آلة صب PU ثلاثية المكوّنات | عزل بدرجات حرارة منخفضة للغاية
قياس الجرعات وخلط ديناميكي للبولي يوريثان بثلاثة تدفقات لتطوير العزل المبرّد، مع تحكّم منفصل بالإضافات واعتماد للمواد.
معدل تدفق التصريف
5.0 إلى 45.0 كجم/دقيقة (قابل للتعديل المستمر)
نسبة الخلط (A:B:C)
100:110:5 to 100:150:20 (By weight)
مرجع الدقة
±0.2% (في ظل التتبع المستمر للتدفق الكتلي بطريقة كوريوليس)
ضغط التشغيل
0.3 إلى 0.6 MPa (خطوط قياس الجرعات ورأس الخلط الديناميكي)
Deep-Cryogenic Low-Exotherm Polyurethane Casting for LNG Carriers
قياس الجرعات وخلط ديناميكي للبولي يوريثان بثلاثة تدفقات لتطوير العزل المبرّد، مع تحكّم منفصل بالإضافات واعتماد للمواد.
Three-stream PU material preparation, metering and dynamic mixing are configured for cryogenic-insulation development. The primary reactive streams and independent additive feed require their own calibration and material-contact review.
Molds, curing equipment, chemical formulation and finished insulation qualification are specified separately. Cryogenic crack resistance, reaction heat and thermal conductivity depend on the material and specimen conditions.
رسم تصوري: رسم توضيحي مُولَّد لمناقشة العملية؛ وليس صورة للآلة المحددة أو لمنشأة عميل أو لمشروع مُسلَّم.

تدفق المواد ومبدأ العمل
Condition the Material Streams
Prepare the primary PU components and the independent additive for the selected insulation formulation.
Calibrate Metering
Check the primary ratio and the separate additive loading under the actual material and operating conditions.
Mix and Fill the Mold
Coordinate dynamic mixing, shot delivery and mold filling with the selected insulation geometry.
Cure and Qualify Samples
Use the specified cure and conditioning procedure, then test representative insulation specimens against the agreed cryogenic requirements.
هل تحتاج إلى عرض سعر لهذه المعدات؟
اطلب عرض سعرالطراز والمعايير الفنية
The listed equipment references concern material conditioning, primary-stream metering, independent additive delivery and dynamic mixing. Cryogenic service, material test results and project approvals are separate acceptance requirements.
| المعلمة الفنية | HF-LNG163-3K |
|---|---|
| المكوّنات | 3 Streams (A: Base Polyol, B: Polymeric MDI, C: Toughener/Additive) |
| نطاق الإخراج | 5.0 إلى 45.0 كجم/دقيقة (قابل للتعديل المستمر) |
| نطاق نسبة الخلط | 100:110:5 to 100:150:20 (By weight) |
| مرجع الدقة | ±0.2% (في ظل التتبع المستمر للتدفق الكتلي بطريقة كوريوليس) |
| مصدر الطاقة | 380 فولت، ثلاثي الأطوار، 50 هرتز (اختياري مخصص 440 فولت/480 فولت 60 هرتز) |
| ضغط التشغيل | 0.3 إلى 0.6 MPa (خطوط قياس الجرعات ورأس الخلط الديناميكي) |
| سعة الخزان / القادوس | Tank A: 150 L, Tank B: 150 L, Tank C: 50 L (Stainless 316L) |
| الوزن | 3,850 kg (Main proportioning skid and mixing station) |
| الأبعاد (الطول×العرض×الارتفاع) | 3600 mm x 2200 mm x 2450 mm |
الميزات الرئيسية للمعدات
Conditioned primary streams, an independent additive feed, dynamic head and controls; molds, curing equipment, approved chemical formulation and final insulation qualification are separate interfaces.
Cryogenic Material Trials
Evaluate the intended formulation and representative insulation specimens under the selected thermal and mechanical test conditions.
Reaction and Cure Coordination
Coordinate shot size, tool conditions and cure with the formulation and insulation thickness. Peak reaction heat is evaluated for that material and geometry.
Independent Additive Delivery
The third feed is calibrated separately from the main component ratio. Select compatible hardware for the actual additive and any suspended particles.
Defined Qualification Interfaces
Equipment supply is coordinated with material, component and project qualification responsibilities. Applicable approvals require the actual scope and supporting documentation.
ناقش تكوين معداتك
شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.
الأسئلة الشائعة
What is included in the three-stream configuration?
Does a liquid-nitrogen trial establish LNG service approval?
How is the additive stream calibrated?
هل يمكن توصيلها بمناولة القوالب الآلية؟
هل أنت مستعد لمناقشة مشروعك؟
تواصل مع فريقنا