Discontinuous PU Sandwich Panel Molding Solution Banner background

Решение для формования прерывистых сэндвич-панелей ППУ

Flexible hydraulic press foaming systems engineered for customized cold room panels, freezer doors, and modular walk-in coolers. Concept illustration — not a photograph of delivered equipment or a customer installation.

2+2Daylights Multi-Station Press System
Cam-lock Fixture and engagement inspection
250мм Max Custom Thickness
Custom Commercial Refrigeration

Highly Flexible Discontinuous PU Panel Molding Solutions

While continuous lines excel at massive standard volumes, regional cold room builders, refrigerated display manufacturers, and specialty vehicle upfitters need versatility to produce custom dimensions, variable thicknesses (50–250mm), and panels with embedded eccentric cam-locks. Haifeng’s discontinuous sandwich panel solution utilizes high-pressure injection machines synchronized with multi-daylight 2+2 hydraulic presses, allowing independent loading, injection, curing, and unloading cycles with separate loading, curing and changeover allowances.

2+2 Alternating Daylight Productivity

While one set of platens undergoes pressurized curing, operators load sheet boxes and cam-locks on the opposite platens, maximizing press cycle utilization.

Precision Embedded Cam-Lock Integration

Magnetic positioning side bars hold eccentric male and female cam-locks securely inside the mold, producing walk-in cold room panels ready for instant site latching.

Balance box assembly, injection, heated cure and unloading across the selected alternating press arrangement. Embedded locks, door components and PIR materials need their own tooling and material review rather than being inferred from platen dimensions.

Производственная последовательность

Discontinuous Hydraulic Panel Pressing Workflow

A synchronized four-stage workflow delivering custom-dimension insulated panels with high density uniformity.

01

Sheet Box Loading & Cam-Lock Positioning

Pre-cut metal sheet boxes are placed onto the open platen; perimeter boundary bars embedded with magnetic cam-lock locators are clamped securely around the edges.

PLATEN SIZE: UP TO 12M × 1.5M | MAGNETIC CLAMPING
02

High-Pressure Multi-Port Foam Injection

A high-pressure PU dosing unit injects a metered chemical shot through side-edge injection holes; the liquid formulation spreads evenly across the closed, tilted cavity.

METERING PRESSURE: 160–200 BAR | SHOT REPEATABILITY: ±0.5% REFERENCE UNDER DEFINED CONDITIONS
03

Hydraulic Clamping & Heated Oil Curing

The configured hydraulic press confines the expanding foam while platen circuits control temperature. The supplied reference is 50–60°C; bond quality and cure require material and panel validation.

PLATEN TEMP: 50°C–60°C | CURING: 10–15 MIN
Конфигурация и технологические параметры

Технические характеристики

Review the equipment and process parameters for Discontinuous PU Sandwich Panel Molding Line. Final values depend on the material, tooling, production target and agreed configuration.

Технический параметрСтандартная спецификация / ЗначениеИнженерный контекст и проверка
Целевое применениеWalk-in Cold Rooms, Freezer Doors, Specialty VehiclesCustom-sized insulated panels with cam-locks
Изоляционный материал сердечникаPolyurethane (PUR) / PIR Rigid FoamIn-situ pressurized cavity injection
Press Bed Dimensions6.5m / 8.5m / 12.0m (Length) × 1.3m – 1.5m (Width)Accommodates oversized walk-in panels
Диапазон толщины панели50 mm – 250 mm (Adjustable boundary bars)Quick manual or motorized gap changeover
Press Daylight Configuration2+2 Daylights (Optional 3+3 Daylights)Alternating load/cure work cycle
Clamping Force150 – 300 Tons (Hydraulic cylinder network)Resists internal high foaming expansion pressure
Диапазон плотности пеноматериала40 – 45 кг/м³High structural core density
Values on this solution page must be confirmed for the selected material, product, test method and operating conditions in the project proposal. Existing project records are specific to their own configurations. Generic-model shot repeatability reference: ±0.5% for material viscosity of 100–20,000 cP under operating conditions; the ordered model and agreed test conditions apply.
Оборудование для дозирования, смешивания и линии

Оборудование для этого решения

The related project describes a 2+2, 6.5 m workcell and a 15 min reference cadence for two 100 mm panels. Linked product 910 lists a separate 3–10 min single-mold reference and 20–300 mm range; those figures are not the acceptance specification of this project. Core material, mold volume, shot flow and cure must be matched. The batch-panel line and high-pressure metering unit have different functions. Select the actual platen/daylight and material-delivery package together.

Инженерные аспекты

Key Discontinuous Engineering Advantages

For Discontinuous PU Sandwich Panel Molding Line, assess material compatibility, process control, equipment interfaces and changeover needs against your production brief.

Configured Dimensions

Length, width and thickness depend on platens and tooling; the reference range is 50–250 mm.

Cam-Lock Positioning

Fixtures locate locks; inspect engagement and keep foam out of mechanisms.

Layout Planning

The related project uses a 450 m² workcell reference; allow site-specific maintenance and handling space.

Batch Shot Control

Metered shots support variable orders; startup, rejects and changeovers remain part of production planning.

Вопросы планирования производства

Часто задаваемые вопросы

Сравните производственные маршруты, требования к материалам, конфигурации оборудования и исходные данные проекта.

When is a batch route useful? +
Review custom dimensions, cam-locks, order mix, molding residence, handling and daily output. There is no universal area-output threshold for route selection.
How does the alternating press work? +
One configured station can cure while the other is loaded or unloaded. The exact daylight and platen sequence is defined by the ordered press.
What cycle time is reported? +
The related brief reports a 15 min cadence for two 100 mm panels. Loading, injection, cure, demolding, mold count and good-part yield are needed for shift output; it is separate from product 910’s single-mold reference.
Can freezer doors be produced? +
Specified door tooling can accommodate frame inserts and hinge interfaces after material, thickness and mold reviews.
Can a batch configuration process PIR? +
Review the selected PIR formulation, material temperatures, reaction timing, platen heating and press residence through trials. A PUR configuration is not automatically suitable for every PIR recipe.
Какие исходные данные нужны для этой конфигурации? +
Panel/door drawings, thickness and lock mix, formulation, shot mass, mold population, shifts, layout and inspection needs. Identify retained equipment and the required acceptance documents.
How should the alternating-press production sequence be specified? +
Show which stations load, fill, cure and unload in parallel. Define the included handling and inspection time, then calculate output from the actual panel mix and available molds.

Опишите свои производственные задачи

Share the following for this application: Panel/door drawings, thickness and lock mix, formulation, shot mass, mold population, shifts, layout and inspection needs. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Связаться с нами

О том, как мы обрабатываем информацию из вашего запроса, читайте в Политика конфиденциальности.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube