Проект линии HP-RTM для автомобильных углепластиковых B-стоек в Китае
Haifeng поставила автоматизированную линию HP-RTM для B-стоек из углеродного волокна, снизив массу компонента B-стойки на 60% при заявленном полном цикле формования и раскрытия пресс-формы продолжительностью 3 минуты.
Обзор проекта
Примечание об иллюстрации. Иллюстрации процесса не являются проверенными фотографиями данной установки.
Основание проекта как референса. Цифры и сведения о конфигурации приведены в предоставленном описании проекта. Это справочные значения для указанного применения, а не подтверждённые результаты приёмки или гарантия для другой установки. При оценке аналогичного проекта проверяйте исходные записи, материал, оснастку, режим работы и метод испытаний.
Haifeng successfully engineered and commissioned an automated High-Pressure Resin Transfer Molding (HP-RTM) production line for a premier Chinese automotive composite manufacturer, slashing body-in-white B-pillar component weight by 60% with structural performance evaluated under the component program. The project covered the turnkey delivery of specialized high-pressure dual-component resin dosing units, dynamic mold vacuum control skids, and digital interface coordination for the customer's high-tonnage composite press.
Prior to commissioning, the manufacturer struggled with manufacturing cadence and quality consistency using conventional composite infusion. Liquid resin penetration across dense, multi-layer carbon fiber preforms took up to 40 minutes per part and frequently developed microscopic dry spots that failed rigorous side-impact crash simulations. The client required an industrial-scale manufacturing system capable of injecting fast-curing polyurethane resins at extreme pressures (up to 150 bar) into a vacuum-evacuated mold, locking stoichiometric accuracy within ±0.5% and compressing part cycle times down to 3 minutes.
Operational since October 2025 on a continuous two-shift production schedule across a 300 m² footprint, the workcell delivers consistent component repeatability. By deploying Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement injection heads, the client reliably manufactures carbon-fiber B-pillars for the stated component qualification program.
Планирование смежной производственной линии
Use this record as an application-specific reference. Reinforcement introduction, resin chemistry, tooling, consolidation and qualification differ between RIM, LFI, SMC and HP-RTM. A result from one process does not establish performance of another.
Производственное задание для технического обсуждения
Предоставьте чертёж или образец готового изделия, данные о материалах, целевой объём выпуска, требования к автоматизации и условия на заводе. Haifeng рассмотрит технологический процесс, интерфейсы оборудования и план приёмки применительно к вашим собственным производственным целям.
Концептуальная иллюстрация — не фотография поставленного оборудования или установки у заказчика.
The reported 60% weight reduction concerns this project’s B-pillar component and its conventional ultra-high-strength steel assembly baseline. The 3-minute value covers preform loading through the demolded part, not injection or cure alone. The recorded zero dry spots is an observation for the inspected project parts, not a universal zero-defect guarantee. Component and vehicle crash qualification remain distinct from machine acceptance.
Реализация решений
Haifeng deployed a heavy-capacity HP-RTM injection architecture engineered for rapid cavity wet-out and fast-reacting structural formulations, coordinating the reported 3-minute complete molding/demolding cycle for this project configuration:
1. Closed-Loop High-Pressure Metering: Servo-driven axial displacement pumps meter resin and hardener at up to 150 bar with ±0.5% stoichiometric precision, coordinating resin flow for the stated 55% fiber-volume configuration.
2. Deep Vacuum Evacuation System: An integrated high-vacuum pump pulls mold cavity pressure down to <10 mbar before injection begins, supporting control of entrained air; part defects require inspection.
3. Multi-Circuit Dynamic Thermal Stability: Specialized TCU units actively stabilize mold half temperatures within ±0.8°C, accelerating polymerization while managing the intense exothermic heat spike.
4. Self-Cleaning High-Pressure Injection Head: An L-shaped impingement mixing head mounted directly to the tool executes instantaneous 0.3-second mechanical clean cut-offs without chemical solvent flushes.
| Оборудование | Модель | Кол-во | Функция |
|---|---|---|---|
| High-Pressure HP-RTM Dosing Machine | HF-RTM-HP150 | 1 шт. | Stoichiometric ratio metering and extreme-pressure resin injection (up to 150 bar) |
| Multi-Channel Tooling Vacuum Skid | HF-VAC-RTM | 1 комплект | High-vacuum mold evacuation and cavity pressure telemetry monitoring |
| Dual-Circuit Dynamic Mold Temperature Controller | HF-TCU-48 | 2 шт. | Precision dynamic oil/water thermal balancing for high-temperature composite tooling |
| Встроенный промышленный шкаф ПЛК | HF-PLC-COMPACT | 1 комплект | Complete process sequence control, real-time telemetry, and press safety interlocks |
Связанные семейства оборудования
Ссылки на каталог описывают связанные семейства оборудования. Поставленная модель, вспомогательное оборудование и условия приемки определяются конфигурацией проекта.
Результаты проекта
Опишите свои производственные задачи
Расскажите о вашей задаче, системе материалов, целевом объёме выпуска и условиях на производстве. Наша команда ответит в течение одного рабочего дня. После уточнения требований мы в течение двух рабочих дней предоставим предварительное предложение.
