
حل تلقائي لتجريع الجلد الصناعي بالعملية الجافة
Concept illustration · Configuration varies
نسّق تحضير الراتنج ومعجون الألوان للجلد الصناعي بالعملية الجافة. تدعم دوائر المكوّنات المُهيَّأة والوزن والتدوير وإدارة الوصفات تحضير الطبقة الأساسية والطبقة الوسيطة والطبقة العليا قبل خط الطلاء.
النطاق ومتطلبات المواد
نسّق تحضير الراتنج ومعجون الألوان للجلد الصناعي بالعملية الجافة. تدعم دوائر المكوّنات المُهيَّأة والوزن والتدوير وإدارة الوصفات تحضير الطبقة الأساسية والطبقة الوسيطة والطبقة العليا قبل خط الطلاء.
حدود التطبيق
This route prepares coating mixtures; it does not replace the coating, drying or lamination process. Ingredient selection follows the resin chemistry, pigment dispersion, viscosity and receiving-line requirements. Basecoat, intermediate coat and topcoat describe three coating stages, not three reactive chemical components.
مدخلات التهيئة
شارك هويات المكوّنات وبيانات المواد، والحد الأدنى من الإضافات، وأحجام الدفعات، وتفاصيل الحاويات، وأهداف المخرجات، وواجهات الموقع. ويُتفق على اختيار المعدات وقبولها للتطبيق الفعلي.
Manage basecoat, intermediate-coat and topcoat recipes as separate material duties. Define ingredient circuits, circulation and container release for each, with remaining mixture assessed before reuse; coating-stage count is not reaction-component count.
عملية تحضير المواد والتجريع
نسّق المعدات المختارة والوصفة وظروف المواد وواجهات عمليات الاستقبال. يصف سير العمل أدناه نطاق التخطيط لا تهيئة ثابتة لكل تركيب.
Define the coating recipes
Separate basecoat, intermediate-coat and topcoat requirements; identify each resin, pigment paste and auxiliary ingredient.
Condition the supply circuits
Review storage, filtration, material compatibility and circulation for the actual resin and pigment systems.
Identify and weigh the receiving container
Select the recipe and batch size, confirm container identity and tare, and verify the chosen weighing range.
المعاملات وظروف التشغيل
تصف جميع القيم الرقمية تكوينات مرجعية محددة. أكّد خصائص المواد والجرعة الدنيا وحجم الدفعة وظروف الوزن وطريقة القبول قبل اختيار المعدات. إن دقة القراءة في الميزان وخطأ جرعة المكوّن والتفاوت الكلي للدفعة كميات منفصلة.
تصف جميع القيم الرقمية تكوينات مرجعية محددة. أكّد خصائص المواد والجرعة الدنيا وحجم الدفعة وظروف الوزن وطريقة القبول قبل اختيار المعدات. إن دقة القراءة في الميزان وخطأ جرعة المكوّن والتفاوت الكلي للدفعة كميات منفصلة.
Production Batching Reference
| المعامل | التكوين المرجعي | النطاق والشروط |
|---|---|---|
| Color-paste circuits | 12–60 dispensing valves | Selected system range; final channel count follows the ingredient list. |
| Resin circuits | 1–12 dispensing valves | Separate from color-paste circuits. |
| Color-paste dosing reference | ±1 g | Stated configuration value; minimum dose and test conditions must be defined. |
| Resin dosing reference | ±10 g | Stated configuration value; not the total batch tolerance. |
| Batch-time reference | 5–10 min per container | Container mass, recipe and ancillary operations are not specified in this reference. |
| Circulation connections | DN25 pigment inlet / DN25 resin return; DN50 resin pipe | Individual connection references; finalize the pipe schedule. |
| Circulation modes | Timed, hourly, startup and manual circulation | Choose modes for the material and operating schedule. |
| Filter and pipework | Cartridge filter; internally polished inlet/discharge pipework and quick-connect discharge | Confirm cleanability and compatibility; no food-contact certification is implied. |
Basecoat, Intermediate-Coat and Topcoat Configuration
| المعامل | التكوين المرجعي | النطاق والشروط |
|---|---|---|
| صمامات التوزيع | Up to 24 | Separate configuration from the 12–60-channel production system. |
| Valve arrangement | Circular valve array; coarse, medium, fine and final additions | Confirm valve sequencing and shutoff with the selected materials. |
| Valve sealing reference | O-ring-free sealing | Final valve construction follows the quoted assembly. |
| Valve / pump connection references | DN20–DN40 / DN15–DN40 | Connection sizes, not pump output ratings. |
| Scale references | 30 kg / 0.1 g; 60 kg / 0.1 g | Source scale notation; rated capacity, readability and calibrated accuracy require separate confirmation. |
| Best-case dispensing reference | 0.1 g stated | No universal accuracy across all doses, materials or batch sizes is established. |
| Minimum container diameter | 250 mm | Check nozzle access, weighing support and container geometry. |
| أمثلة زمن الدفعة | 20 kg: 3–4 min; 200 kg: 6–8 min; 1,500 kg: 20–30 min | Separate sizing examples. Large batches do not use the listed 30/60 kg scale unchanged. |
| Hazardous-area arrangement | Specified for the actual material and site | Any proposed pressurization/isolation arrangement, zone suitability and conformity documents require project-specific review. |
عروض تصورية للمعدات والعمليات



مسارات إنتاج ذات صلة
إنتاج الجلد الاصطناعي بالعملية الجافة · حلول الجلد الاصطناعي PU
Batch Release and Coating-Line Handover
Agree how a prepared container is identified, mixed, checked and released to the coating line. Batch completion at the scale is separate from approval of coating viscosity, color and usable holding time.
أنظمة تحضير ذات صلة
مصنع المعالجة الكيميائية الجاهز للتشغيل · تكامل غرفة الخلط والتوزيع
واجهات التغذية والمراحل اللاحقة ذات الصلة
The linked dry-transfer coater is the receiving line, not the batching-machine specification. Define actual dispensing/weighing circuits and line handover.
مزايا التهيئة
تعتمد المزايا على المواد والمعدات وسير العمل التشغيلي المتفق عليها. تحقق من الجرعات والمناولة وقبول المنتج بشكل منفصل.
Stage-specific preparation
Keep basecoat, intermediate-coat and topcoat recipes distinct while coordinating material supply and batch records.
Configured circulation
Select return paths and circulation modes to address the actual sedimentation and viscosity behavior; verify them through trials.
Recipe-to-line traceability
Optional barcode and production-data interfaces connect approved recipes, receiving containers, transfer and consumption records.
الأسئلة الشائعة حول تخطيط الإنتاج
وضّح التهيئة وظروف القياس ونطاق التسليم قبل طلب عرض.
Does three-stage batching mean three-component PU mixing?
Do all channels and batch sizes achieve 0.1 g?
هل تعني العمليات الجافة الخلو من المذيبات؟
Can remaining coating mixture be reused automatically?
What should be checked before releasing a batch?
ما المدخلات اللازمة لهذا التكوين؟
How should a remaining coating mixture be approved for reuse?
Discuss Your Dry-Process Batching Requirements
Share the following for this application: Layer recipes, resin/color-paste identities and minimum additions, batch mass, settling, circulation, changes and leftover-release rules. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.