رسم تصوري؛ وليس صورة فوتوغرافية لماكينة مُسلَّمة أو مشروع عميل.Composite Solar Frame Turnkey Plant
Plan composite PV frame manufacture by closed-mold injection or injection pultrusion. Related edge dispensing and adhesive framing serve module assembly and have a separate scope.
التطبيقات
استكشف أهداف الإنتاج ومتطلبات المنتج التي توجّه تكوين العمليات والمعدات.
Composite PV Module Frames
Composite frame or profile manufacture uses a defined molding or pultrusion route. Reinforcement wet-out, tooling, cure control and acceptance depend on the chosen process.
Frame Production Configuration
Match the process and supporting systems to frame geometry, output requirements and the factory layout.
Compare Frame Manufacturing and Module Assembly Routes
Choose discrete frame molding or continuous profile pultrusion from the material, geometry and production target. Edge dispensing and HJT adhesive framing are related module-assembly operations, shown separately from frame manufacture.
Frame Manufacturing: Closed-Mold Injection
Review discrete composite PV frame manufacturing with resin delivery and injection into a configured closed mold. The tooling and handling package differs from a continuous pultrusion line.
العملية والتهيئة
Frame Manufacturing: Injection Pultrusion
Review continuous composite profile production with reinforcement impregnation, a closed injection die, pulling and downstream handling. A closed injection die does not make this a matched-mold HP-RTM or HP-CRTM process.
العملية والتهيئة
BIPV Colored Composite Profile Pultrusion
تنسيق السحب بالبثق للبولي يوريثان المعزز بالألياف الزجاجية مع مرحلة طلاء سطحي من البولي أسبارتيك تُقاس جرعتها بشكل منفصل لإطارات الطاقة الشمسية المعمارية الملوّنة.
العملية والتهيئة
Marine Composite Solar Frame Pultrusion
تطوير السحب بالبثق بالحقن عبر قالب مغلق لإطارات الطاقة الشمسية البحرية، مع إمداد راتنجي مكيّف، وترطيب الألياف الكثيفة، وتحكم في القالب، وتخطيط للتأهيل.
العملية والتهيئة
Related Module Assembly: Perovskite Edge Dispensing
Review material dispensing along an existing perovskite module edge. This is a module-assembly operation; it does not manufacture the composite frame profile.
العملية والتهيئة
Related Module Assembly: HJT Adhesive Framing
Review structural-adhesive dispensing and framing interfaces for an existing HJT module and frame. Module assembly and composite-frame manufacturing have separate equipment and acceptance scopes.
العملية والتهيئة
معدات لعملية الإنتاج لديك
The listed equipment supports continuous injection pultrusion. Closed-mold injection equipment, tooling and press interfaces are defined separately for the selected project; contact our team to review that scope. Related equipment cards describe route-specific references, not a single standard line.
نطاق التسليم والتكامل
Define composite frame manufacture separately from module assembly. Preparation, forming, handling, factory interfaces and validation follow the selected molding or pultrusion route and agreed supply scope.
Frame Route and Preparation
Confirm resin, reinforcement, frame geometry and production requirements. Select preparation and metering for the chosen frame-molding or injection-pultrusion route.
Frame Forming Interfaces
Define mold closure and demolding for discrete parts, or die control, pulling and cutting for continuous profiles. Their tooling and handling packages are distinct.
Separate Module Assembly
Edge dispensing and adhesive framing are module-assembly operations with separately defined material delivery and handling. They do not manufacture the composite frame.
Supply, Site and Validation
Assign supplied and customer equipment, utilities and control interfaces. Agree commissioning and training; frame/profile tests and complete module qualification have separate scopes.
شارك متطلبات المنتج والمواد والإنتاج والمصنع
الأسئلة الشائعة حول تخطيط المصنع
استعرض المسار وواجهات المعدات ومدخلات المشروع قبل تخطيط نظام الإنتاج الخاص بك.
How does closed-mold injection differ from injection pultrusion?
Closed-mold injection produces discrete parts in a configured mold. Injection pultrusion continuously pulls reinforcement through an impregnation and forming system to produce profiles. Their tooling, handling and production targets differ.
Are edge dispensing and HJT framing composite-frame manufacturing?
No. Edge dispensing and structural-adhesive framing are related module-assembly operations. They apply materials to an existing module or frame and do not themselves manufacture the composite frame profile.
Does equipment selection establish PV-module qualification?
Frame or profile tests and complete module qualification have different scopes. Material selection, joints, assembly and the required test program must be defined; equipment supply alone does not establish module compliance.
ما المطلوب لعرض أولي من المصنع؟
أرسل بيانات موادك، وأبعاد منتجك، وهدف الإنتاج، والمرافق المخططة في الموقع، ومراحل العملية المطلوبة. وسيرد فريقنا خلال يوم عمل واحد. وبعد وضوح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل. ويُتفق على نطاق المعدات ومراحل التشغيل الرئيسية ومعايير القبول لكل مشروع.
ناقش أهدافك الإنتاجية
Tell us what you plan to produce, the materials you will use, your target output, automation requirements and factory conditions. Haifeng can discuss a suitable process and equipment configuration with you. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.
