Semi-Rigid PU Protective Component Molding Solution Banner background

Solución de moldeo de componentes protectores de PU semirrígido

Configure semi-rigid PU protective parts around the required impact response, geometry and insert arrangement.

85%+ Reference: Impact Kinetic Energy Absorption
60–120kg/m³ Reference: Controlled Semi-Rigid Density
90s Referencia: Tiempo de ciclo de desmoldeo
Impact & Safety Engineering

Precision Semi-Rigid Polyurethane Solutions for Protective Furniture Components

Protective furniture parts balance shape retention and cushioning for a specified contact and impact condition. Material density or tensile elongation alone does not establish injury prevention or prevent bottoming out. The finished part must be assessed with its mounting, underlying structure and intended use.

Alcance de suministro definido

Agree metering, tooling, insert placement and handling. Child-use or healthcare suitability requires the relevant material and finished-product evidence, separate from the molding equipment.

Insumos para la selección del proceso

Part and frame drawings, contact/impact conditions, mounting inserts, material restrictions and production target.

Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Agree metering, tooling, insert placement and handling. Child-use or healthcare suitability requires the relevant material and finished-product evidence, separate from the molding equipment.

Ruta de producción

Semi-Rigid PU Protective Component Molding Workflow

Define the protection duty → Prepare inserts and tooling → Meter and mold → Inspect and test. Define preparation, filling, cure and output timing separately for the selected configuration.

01

Define the protection duty

Identify contact geometry, support structure and the required impact evaluation.

02

Prepare inserts and tooling

Locate mounting components and establish the material/mold preparation.

03

Dosificar y moldear

Validate filling, expansion and cure for the part sections.

Configuración y parámetros del proceso

Especificaciones técnicas

Configuración existente y referencias de ensayo. Los ajustes del equipo, los resultados del material y los resultados del conjunto terminado son independientes; aplique cada valor solo a su configuración y condiciones documentadas.

Parámetro técnicoEspecificación estándar / ValorContexto de ingeniería y verificación
Aplicación objetivoStructural Padded Components, Corner Edge ProtectorsFurniture impact absorption & cushioning
Matriz del materialMicrocellular Semi-Rigid Polyurethane FoamEnergy-dissipating open/closed cell matrix
Rango de densidad del núcleo60 – 120 kg/m³High shock-absorbing structural matrix
Energy Absorption Rating>85% Kinetic Energy DissipationReference target; applies to the agreed impact-test method and specimen
Capacidad de dosificación20 – 60 kg/min (personalizable)Fast-shot servo displacement pumps
Tiempo de ciclo de desmoldeo75 – 110 seconds (Standard 90 s)Rapid multi-fixture carousel output
Tensile Elongation120% – 180%High tear resistance against sharp impacts
Existing application note: Confirm specifications against the selected formulation, tooling and operating conditions before final equipment selection. Original process references, with their existing values: Mold Preheating: 45°C–52°C | Clamping Time: <5 s | Dual TCU Water Loops; Metering Pressure: 160–180 bar | Shot Accuracy: ±0.5% | Cut-Off: 0.3 s; Cavity Pressure: 0.15–0.35 MPa | Core Density: 60–120 kg/m³ | Exotherm: 60–80 s; Total Cadence: ~90 s | Energy Dissipation: >85% | Tear Strength: >35 kN/m. Supplementary references: delivery up to 180 bar, injection 1.5–2.5 seconds, demolding 90 seconds and site work up to 18 days. Confirm the formulation, tool and time boundaries; these figures do not by themselves establish injury protection. The density reference includes the upper value 120 kg/m³. The original site-work range is 14 to 18 days; neither value is a general protective-performance or delivery guarantee. Confirm the configuration, material, test method and cycle endpoints before using reference values as acceptance commitments.
Aspectos técnicos a considerar

Controles de proceso y verificaciones de aplicación

Evalúe estas funciones con el material, los moldes y el resumen de producción seleccionados. Los resultados de las piezas acabadas requieren su propia evidencia de aceptación.

Defined impact criteria

Use a specified impact energy, specimen and endpoint to evaluate cushioning.

Insert and mounting control

Coordinate fixtures, encapsulation and interface inspection for the actual bracket.

Application-specific material review

Review material exposure and use requirements instead of applying a generic non-toxic label.

Aplicaciones y proyectos relacionados

Proyectos relacionados

Estas son referencias de aplicación relacionadas. Compare el material, el proceso y los módulos entregados reales; las cifras de proyecto reportadas no son resultados de aceptación para otra línea.

Ver proyecto
Preguntas sobre planificación de la producción

Preguntas frecuentes

Respuestas sobre la selección del proceso, la integración de equipos y el soporte en la entrega.

Does semi-rigid foam automatically make a child-safe component? +
No. Part design, materials, mounting and applicable product tests must be assessed for the intended use.
Does an energy-absorption percentage establish protection in every impact? +
No. Confirm input energy, mass/velocity, specimen, support and calculation method before interpreting that result.
¿Qué información se necesita para una configuración preliminar? +
Part and frame drawings, contact/impact conditions, mounting inserts, material restrictions and production target. Identify the equipment and interfaces to retain, plus the required test and acceptance documents.

Hablemos de su proyecto de producción de muebles

Share the following with your production brief: Part and frame drawings, contact/impact conditions, mounting inserts, material restrictions and production target. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Revisión de la configuración basada en la aplicación y los datos del material Documentación acordada de equipo, interfaces y aceptación Formación y soporte definidos para el paquete suministrado
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube