مشروع خط HP-RTM للعمود B المصنوع من ألياف الكربون للسيارات في الصين

سلّمت Haifeng خط HP-RTM آليًا لأعمدة B المصنوعة من ألياف الكربون، مما خفّض وزن مكوّن العمود B بنسبة 60% مع دورة قولبة/إزالة من القالب كاملة مُبلَّغ عنها مدتها 3 دقائق.

نظرة عامة على المشروع

تنبيه بشأن الرسم التوضيحي. الرسوم التوضيحية للعملية ليست صورًا فوتوغرافية موثّقة لهذا التجهيز.

أساس مرجعية المشروع. الأرقام وتفاصيل التكوين مُبلَّغ عنها في موجز المشروع المقدَّم. وهي قيم مرجعية للتطبيق المذكور، وليست نتائج قبول موثّقة ولا ضمانًا لتجهيز آخر. يجب التحقق من السجلات المصدرية والمواد والتجهيزات القالبية وجدول التشغيل وطريقة الاختبار عند تقييم مشروع مماثل.

Haifeng successfully engineered and commissioned an automated High-Pressure Resin Transfer Molding (HP-RTM) production line for a premier Chinese automotive composite manufacturer, slashing body-in-white B-pillar component weight by 60% with structural performance evaluated under the component program. The project covered the turnkey delivery of specialized high-pressure dual-component resin dosing units, dynamic mold vacuum control skids, and digital interface coordination for the customer's high-tonnage composite press.

Prior to commissioning, the manufacturer struggled with manufacturing cadence and quality consistency using conventional composite infusion. Liquid resin penetration across dense, multi-layer carbon fiber preforms took up to 40 minutes per part and frequently developed microscopic dry spots that failed rigorous side-impact crash simulations. The client required an industrial-scale manufacturing system capable of injecting fast-curing polyurethane resins at extreme pressures (up to 150 bar) into a vacuum-evacuated mold, locking stoichiometric accuracy within ±0.5% and compressing part cycle times down to 3 minutes.

Operational since October 2025 on a continuous two-shift production schedule across a 300 m² footprint, the workcell delivers consistent component repeatability. By deploying Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement injection heads, the client reliably manufactures carbon-fiber B-pillars for the stated component qualification program.

التخطيط لخط إنتاج ذي صلة

Use this record as an application-specific reference. Reinforcement introduction, resin chemistry, tooling, consolidation and qualification differ between RIM, LFI, SMC and HP-RTM. A result from one process does not establish performance of another.

موجز الإنتاج للمناقشة التقنية

قدّم رسمًا أو عينة للمنتج النهائي، وبيانات المواد، والطاقة الإنتاجية المستهدفة، واحتياجات الأتمتة، وظروف المصنع. ستراجع Haifeng العملية وواجهات المعدات وخطة القبول وفقًا لأهداف الإنتاج الخاصة بكم.

رسم توضيحي تصوري — وليس صورة لمعدات مُسلَّمة أو لتركيب لدى عميل.

The reported 60% weight reduction concerns this project’s B-pillar component and its conventional ultra-high-strength steel assembly baseline. The 3-minute value covers preform loading through the demolded part, not injection or cure alone. The recorded zero dry spots is an observation for the inspected project parts, not a universal zero-defect guarantee. Component and vehicle crash qualification remain distinct from machine acceptance.

تنفيذ الحلول

Haifeng deployed a heavy-capacity HP-RTM injection architecture engineered for rapid cavity wet-out and fast-reacting structural formulations, coordinating the reported 3-minute complete molding/demolding cycle for this project configuration:
1. Closed-Loop High-Pressure Metering: Servo-driven axial displacement pumps meter resin and hardener at up to 150 bar with ±0.5% stoichiometric precision, coordinating resin flow for the stated 55% fiber-volume configuration.
2. Deep Vacuum Evacuation System: An integrated high-vacuum pump pulls mold cavity pressure down to <10 mbar before injection begins, supporting control of entrained air; part defects require inspection.
3. Multi-Circuit Dynamic Thermal Stability: Specialized TCU units actively stabilize mold half temperatures within ±0.8°C, accelerating polymerization while managing the intense exothermic heat spike.
4. Self-Cleaning High-Pressure Injection Head: An L-shaped impingement mixing head mounted directly to the tool executes instantaneous 0.3-second mechanical clean cut-offs without chemical solvent flushes.

المعداتالطرازالكميةالوظيفة
High-Pressure HP-RTM Dosing MachineHF-RTM-HP150وحدة واحدةStoichiometric ratio metering and extreme-pressure resin injection (up to 150 bar)
Multi-Channel Tooling Vacuum SkidHF-VAC-RTMمجموعة واحدةHigh-vacuum mold evacuation and cavity pressure telemetry monitoring
Dual-Circuit Dynamic Mold Temperature ControllerHF-TCU-48وحدتانPrecision dynamic oil/water thermal balancing for high-temperature composite tooling
خزانة PLC صناعية متكاملةHF-PLC-COMPACTمجموعة واحدةComplete process sequence control, real-time telemetry, and press safety interlocks

نتائج المشروع

60%
تقليل الوزن
Structural B-pillar weight saved compared to conventional ultra-high-strength steel assemblies
3 min
دورة نزع القالب
Total cycle duration per carbon composite B-pillar from preform loading to demolded part
0
Dry Spot Defects
Zero internal dry spots or micro-voids detected across dense structural reinforcement zones; refers to the inspected project parts and recorded inspection conditions, not every future part or vehicle crash validation.

أرسل أهداف إنتاجك

شاركنا تطبيقك ونظام المواد لديك والطاقة الإنتاجية المستهدفة وظروف المصنع. سيرد فريقنا خلال يوم عمل واحد. وبمجرد أن تتضح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube