Оборудование для производства синтетической кожи
135 просмотров

Линия коагуляции и промывки DMF | Кожа мокрого процесса

Многоступенчатый комплекс коагуляции DMF/воды и противоточной промывки с контролируемой циркуляцией и интерфейсами регенерации.

Water Circulation Flow

Wash water circulation: 10.0 to 60.0 m³/hour

Circulation Pressure

0.2 to 0.4 MPa (Circulation and spray piping)

Tank Array

Multi-tank array: 6 x 3,500 L (Stainless steel 304 sealed)

Line Dimensions

36,000 mm x 2,800 mm x 2,200 mm

Наличие по запросу Срок поставки — по предложению Гарантия 1 год
Low-Energy DMF Coagulation & Distillation Optimization

Multi-Stage Countercurrent Washing for Wet Synthetic Leather

Многоступенчатый комплекс коагуляции DMF/воды и противоточной промывки с контролируемой циркуляцией и интерфейсами регенерации.

Multistage DMF/water coagulation and countercurrent washing are configured with circulation, concentration monitoring and web-handling interfaces. Distillation, extraction, wastewater treatment and upstream coating are separately identified in the supply scope.

Effluent concentration and a reactive-resin mixing ratio are different quantities. Optical concentration monitoring requires calibration for the actual composition and temperature. Water consumption, solvent recovery and energy use are evaluated within a defined process boundary.

Концептуальная иллюстрация: Сгенерированная иллюстрация для обсуждения процесса; не фотография указанной машины, объекта заказчика или реализованного проекта.

Multi-Stage Countercurrent Washing for Wet Synthetic Leather

Поток материалов и принцип работы

Set the Coagulation Process

Configure the DMF/water tanks, web path and solution conditions for the selected upstream coated substrate.

Run Countercurrent Washing

Coordinate water replenishment, circulation and web residence through the selected stages.

Monitor and Transfer Effluent

Use calibrated concentration measurements to coordinate replenishment and the separately defined recovery interface.

Inspect and Handle the Web

Check the washed substrate and transfer it to the agreed downstream process; verify solvent and wastewater results within the defined plant scope.

Нужно коммерческое предложение на это оборудование?

Запросить предложение
Данные конфигурации

Модель и технические параметры

Reference data describe the selected coagulation, washing, circulation and concentration-monitoring package. Recovery purity, water use, steam demand and emission performance require the corresponding process balance and acceptance measurements.

Технический параметрHF-WET200-REC
КомпонентыMulti-Stage Fluid System (Water + DMF Solvent Recycle)
Диапазон производительностиWash water circulation: 10.0 to 60.0 m³/hour
Электропитание380 В, 3 фазы, 50 Гц (по заказу 440 В/480 В 60 Гц)
Рабочее давление0.2 to 0.4 MPa (Circulation and spray piping)
Объём бака / бункераMulti-tank array: 6 x 3,500 L (Stainless steel 304 sealed)
Масса14,200 kg (Complete 6-stage washing tanks and piping array)
Габариты (Д×Ш×В)36,000 mm x 2,800 mm x 2,200 mm
Target effluent DMF concentrationEffluent DMF Concentration 18% to 22% (Target steady state); supplied configuration reference, see review point
Refractometer reference; calibration required±0.5% Brix / Concentration (Digital optical refractometer); supplied configuration reference, see review point
Комплектация оборудования

Ключевые особенности оборудования

Configured coagulation/washing tanks, circulation pumps, fluid monitoring and web-handling interfaces. Distillation, extraction, wastewater treatment and upstream coating scope are separately agreed.

Recovery-System Interfaces

Coordinate washing effluent concentration and transfer with the separately sized solvent-recovery plant.

Countercurrent Washing

The staged arrangement directs cleaner water toward the final washing zone. Actual water demand follows web loading, residual-solvent targets and the selected operating balance.

Calibrated Concentration Monitoring

Calibrate the optical instrument for the DMF/water composition and temperature before using its reading to control replenishment.

Configured Vapor Extraction

Coordinate enclosed extraction with the site recovery system and installed-process measurements.

Обсудите конфигурацию вашего оборудования

Сообщите о вашей продукции, материалах, оснастке и требованиях к производству, чтобы мы могли рассмотреть оборудование и интерфейсы для вашего проекта.

Вопросы планирования

Часто задаваемые вопросы

What is included in the washing package?
Identify tanks, circulation, web handling, monitoring and control valves. Distillation, extraction, wastewater treatment and upstream coating are specified separately.
Does a Brix reading directly give DMF concentration?
The instrument needs a composition- and temperature-specific calibration. Define the sampling and reference measurement method for the actual solution.
Can an existing line be retrofitted?
Review available space, web paths, tank interfaces, controls, circulation and the site recovery system. Define installation stages and downtime for that existing line.
How are water and steam savings verified?
Compare equivalent production conditions using water, solvent and energy balances for a stated process boundary. A concentration target alone does not establish a fixed saving.

Готовы обсудить ваш проект?

Свяжитесь с нашей командой
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube