Sistema de inyección de resina HP-CRTM | Paneles de composite
Dosificación de resina a alta presión e inyección superficial coordinadas con el utillaje de compression-RTM y el movimiento de la prensa.
Caudal de descarga
20.0 to 300.0 g/s (Instantaneous adjustable injection output)
Relación de mezcla
100:18 to 100:40 (By weight)
Referencia de precisión
±0.2% (Continuous closed-loop Coriolis mass feedback)
Mold Cure Temperature Reference
130°C for the listed fast-curing epoxy process (mold-cure reference)
Fast-Cycle High-Pressure Compression RTM for Large Structural Panels
Dosificación de resina a alta presión e inyección superficial coordinadas con el utillaje de compression-RTM y el movimiento de la prensa.
Dosificación de resina a alta presión e inyección superficial coordinadas con el utillaje de compression-RTM y el movimiento de la prensa.
Resin preparation, metering/mixing skid, tool injection interfaces and coordinated controls. Press, preform handling, mold and material validation are agreed external scope.
The stated 12–20 MPa is the metering/impingement circuit, distinct from cavity pressure. Press approach, pressing stroke, resin wet-out and the complete molding cycle are specified separately for the chosen resin, preform and tool.
Ilustración conceptual: Ilustración conceptual generada para el análisis del proceso; no es una fotografía de la máquina especificada, de una instalación del cliente ni de un proyecto entregado.

Flujo de material y principio de funcionamiento
Continuous Preform Positioning & Deep Cavity Evacuation
The multi-axial carbon fiber preform is loaded onto the heated bottom mold; the press closes to a calibrated 1.0 mm micro-gap while vacuum skids draw cavity pressure down to 0.05 kPa.
Micro-Gap Low-Resistance Resin Injection
The high-pressure impingement mixing head dispenses fast-curing epoxy at 18.0 MPa, spreading liquid resin rapidly across the open surface of the carbon fabric without fiber distortion.
High-Speed Vertical Compaction (HP-CRTM)
As injection terminates, the press executes rapid downward clamping at 300 mm/s under 3,000 tons of force, driving the resin through the thickness direction across the 3.5 m² surface.
Isothermal High-Pressure Curing
The part cures in-mold at 130°C under continuous 15 MPa hydraulic pressure for 90 seconds, with integrated dielectric sensors monitoring resin conversion in real time.
Robotic Demolding & Shuttle Transfer
Hydraulic cylinders crack the mold; automated end-effectors lift the hot composite tray, transferring it to edge-trimming fixtures every 120 seconds.
¿Necesita una cotización de este equipo?
Solicitar presupuestoModelo y parámetros técnicos
Supplied HF-CRTM300-PRO configuration references for the selected material, tooling and operating conditions. The stated 12–20 MPa is the metering/impingement circuit, distinct from cavity pressure. Press approach, pressing stroke, resin wet-out and the complete molding cycle are specified separately for the chosen resin, preform and tool.
| Parámetro técnico | HF-CRTM300-PRO |
|---|---|
| Componentes | 2 Components (A: Resin, B: Hardener) + Optional Release Agent |
| Rango de salida | 20.0 to 300.0 g/s (Instantaneous adjustable injection output) |
| Rango de relación de mezcla | 100:18 to 100:40 (By weight) |
| Referencia de precisión | ±0.2% (Continuous closed-loop Coriolis mass feedback) |
| Alimentación eléctrica | 380 V, trifásica, 50 Hz (opcional personalizada 440 V/480 V, 60 Hz) |
| Presión de trabajo | 12,0 a 20,0 MPa (líneas de dosificación e impactación de alta presión) |
| Capacidad de tanque/tolva | Day tanks: 2 x 100 L (Stainless steel with vacuum/oil jacket) |
| Peso | 3,800 kg (Injection unit skid) |
| Dimensiones (L×An×Al) | 2800 mm x 1950 mm x 2300 mm |
| Press Downward Compaction Speed | Up to 300 mm/s (Servo-hydraulic fast close); Integrated hydraulic press; configuration-specific reference |
| Micro-Gap Control Precision | 0.5 to 2.0 mm (Tolerance within ±0.02 mm); Linear optical encoder feedback; configuration-specific reference |
| Molding Surface Area Capability | Up to 3.5 m² (Continuous structural panel); Finished carbon composite tray; configuration-specific reference |
| Part Cycle Tact Time | ≤ 120 seconds (Including preform infeed and demold); Fast-curing epoxy at 130°C; configuration-specific reference |
| Mold Cure Temperature Reference | 130°C for the listed fast-curing epoxy process (mold-cure reference) |
Características clave del equipo
Resin preparation, metering/mixing skid, tool injection interfaces and coordinated controls. Press, preform handling, mold and material validation are agreed external scope.
Through-Thickness Penetration
Micro-gap surface distribution and through-thickness compaction are coordinated for the selected preform and tool. Fiber displacement is inspected on the part; zero fiber wash is not guaranteed.
300 mm/s Fast Press Compaction
The supplied 300 mm/s press-compaction reference is an agreed press interface. A sub-120-second complete cycle additionally depends on resin cure, handling and line balance.
Large-Panel Tooling Review
Define panel area, tool gap, press leveling, preform and resin-flow requirements together. Finished thickness is inspected on the actual cured panel.
Composite Component Qualification
Part mass and structural comparisons depend on the chosen material, geometry and load requirements. They are separate from the resin-metering rating.
Hablemos de la configuración de su equipo
Comparta su producto, materiales, utillaje y requisitos de producción para que podamos revisar el equipo y las interfaces para su proyecto.
Preguntas frecuentes
How does HP-CRTM control fiber displacement across large surfaces?
Why is 300 mm/s press downward compaction speed required?
What maintains part thickness uniformity across massive battery trays?
Can this equipment process structural polyurethane resin as well as epoxy?
¿Listo para hablar de su proyecto?
Contacte con nuestro equipo