
حل قولبة مكوّنات الحماية من البولي يوريثان شبه الصلب
Configure semi-rigid PU protective parts around the required impact response, geometry and insert arrangement.
Precision Semi-Rigid Polyurethane Solutions for Protective Furniture Components
Protective furniture parts balance shape retention and cushioning for a specified contact and impact condition. Material density or tensile elongation alone does not establish injury prevention or prevent bottoming out. The finished part must be assessed with its mounting, underlying structure and intended use.
نطاق توريد محدد
Agree metering, tooling, insert placement and handling. Child-use or healthcare suitability requires the relevant material and finished-product evidence, separate from the molding equipment.
المدخلات لاختيار العملية
Part and frame drawings, contact/impact conditions, mounting inserts, material restrictions and production target.
Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Agree metering, tooling, insert placement and handling. Child-use or healthcare suitability requires the relevant material and finished-product evidence, separate from the molding equipment.
Semi-Rigid PU Protective Component Molding Workflow
Define the protection duty → Prepare inserts and tooling → Meter and mold → Inspect and test. Define preparation, filling, cure and output timing separately for the selected configuration.
Define the protection duty
Identify contact geometry, support structure and the required impact evaluation.
Prepare inserts and tooling
Locate mounting components and establish the material/mold preparation.
القياس والقولبة
Validate filling, expansion and cure for the part sections.
المواصفات الفنية
مراجع التكوين الحالي والاختبار. تُعد إعدادات المعدات ونتائج المواد ونتائج التجميع النهائي منفصلة؛ ويُطبَّق كل قيمة فقط على التكوين والظروف الموثقة الخاصة بها.
| المعلمة الفنية | المواصفة القياسية / القيمة | السياق الهندسي & التحقق |
|---|---|---|
| التطبيق المستهدف | Structural Padded Components, Corner Edge Protectors | Furniture impact absorption & cushioning |
| مصفوفة المواد | Microcellular Semi-Rigid Polyurethane Foam | Energy-dissipating open/closed cell matrix |
| نطاق كثافة اللب | 60 – 120 kg/m³ | High shock-absorbing structural matrix |
| Energy Absorption Rating | >85% Kinetic Energy Dissipation | Reference target; applies to the agreed impact-test method and specimen |
| قدرة إخراج قياس الجرعات | 20 – 60 كغ/دقيقة (قابلة للتخصيص) | Fast-shot servo displacement pumps |
| زمن دورة نزع القالب | 75 – 110 seconds (Standard 90 s) | Rapid multi-fixture carousel output |
| Tensile Elongation | 120% – 180% | High tear resistance against sharp impacts |
ضوابط العملية وفحوص التطبيق
قيّم هذه الوظائف باستخدام المادة والتجهيزات القالبية الموجزة الإنتاجية المختارة. تتطلب نتائج الأجزاء النهائية أدلة قبول خاصة بها.
Defined impact criteria
Use a specified impact energy, specimen and endpoint to evaluate cushioning.
Insert and mounting control
Coordinate fixtures, encapsulation and interface inspection for the actual bracket.
Application-specific material review
Review material exposure and use requirements instead of applying a generic non-toxic label.
مشاريع ذات صلة
هذه مراجع تطبيقية ذات صلة. قارن المادة الفعلية والعملية والوحدات المسلّمة؛ فأرقام المشاريع المبلَّغ عنها ليست نتائج قبول لخط آخر.
الأسئلة الشائعة
إجابات حول اختيار العملية وتكامل المعدات ودعم التسليم.
Does semi-rigid foam automatically make a child-safe component?
Does an energy-absorption percentage establish protection in every impact?
ما المعلومات المطلوبة لإعداد تكوين أولي؟
ناقش مشروع إنتاج الأثاث الخاص بك
Share the following with your production brief: Part and frame drawings, contact/impact conditions, mounting inserts, material restrictions and production target. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

