
Solución de moldeo de espuma de PU de piel integral
Configure integral-skin PU armrests and furniture components with defined surface and cleaning tests.
Precision Polyurethane Integral Skin Solutions for Ergonomic & Medical Furniture
Integral-skin furniture parts combine a molded outer skin and cellular core around the selected geometry and inserts. Skin formation, touch and surface integrity depend on the formulation, tool and cure. Use in healthcare furniture does not by itself establish resistance to every disinfectant or a medical qualification.
Alcance de suministro definido
Define the metering, fixtures, mold handling and any coating stage. Verify water-blown compatibility, skin quality and insert bonding with the selected material system.
Insumos para la selección del proceso
Part and insert drawings, desired touch, surface finish, cleaning regime, abrasion method, shot mass and output.
Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Define the metering, fixtures, mold handling and any coating stage. Verify water-blown compatibility, skin quality and insert bonding with the selected material system.
Integral Skin PU Foam Molding Workflow
Prepare inserts and tooling → Condition and dispense → Mold and cure → Inspect and clean-test. Define preparation, filling, cure and output timing separately for the selected configuration.
Prepare inserts and tooling
Confirm insert location, mold finish and the required surface system.
Acondicione y dispense
Establish material conditions and the filling sequence for the part.
Mold and cure
Validate skin/core formation, venting and the thermal sequence.
Especificaciones técnicas
Configuración existente y referencias de ensayo. Los ajustes del equipo, los resultados del material y los resultados del conjunto terminado son independientes; aplique cada valor solo a su configuración y condiciones documentadas.
| Parámetro técnico | Especificación estándar / Valor | Contexto de ingeniería y verificación |
|---|---|---|
| Aplicación objetivo | Medical Furniture Armrests, Office Chair 3D/4D Pads | Tactile high-wear furniture interfaces |
| Matriz del material | Polyurethane Integral Skin Elastomer (Water-Blown) | Eco-friendly zero-ODP formulation |
| Surface Hardness Range | Shore A 45 to Shore A 80 (Customizable) | Tailored from plush softness to rigid grips |
| Rango de densidad del núcleo | 250 – 450 kg/m³ | High shock-absorbing microcellular core |
| Capacidad de dosificación | 10 – 35 kg/min (Customizable) | Micro-shot precision servo axial pumps |
| Tiempo de ciclo de desmoldeo | 90 – 140 seconds (Standard 120 s) | High-cadence multi-carrier production |
| Taber Abrasion Test | Acceptance target agreed for the selected specimen | State the method, abrasive wheel, load, conditioning, cycle count and endpoint in the report |
| Wyzenbeek Abrasion Test | Separate result where the method is applicable | State the method, abradant, tension/load, conditioning, double-rub count and failure criterion; do not convert it to a Taber rating |
Equipos para esta solución
Las referencias de equipos se seleccionan según su proceso documentado. La dosificación principal, el suministro auxiliar y las rutas alternativas no constituyen un único paquete estándar.
Controles de proceso y verificaciones de aplicación
Evalúe estas funciones con el material, los moldes y el resumen de producción seleccionados. Los resultados de las piezas acabadas requieren su propia evidencia de aceptación.
Defined skin inspection
Agree the permitted pores, pinholes and texture variation instead of assuming a flawless surface.
Cleaning-specific validation
Test the actual disinfectant, concentration, exposure and repeated cleaning cycles.
Component-specific feel
Establish hardness and support response on the selected material and molded geometry.
Proyectos relacionados
Estas son referencias de aplicación relacionadas. Compare el material, el proceso y los módulos entregados reales; las cifras de proyecto reportadas no son resultados de aceptación para otra línea.

Proyecto de línea de PU de piel integral para mobiliario médico en Rusia

Proyecto de línea de PU de piel integral para reposabrazos de sillas de oficina en China
Preguntas frecuentes
Respuestas sobre la selección del proceso, la integración de equipos y el soporte en la entrega.
Does an integral skin repel every hospital disinfectant?
Does mold tilting eliminate pinholes?
¿Qué información se necesita para una configuración preliminar?
Hablemos de su proyecto de producción de muebles
Share the following with your production brief: Part and insert drawings, desired touch, surface finish, cleaning regime, abrasion method, shot mass and output. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.