Проект напыления логистического хаба холодовой цепи в Китае
Project reference: Cold Chain Logistics Hub Spray Project. Configuration and reported outcomes require original project records.
Обзор проекта
Примечание об иллюстрации. Иллюстрации процесса не являются проверенными фотографиями данной установки.
Основание проекта как референса. Цифры и сведения о конфигурации приведены в предоставленном описании проекта. Это справочные значения для указанного применения, а не подтверждённые результаты приёмки или гарантия для другой установки. При оценке аналогичного проекта проверяйте исходные записи, материал, оснастку, режим работы и метод испытаний.
A leading national cold chain logistics infrastructure group in Central China deployed Haifeng’s high-lift mobile hydraulic spray equipment to insulate the external concrete walls and space-frame roof of a 100,000-ton national logistics storage hub. The project covered 85,000 m² of exterior surfaces reaching elevations up to 42 meters.
The extreme building height presented severe challenges for conventional pneumatic spray units. Standard units lost over 50% of fluid pressure at elevations above 20 meters, forcing crews to crane chemical drums and compressors onto suspended scaffolding, which created grave safety risks and limited single-machine production to just 800 m²/day. Pressure variations also produced low foam densities and poor compressive strengths (under 120 kPa), leaving irregular surface ridges exceeding 18 mm.
Haifeng supplied two truck-mounted HF-SPR60-MOB hydraulic high-lift spraying systems. Stationed at ground level, the rigs pumped chemicals vertically up 45 meters through 60-meter heated umbilical lines at 17.5 MPa. The operation achieved over 2,500 m² of daily coverage per rig, delivering seamless 150 mm thick insulation with compressive strengths reaching 185 kPa and surface flatness within 4.5 mm.
Ограничения данных: Vertical lift, hose length and gun pressure require a complete loss calculation; hydraulic drive does not eliminate hydrostatic or friction losses. Coverage requires thickness, density, material use, overspray and actual spraying duty. A 2,550 m²/day area at 150 mm thickness is 382.5 m³/day before overspray; its consistency with 14 kg/min maximum output and the supplied foam density remains unverified. Foam fire classification and installation acceptance are separate from equipment delivery.
Концептуальная иллюстрация: Сгенерированная концептуальная иллюстрация для обсуждения процесса; это не фотография указанной машины, предприятия заказчика или реализованного проекта.
Реализация решений
Конфигурация, указанная в предоставленном техническом задании.
Haifeng engineered an agile, ground-based mobile spraying package mounted directly onto commercial flatbed trucks. The 42-meter-tall concrete walls were cleared of dust and rolled with a polyurethane bonding primer.
Two mobile HF-SPR60-MOB rigs drew polyol and polymeric isocyanates directly from 200 L drums on the truck beds. Coaxial hydraulic proportioning cylinders maintained non-pulsing fluid delivery at 17.5 MPa. Chemical streams passed through 18 kW primary heaters and were routed vertically up scaffolding via 60-meter copper-mesh heated hoses, maintaining fluid temperatures at 50°C right at the spray gun nozzles.
Operators working from motorized cherry-picker platforms applied the fast-reacting foam in four progressive 35–40 mm passes, building a monolithic 150 mm thick envelope. The foam set within 6 seconds, preventing sagging on vertical walls. The continuous seamless barrier decoupled the building structure from exterior ambient heat, while surface scraping tools held flatness variations strictly within 4.5 mm.
Vertical lift, hose length and gun pressure require a complete loss calculation; hydraulic drive does not eliminate hydrostatic or friction losses. Coverage requires thickness, density, material use, overspray and actual spraying duty. A 2,550 m²/day area at 150 mm thickness is 382.5 m³/day before overspray; its consistency with 14 kg/min maximum output and the supplied foam density remains unverified. Foam fire classification and installation acceptance are separate from equipment delivery.
| Оборудование | Модель | Кол-во | Функция |
|---|---|---|---|
| High-Lift Mobile Polyurethane Spray Rig | HF-SPR60-MOB | 2 комплекта | Core hydraulic proportioning, 18 kW heating, and 60m vertical pumping. |
| 60-Meter Copper-Mesh Heated Hose Reel | HF-CHR-60M | 2 комплекта | Heated delivery lines maintaining 50°C to elevated scaffolding platforms. |
| Self-Cleaning Air-Purge Spray Gun Set | HF-APG-02 | 4 единицы | Solvent-free impingement atomization and automated high-pressure air blast. |
| Heavy-Duty Pneumatic Drum Transfer Pumps | HF-DTP-02 | 4 единицы | Continuous raw material transfer from 200 L chemical drums. |
Связанные семейства оборудования
Ссылки на каталог описывают связанные семейства оборудования. Поставленная модель, вспомогательное оборудование и условия приемки определяются конфигурацией проекта.
Заявленные результаты — требуются первичные протоколы

Accelerate Large-Scale Cold Storage Wall Insulation
Расскажите о вашей задаче, системе материалов, целевом объёме выпуска и условиях на производстве. Наша команда ответит в течение одного рабочего дня. После уточнения требований мы в течение двух рабочих дней предоставим предварительное предложение.
