Proyecto de línea HP-RTM para pilar B de fibra de carbono automotriz en China
Haifeng delivered an automated HP-RTM line for carbon fiber B-pillars, reducing B-pillar component weight by 60% with a reported 3-minute complete molding/demolding cycle.
Resumen del proyecto
Aviso sobre las ilustraciones. Las ilustraciones del proceso no son fotografías verificadas de esta instalación.
Base de la referencia del proyecto. Las cifras y los detalles de configuración se reportan en el resumen del proyecto suministrado. Son valores de referencia para la aplicación indicada, y no resultados de aceptación verificados ni una garantía para otra instalación. Confirme los registros de origen, el material, el utillaje, el programa de operación y el método de ensayo al evaluar un proyecto comparable.
Haifeng successfully engineered and commissioned an automated High-Pressure Resin Transfer Molding (HP-RTM) production line for a premier Chinese automotive composite manufacturer, slashing body-in-white B-pillar component weight by 60% with structural performance evaluated under the component program. The project covered the turnkey delivery of specialized high-pressure dual-component resin dosing units, dynamic mold vacuum control skids, and digital interface coordination for the customer's high-tonnage composite press.
Prior to commissioning, the manufacturer struggled with manufacturing cadence and quality consistency using conventional composite infusion. Liquid resin penetration across dense, multi-layer carbon fiber preforms took up to 40 minutes per part and frequently developed microscopic dry spots that failed rigorous side-impact crash simulations. The client required an industrial-scale manufacturing system capable of injecting fast-curing polyurethane resins at extreme pressures (up to 150 bar) into a vacuum-evacuated mold, locking stoichiometric accuracy within ±0.5% and compressing part cycle times down to 3 minutes.
Operational since October 2025 on a continuous two-shift production schedule across a 300 m² footprint, the workcell delivers consistent component repeatability. By deploying Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement injection heads, the client reliably manufactures carbon-fiber B-pillars for the stated component qualification program.
Planificación de una línea de producción relacionada
Use this record as an application-specific reference. Reinforcement introduction, resin chemistry, tooling, consolidation and qualification differ between RIM, LFI, SMC and HP-RTM. A result from one process does not establish performance of another.
Resumen de producción para el debate técnico
Facilite un plano o una muestra del producto terminado, los datos del material, la producción objetivo, las necesidades de automatización y las condiciones de la fábrica. Haifeng revisará el proceso, las interfaces del equipo y el plan de aceptación para sus propios objetivos de producción.
Ilustración conceptual — no es una fotografía del equipo entregado ni de una instalación de un cliente.
The reported 60% weight reduction concerns this project’s B-pillar component and its conventional ultra-high-strength steel assembly baseline. The 3-minute value covers preform loading through the demolded part, not injection or cure alone. The recorded zero dry spots is an observation for the inspected project parts, not a universal zero-defect guarantee. Component and vehicle crash qualification remain distinct from machine acceptance.
Entrega de soluciones
Haifeng deployed a heavy-capacity HP-RTM injection architecture engineered for rapid cavity wet-out and fast-reacting structural formulations, coordinating the reported 3-minute complete molding/demolding cycle for this project configuration:
1. Closed-Loop High-Pressure Metering: Servo-driven axial displacement pumps meter resin and hardener at up to 150 bar with ±0.5% stoichiometric precision, coordinating resin flow for the stated 55% fiber-volume configuration.
2. Deep Vacuum Evacuation System: An integrated high-vacuum pump pulls mold cavity pressure down to <10 mbar before injection begins, supporting control of entrained air; part defects require inspection.
3. Multi-Circuit Dynamic Thermal Stability: Specialized TCU units actively stabilize mold half temperatures within ±0.8°C, accelerating polymerization while managing the intense exothermic heat spike.
4. Self-Cleaning High-Pressure Injection Head: An L-shaped impingement mixing head mounted directly to the tool executes instantaneous 0.3-second mechanical clean cut-offs without chemical solvent flushes.
| Equipos | Modelo | Cant. | Función |
|---|---|---|---|
| High-Pressure HP-RTM Dosing Machine | HF-RTM-HP150 | 1 unidad | Stoichiometric ratio metering and extreme-pressure resin injection (up to 150 bar) |
| Multi-Channel Tooling Vacuum Skid | HF-VAC-RTM | 1 juego | High-vacuum mold evacuation and cavity pressure telemetry monitoring |
| Dual-Circuit Dynamic Mold Temperature Controller | HF-TCU-48 | 2 unidades | Precision dynamic oil/water thermal balancing for high-temperature composite tooling |
| Integrated Industrial PLC Cabinet | HF-PLC-COMPACT | 1 juego | Complete process sequence control, real-time telemetry, and press safety interlocks |
Familias de equipos relacionados
Las referencias del catálogo describen familias de equipos relacionados. El modelo entregado, los equipos auxiliares y las condiciones de aceptación se rigen por la configuración del proyecto.
Resultados del proyecto
Envíe sus objetivos de producción
Comparta su aplicación, sistema de materiales, producción objetivo y condiciones de la fábrica. Nuestro equipo le responderá en un día hábil. Una vez aclarados los requisitos, le proporcionamos una propuesta preliminar en un plazo de dos días hábiles.
