Equipos para el procesamiento de cuero sintético
135 visualizaciones

Línea de impregnación de PU sin disolventes | Cuero de microfibra

Impregnación reactiva bicomponente y calandrado coordinado para sustratos de cuero sintético de microfibra.

Caudal de descarga

1.0 to 12.0 kg/min (Continuous double-sided delivery)

Relación de mezcla

100:80 to 100:120 (By weight)

Referencia de precisión

±0.2% (Continuous Coriolis mass flow tracking)

Presión de trabajo

0.5 to 0.8 MPa (Chemical lines and injection slots)

Disponibilidad a petición Plazo de entrega según cotización Garantía de 1 año
100% Solids Microfiber Nonwoven Saturation Technology

Deep Solvent-Free Impregnation for Luxury Suede-Feel Microfiber

Impregnación reactiva bicomponente y calandrado coordinado para sustratos de cuero sintético de microfibra.

Two-component reactive PU delivery and double-sided impregnation are coordinated with calendering for microfiber synthetic-leather substrates. Material conditioning, metering, mixing and roll interfaces are selected for the resin and web.

The listed 150 kN is total roll or nip force. Contact pressure and force per unit width require roll geometry and loading data. Substrate supply, curing, drying and finishing are separately defined.

Ilustración conceptual: Ilustración generada para el análisis del proceso; no es una fotografía de la máquina especificada, de las instalaciones de un cliente ni de un proyecto entregado.

Deep Solvent-Free Impregnation for Luxury Suede-Feel Microfiber

Flujo de material y principio de funcionamiento

Prepare Resin and Substrate

Condition the selected two-component PU system and position the intended microfiber web.

Meter and Impregnate

Coordinate mixing and the described double-sided delivery with substrate thickness and resin viscosity.

Calender the Web

Set the total nip force and roll arrangement for the actual width and contact conditions.

Curar y acabar

Follow the specified curing and finishing scope, then inspect impregnation and finished-material requirements.

¿Necesita una cotización de este equipo?

Solicitar presupuesto
Datos de configuración

Modelo y parámetros técnicos

Reference data describe the selected resin-delivery, impregnation and calendering configuration. Total nip force is distinct from pressure or line load. Penetration, tear strength and odor are evaluated on the selected substrate and finished material.

Parámetro técnicoHF-SFI160-DB
Componentes2 Components (A: Solvent-Free Polyol, B: Polymeric Isocyanate)
Rango de salida1.0 to 12.0 kg/min (Continuous double-sided delivery)
Rango de relación de mezcla100:80 to 100:120 (By weight)
Referencia de precisión±0.2% (Continuous Coriolis mass flow tracking)
Alimentación eléctrica380 V, trifásica, 50 Hz (opcional personalizada 440 V/480 V, 60 Hz)
Presión de trabajo0.5 to 0.8 MPa (Chemical lines and injection slots)
Capacidad de tanque/tolvaDay tanks: 2 x 200 L (Stainless steel with vacuum/heat jacket)
Peso11,500 kg (Impregnation coater and hydraulic calendering unit)
Dimensiones (L×An×Al)24,000 mm x 3,200 mm x 2,800 mm
Configuración del equipo

Características clave del equipo

Conditioned resin streams, metering/mixing, double-sided impregnation and calendering interfaces. Microfiber substrate, selected formulation, drying/curing and finishing scope are confirmed separately.

Configured Calendering Load

Coordinate roll geometry, total nip force and web width for the selected substrate and resin.

Double-Sided Resin Delivery

The described opposed delivery arrangement is reviewed for web thickness, resin viscosity and the required impregnation level.

Finished-Material Testing

Assess impregnation, tear behavior and appearance on representative finished material under the selected test method.

Formulation and Emission Review

A solvent-free formulation has its own handling, cleaning and curing requirements. Define odor and emissions checks for the actual materials and process.

Hablemos de la configuración de su equipo

Comparta su producto, materiales, utillaje y requisitos de producción para que podamos revisar el equipo y las interfaces para su proyecto.

Preguntas de planificación

Preguntas frecuentes

Does 150 kN specify nip pressure?
It specifies total force. Pressure and force per unit width require the roll geometry, contact conditions and loaded width.
How is impregnation of a dense microfiber web validated?
Trial the actual substrate, resin viscosity, temperature, delivery rate and calendering settings. Inspect penetration and finished material against the agreed criteria.
Does the line guarantee a strength advantage over leather?
A comparison requires defined substrates, thickness, conditioning and test methods. Resin delivery and calendering do not independently establish a fixed strength ratio.
Does solvent-free processing establish an automotive odor grade?
No. Evaluate representative finished material using the agreed odor test and conditioning. Formulation, substrate, cure and finishing all contribute.

¿Listo para hablar de su proyecto?

Contacte con nuestro equipo
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube