة عامة على المنتج

توريد مواد PU RIM لمكوّنات البناء، مع تحديد التركيبة والتقوية والقوالب ونطاق الإنتاج للقطعة.

This RIM package supplies configured PU material delivery and molding interfaces for specified building components. Resin, compatible fillers, reinforcement format, molds and handling are selected for the component and production target.

The listed 1A1B arrangement includes independent temperature control and circulation, 100–2,000 g/s delivery and a ≤±0.3% metering reference under the agreed operating conditions. Recipe changes require review of material circuits, cleaning and tooling.

Part weight, strength, dimensional stability, compression, weathering and aging performance depend on the material, reinforcement, filling and cure conditions. Equipment supply does not establish structural or building-product qualification; finished-component tests and acceptance are agreed separately.

نظرة عامة على المنتج

مُهيَّأ

وفقًا لمواصفات إنتاجك

سير العمل التشغيلي

Fiber-Reinforced Raw Material Preparation

Prepare polyether polyol and isocyanate according to the target mix ratio (100:90-110). Select the appropriate fiber-reinforced formulation and ensure proper conditioning for optimal composite properties.

تحميل الخزانات وضبط درجة الحرارة/الضغط

Load polyol into Tank A and isocyanate into Tank B. The 1A1B independent temperature control system maintains 25-45°C with circulation stirring; set mixing pressure to 150-200 bar.

High-Pressure Homogenization & Large-Flow Dispensing

The PLC-controlled dosing system (≤±0.3% full dynamic range) dispenses materials precisely. High-pressure mixing ensures homogeneous fiber dispersion; the large-flow rate (100-2000 g/s) enables overall pouring molding.

Mold Filling, Venting & Curing

Inject the composite material into the component mold. The mold negative pressure venting removes trapped air, ensuring complete fiber wet-out. Finished products feature light weight, high strength, and weather resistance.

هل تحتاج إلى عرض سعر لهذه المعدات؟

اطلب عرض سعر
HF-RIM-1A1B-BuildingParts

المواصفات الفنية

Standard configuration parameters for the large building part RIM composite PU machine. Customizations including tank capacity and formula options are available.

المعلمة الفنيةHF-RIM-1A1B-BuildingParts
معدل الصب100~2000 g/s
نسبة الخلطPolyether: Isocyanate = 100:90~110
سعة الخزان200 لتر / 300 لتر (اختياري، لكل خزان)
دقة قياس الجرعات≤±0.3% (النطاق الديناميكي الكامل)
تكوين الخزاناتتحكم مستقل في درجة حرارة المكوّنين 1A1B + تقليب بالتدوير
التحكم في درجة الحرارة25~45℃
ضغط الخلط150~200 bar
نظام التهويةMold Negative Pressure Venting + High-Pressure Homogenization
نظام التنظيفHigh-Pressure Circulation Cleaning + Air Purging
القدرة15~22 kW
نظام التحكمPLC + شاشة لمس + تخزين متعدد الصيغ
نظام التطبيقFiber-reinforced structural polyurethane RIM composites
الضمانسنة واحدة
الشهاداتتأكيد المستندات المعمول بها للتكوين المقدَّم في عرض السعر
لماذا تختارنا

الميزات والفوائد الرئيسية

Engineered for lightweight, high-strength, and weather-resistant building component production.

Building-Component Material Review

Define resin, reinforcement or compatible fillers and tooling for the part. Weight, strength, compression, aging, weathering and dimensional requirements are validated on the finished component.

Large-Flow Stable Discharge

Pouring rate of 100–2000 g/s meets the overall pouring molding requirements of large-shaped building components with consistent quality.

High-Precision Metering Closed-Loop Control

Dosing accuracy ≤±0.3% ensures minimal deformation of finished products and superior dimensional uniformity across all production batches.

One-Key Multi-Formula Switching

Intelligent formula storage and switching flexibly adapts to batch production of various types of building composite components, reducing changeover time.

High-Pressure Homogenization + Mold Venting

Combines the listed 150–200 bar mixing reference with mold venting. Fiber wet-out, residual voids and structural properties require validation with the selected composite formulation and tooling.

1A1B Independent Temperature Control with Circulation Stirring

Precise temperature control from 25–45°C with continuous circulation stirring ensures uniform material consistency and reliable reaction conditions.

ناقش تكوين معداتك

شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.

المزيد من المعدات

تصفح معدات أخرى في كتالوجنا. هذه القوائم مخصصة لاكتشاف المنتجات؛ ويتم تأكيد التوافق ونطاق خط الإنتاج بشكل منفصل وفقًا لمتطلباتك من المواد والعمليات والمخرجات.

الدعم

الأسئلة الشائعة

What building components is this machine designed for?
This machine is suitable for the production of prefabricated exterior wall components, architectural decorative parts, and large-scale lightweight structural parts for modern prefabricated buildings.
How are building-component materials selected?
Specify the resin, reinforcement or compatible filler, tooling and product duty. Weight, strength, weathering, aging and structural suitability depend on the finished material and component tests, rather than being established by the casting machine.
ما نطاق معدل الصبّ ولماذا هو مهم؟
The pouring rate is adjustable within 100–2000 g/s. This large-flow stable discharge capability enables the overall pouring molding of large-shaped building components without seams or defects.
What does the metering reference establish?
The listed ≤±0.3% reference requires the agreed operating range and test conditions. Dimensional stability also depends on formulation, reinforcement, tooling, filling and cure. It is not guaranteed by the metering figure alone.
Can the machine handle different building component types?
Yes. The intelligent one-key switching of multiple formulas flexibly adapts to batch production of various types of building composite components, enabling efficient changeovers without lengthy downtime.
ما الشهادات التي تحملها هذه المعدات؟
تتم مراجعة متطلبات الوثائق والمطابقة وفقًا لتكوين المعدات المختار وسوق الوجهة. اطلب الإقرارات والسجلات الداعمة المعمول بها للطراز المقدَّم بعرض سعر. ولا تُعد شهادة إدارة الجودة الخاصة بالشركة شهادةً للمعدات أو لأداء الأجزاء المصنّعة.

هل أنت مستعد لمناقشة مشروعك؟

تواصل مع فريقنا
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube