مشروع خط ألواح ساندويتش PIR لمصنع صناعي في الصين
Supplied project reference for Industrial Plant PIR Sandwich Panel Line. Review the configuration and reported values against your own material, panel and acceptance conditions.
نظرة عامة على المشروع
تنبيه بشأن الرسم التوضيحي. الرسوم التوضيحية للعملية ليست صورًا فوتوغرافية موثّقة لهذا التجهيز.
أساس مرجعية المشروع. الأرقام وتفاصيل التكوين مُبلَّغ عنها في موجز المشروع المقدَّم. وهي قيم مرجعية للتطبيق المذكور، وليست نتائج قبول موثّقة ولا ضمانًا لتجهيز آخر. يجب التحقق من السجلات المصدرية والمواد والتجهيزات القالبية وجدول التشغيل وطريقة الاختبار عند تقييم مشروع مماثل.
الأرقام الواردة أدناه هي قيم مرجعية من موجز المشروع المُورَّد. وهي تصف هذا التكوين وليست نتائج معتمدة أو ضمانات لمشاريع أخرى.
رسم توضيحي تصوري — وليس صورة لمعدات مُسلَّمة أو لتركيب لدى عميل.
Haifeng successfully engineered and commissioned a complete continuous PIR sandwich panel production line for a major Chinese steel structure and architectural enclosure supplier, achieving a stabilized operational line speed of 12 m/min while recording a reported B1 panel classification. The project covered the turnkey installation of heavy-duty roll forming units, high-pressure cyclopentane-blown PIR metering systems, a 30-meter heated continuous double-belt laminator, an automated flying cross-cut saw, and automated vacuum suction stacking machinery.
Prior to commissioning, the customer utilized discontinuous foaming presses and manual lamination for industrial building panels. This legacy setup produced fewer than 800 m² per day, required excessive manual labor, and suffered from visible surface waviness (oil-canning) that failed pre-engineered building facade audits for international logistics hubs. The client required an automated, high-cadence continuous double-belt line capable of processing cyclopentane-blown PIR formulations, maintaining ±0.5mm thickness accuracy, and cutting finished panels to custom lengths without stopping the line.
Operational since July 2025 on a two-shift daily schedule across an 1,800 m² facility, the production line outputs over 4,500 m² of high-grade insulated panels per shift. By deploying Haifeng's synchronized high-pressure oscillating dispensing and heavy-duty 30m double-belt lamination, the client manufactures flat architectural wall and roof panels for the specified building-envelope requirements.
General Application Options (not the material scope of this project):
This project uses PIR core panels and a 30 m double-belt line, with sustained 12 m/min operation recorded on 50 mm wall panels. The PU/PIR/Rock Wool options below describe the broader application family; they do not indicate that all three core materials were delivered in this project. The related industrial-building solution presents a separate 24 m, 3–9 m/min reference configuration.
| وحدة الحل | الألواح النموذجية | مادة القلب | العملية الرئيسية | وضع الإنتاج النموذجي |
|---|---|---|---|---|
| Industrial Buildings & Warehouses | ألواح الجدران / الأسقف / القواطع | PU / PIR / الصوف الصخري | الرغوة / التصفيح | Continuous |
الإنتاجية المساحية لكل وردية هي مرجع مشروع مقدَّم. يجب تحديد العرض الفعّال، ومدة الوردية، ووقت التشغيل، وأوقات التغيير، ومردود الألواح المقبولة قبل استخلاص السعة المساحية أو مقارنتها.
تنفيذ الحلول
Haifeng deployed a heavy-duty continuous double-belt production architecture optimized for fast-curing, cyclopentane-blown polyisocyanurate (PIR) core formulations, ensuring continuous structural consistency across high line speeds:
1. Precision Roll Forming Integration: Dual-cassette profiling stations cold-roll pre-painted steel sheets into precise architectural tongue-and-groove wall designs and high-rib roof profiles, passing through sheet preheaters at 45°C.
2. Pentane-Safe High-Pressure Metering: Servo-driven high-pressure axial piston pumps in an explosion-proof safety enclosure meter PIR precursors at up to 200 bar, distributed via a high-speed servo-oscillating pour head across the moving bottom steel facing.
3. 30m Continuous Heated Double Belt: Precision-machined, high-rigidity chain plates exert uniform continuous pressure over a 30-meter length, ensuring controlled foam curing and tight ±0.5mm thickness tolerances.
4. Synchronous Flying Saw & Stacking Automation: A multi-axis flying saw cuts moving panels with ±2.0mm accuracy without halting the line, followed by an automated panel cooling turnover rack and vacuum suction stacking unit.
| المعدات | الطراز | الكمية | الوظيفة |
|---|---|---|---|
| Continuous PIR High-Pressure Metering Unit | HF-PIR-HP200 | وحدة واحدة | Stoichiometric dosing of polyol, isocyanate & cyclopentane at high pressure |
| Heavy-Duty 30m Double-Belt Laminator | HF-DBL-30M | وحدة واحدة | Continuous heated hydraulic lamination and thickness control (30–200mm) |
| Dual-Level Sheet Roll Forming System | HF-RF-DUAL | مجموعة واحدة | Cold roll forming for architectural wall and roof steel profiles |
| High-Speed Synchronous Flying Cut Saw | HF-SAW-SYNC | وحدة واحدة | Real-time continuous linear tracking and automated disc cutting |
| Master Line Industrial PLC Automation Suite | HF-PLC-LINE-V5 | مجموعة واحدة | Complete line speed coordination, recipe storage & safety interlocks |
عائلات المعدات ذات الصلة
- خط إنتاج ألواح PIR العازلة المتواصل | ألواح العزل
- نظام رغوة PU/PIR عالي الضغط خماسي المكونات | ألواح الساندويتش
تصف مراجع الكتالوج عائلات المعدات ذات الصلة. ويتبع الطراز المُسلَّم والملحقات وشروط القبول تكوين المشروع.
أرقام مرجعية للمشروع
ابدأ مشروعًا مماثلًا
شاركنا تطبيقك ونظام المواد لديك والطاقة الإنتاجية المستهدفة وظروف المصنع. سيرد فريقنا خلال يوم عمل واحد. وبمجرد أن تتضح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل.
