Rigid PU Imitation Wood Molding Solution Banner background

Solución de moldeo de imitación de madera de PU rígido

Plan rigid PU imitation-wood moldings around the master pattern, mold, finish and fastening requirements.

250–600kg/m³ Reference: Authentic Wood Density Range
100 % Reference: Moisture & Crack Resistance
70 %- Reference: Carving Labor Cost Savings
Architectural & Furniture Millwork

Structural Rigid PU Solutions for Intricate Imitation Wood Carvings

Imitation-wood molding reproduces a selected master pattern through material delivery, expansion and cure in a suitable mold. Part density and surface finish are chosen for the design; they do not reproduce every structural property of a named wood species. Moisture response, cracking and fastener holding must be assessed on the molded part.

Alcance de suministro definido

Specify material delivery, mold type, release, cure and finishing interfaces. A carved-part project does not establish a fixed labor saving or universal woodworking compatibility.

Insumos para la selección del proceso

Master pattern/CAD, relief and undercuts, part thickness, finish, fastener locations, batch mix and output.

Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Specify material delivery, mold type, release, cure and finishing interfaces. A carved-part project does not establish a fixed labor saving or universal woodworking compatibility.

Ruta de producción

Rigid PU Imitation Wood Molding Workflow

Review the pattern and finish → Prepare material and mold → Fill and cure → Finish and inspect. Define preparation, filling, cure and output timing separately for the selected configuration.

01

Review the pattern and finish

Identify fine relief, undercuts, parting lines and the coating or stain system.

02

Prepare material and mold

Confirm the formulation, mold construction and release procedure.

03

Rellenar y curar

Validate the shot and thermal sequence against the section thickness.

Configuración y parámetros del proceso

Especificaciones técnicas

Configuración existente y referencias de ensayo. Los ajustes del equipo, los resultados del material y los resultados del conjunto terminado son independientes; aplique cada valor solo a su configuración y condiciones documentadas.

Parámetro técnicoEspecificación estándar / ValorContexto de ingeniería y verificación
Aplicación objetivoBed Headboard Carvings, Ornate Wall Panels, Mirror FramesHigh-density architectural furniture millwork
Matriz del materialHigh-Density Structural Rigid Polyurethane FoamFast-curing microcellular imitation wood
Part Density Range250 – 600 kg/m³ (Customizable per wood species)Replicates pine, oak, mahogany, or teak
Screw/Nail Holding ForceConfirm against the selected fastener and specimenSpecify the fastener withdrawal method and source report
Capacidad de dosificación30 – 80 kg/min (Customizable)High-volume fast shot injection
Tiempo de ciclo de desmoldeo4 – 8 minutes (Thickness dependent)Rapid curing for heavy-section castings
Moisture Absorption<0.5% (24-hour water immersion)Verify dimensional stability and moisture response for the intended conditions
Existing application note: Confirm specifications against the selected formulation, tooling and operating conditions before final equipment selection. Original process references, with their existing values: Mold Preheating: 48°C–58°C | Tooling: Silicone / Epoxy | Dual TCU Loops; Injection Pressure: 150–190 bar | Injection Time: 2–5 s | Ratio Accuracy: ±0.5%; In-Mold Pressure: 0.2–0.4 MPa | Density: 250–600 kg/m³ | Curing: 4–8 min; Screw Withdrawal: Confirm by specimen testing | Moisture Uptake: <0.5% | Total Cycle: 5–8 min. Supplementary references: delivery up to 190 bar, injection 2–5 seconds, cavity pressure up to 0.4 MPa, shipping-weight comparison up to 30% and site work up to 20 days. Confirm the selected part, material, measuring circuit, baseline and installation scope. The original site-work range is 16 to 20 days; confirm the included positioning, press, thermal and trial tasks. Confirm the configuration, material, test method and cycle endpoints before using reference values as acceptance commitments.
Aspectos técnicos a considerar

Controles de proceso y verificaciones de aplicación

Evalúe estas funciones con el material, los moldes y el resumen de producción seleccionados. Los resultados de las piezas acabadas requieren su propia evidencia de aceptación.

Pattern-to-tool planning

Select mold materials and release strategy for the actual carving and undercuts.

Part-level stability checks

Evaluate moisture, dimensional response and cracking under the intended conditions.

Defined finishing and fastening

Test the coating and fastener arrangement on representative moldings.

Preguntas sobre planificación de la producción

Preguntas frecuentes

Respuestas sobre la selección del proceso, la integración de equipos y el soporte en la entrega.

Can density alone make a PU molding equivalent to solid wood? +
No. Establish the required stiffness, fastener holding, surface and environmental behavior for the actual part.
How should carving labor savings be evaluated? +
Compare the same part design, master/tool preparation, batch size, finishing and labor baseline. A project percentage is not a universal outcome.
¿Qué información se necesita para una configuración preliminar? +
Master pattern/CAD, relief and undercuts, part thickness, finish, fastener locations, batch mix and output. Identify the equipment and interfaces to retain, plus the required test and acceptance documents.

Hablemos de su proyecto de producción de muebles

Share the following with your production brief: Master pattern/CAD, relief and undercuts, part thickness, finish, fastener locations, batch mix and output. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Revisión de la configuración basada en la aplicación y los datos del material Documentación acordada de equipo, interfaces y aceptación Formación y soporte definidos para el paquete suministrado
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube