
Solución de moldeo de ruedas macizas de PU puro para maquinaria de construcción
Plan molded solid PU wheels for worksite transport and construction wheels using the actual hub, shot and operating duty.
Worksite Construction Equipment PU Wheel Manufacturing Configuration
This route concerns new molded polyurethane wheels for worksite transport and construction wheels. Hub preparation, material conditioning, mixing, filling and cure are selected for the individual wheel. Neither a broad wheel-size range nor a high listed flow establishes finished wheels per hour or a universal load rating.
Alcance de suministro definido
Metering equipment, tooling, hub preparation and handling must be sized together. Existing-casing filling is a separate route; the retained heavy-duty flow reference is not used here to select a replacement machine without its original specification.
Insumos para la selección del proceso
Wheel/hub drawing, heaviest and lightest shots, formulation, mold count, load/speed duty, work schedule and factory interfaces.
Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Metering equipment, tooling, hub preparation and handling must be sized together. Existing-casing filling is a separate route; the retained heavy-duty flow reference is not used here to select a replacement machine without its original specification.
Construction Equipment Solid PU Wheel Molding Workflow
Define the wheel and duty → Prepare the hub and mold → Meter, fill and cure → Finish and qualify. Define preparation, filling, cure and output timing separately for the selected configuration.
Define the wheel and duty
Confirm wheel geometry, hub, load, speed and service environment.
Prepare the hub and mold
Review bonding preparation, tooling and the selected formulation.
Meter, fill and cure
Establish actual shot mass, delivery time and material-specific cure.
Configuration References and Selection Conditions
Configuración existente y referencias de ensayo. Los ajustes del equipo, los resultados del material y los resultados del conjunto terminado son independientes; aplique cada valor solo a su configuración y condiciones documentadas.
| Elemento | Referencia / dato de selección | Condiciones |
|---|---|---|
| Aplicación | Specified worksite transport and construction wheels | Definir la rueda real y la carga de servicio. |
| Material | Selected cast PU formulation; brief hardness reference Shore A 80–92 | El procesamiento final del material y sus propiedades siguen la formulación seleccionada. |
| Referencia de densidad | Según la formulación | Cualquier intervalo numérico procede del brief de configuración suministrado, sujeto a ensayos de formulación. |
| Referencia de diámetro | 12–33 inches | Intervalo del brief de configuración; el utillaje y la geometría del buje se seleccionan por separado. |
| Referencia de caudal de dosificación | 300–2,000 kg/min | Configured heavy-duty injection-flow range; the operating point follows the selected project configuration. Flow is not finished wheels per hour. |
| Referencia de tiempo presentada | 6–9 min | Los puntos finales de tiempo originales requieren confirmación. Registrar el ciclo de entrada a desmoldeo por separado del intervalo de producción. |
| Carga, desgaste y resistencia química | Especificado para el conjunto de rueda real | No se afirma ninguna capacidad de carga universal, multiplicador comparativo de vida útil frente al desgaste ni resultado de resistencia química. |
Controles de proceso y verificaciones de aplicación
Evalúe estas funciones con el material, los moldes y el resumen de producción seleccionados. Los resultados de las piezas acabadas requieren su propia evidencia de aceptación.
Matched shot and flow
Calculate filling requirements from the actual wheel rather than selecting from the largest listed output.
Hub and mold interfaces
Coordinate preparation, positioning, mold population and demolding.
Wheel-duty evidence
Validate load, heat, wear and chemical exposure on the intended assembly.
Proyectos relacionados
Estas son referencias de aplicación relacionadas. Compare el material, el proceso y los módulos entregados reales; las cifras de proyecto reportadas no son resultados de aceptación para otra línea.

Proyecto de línea de ruedas macizas de PU para dúmperes de obra en Rusia

Proyecto de línea de neumáticos macizos de PU para minicargadoras en China
Preguntas frecuentes
Process selection, tooling, commissioning and line integration.
Can the listed flow be treated as finished wheel output?
How does the time reference relate to production rate?
¿Qué información se necesita para una configuración preliminar?
Discuss Your Tire and Wheel Production Project
Share the following with your production brief: Wheel/hub drawing, heaviest and lightest shots, formulation, mold count, load/speed duty, work schedule and factory interfaces. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.