Equipos para el procesamiento de cuero sintético
135 visualizaciones

Máquina de recubrimiento de PU sin disolventes | Cuero sintético

Two-component solvent-free reaction coating with material degassing, dynamic mixing and reverse-roll application; water-borne modules use a separate process configuration.

Caudal de descarga

1.5 to 12.0 kg/min (Continuous adjustable)

Relación de mezcla

100:80 to 100:120 (By weight)

Referencia de precisión

±0.3% (Measured with closed-loop mass flow meters)

Feed Conditioning Reference

45–60°C material pre-conditioning

Disponibilidad a petición Plazo de entrega según cotización Garantía de 1 año
Eco-Friendly Synthetic Leather Manufacturing

Precision Reaction Coating for 100% Solids Solvent-Free Leather

Two-component solvent-free reaction coating with material degassing, dynamic mixing and reverse-roll application; water-borne modules use a separate process configuration.

The HF-SFL180-2K is described in the supplied equipment brief as a two-component solvent-free PU reaction coating and lamination system. Its vacuum-conditioning, dynamic-mixing and reverse-roll stages are configured for the chosen resin and substrate.

The specified web width, coating thickness and line speed are configuration references. Finished-leather VOC, odor, adhesion and durability performance require material-specific testing. A water-borne process uses a separate chemistry and drying configuration.

Ilustración conceptual — no es una fotografía del equipo entregado ni de una instalación de un cliente.

Precision Reaction Coating for 100% Solids Solvent-Free Leather

Flujo de material y principio de funcionamiento

Vacuum Degassing & Thermal Pre-Conditioning

Component A (Polyol) and Component B (Isocyanate prepolymer) undergo continuous thin-film vacuum degassing below 0.1 kPa to remove entrained air and are heated to 45–60°C to stabilize viscosities.

Synchronized Servo Metering

Deliver the reactive components using the described servo-driven pumps and mass-flow feedback. The listed ±0.3% ratio reference follows the agreed material, flow, calibration and measurement conditions; validate it at the selected coating operating point.

High-Shear Dynamic Mixing

Mix the components in the described water-jacketed dynamic chamber. The listed rotor range is 1,500–4,000 rpm; select speed and temperature for viscosity and reaction behavior, then validate mixing, residual air and thermal control at the coating operating point.

Micron-Precision Reverse Roll Coating

The mixed resin is metered between precision-ground chrome rollers and transferred onto release paper or base substrate at thicknesses between 0.05 and 0.30 mm, maintaining a cross-web profile variance of less than 2 µm.

Tension-Controlled Lamination & Thermal Curing

The coated film is bonded to the textile base via pneumatic nip rolls and transported through a short infrared/convection curing oven for accelerated crosslinking and final winding.

¿Necesita una cotización de este equipo?

Solicitar presupuesto
Datos de configuración

Modelo y parámetros técnicos

Valores de configuración procedentes del resumen de equipos facilitado. Los ajustes finales y la capacidad se confirman para el material y las condiciones del proyecto seleccionados.

Parámetro técnicoHF-SFL180-2K
Componentes2 Components (A: Polyol resin, B: Isocyanate curative)
Rango de salida1.5 to 12.0 kg/min (Continuous adjustable)
Rango de relación de mezcla100:80 to 100:120 (By weight)
Referencia de precisión±0.3% (Measured with closed-loop mass flow meters)
Alimentación eléctrica380 V, trifásica, 50 Hz (opcional personalizada 440 V/480 V, 60 Hz)
Presión de trabajo0.4 to 0.8 MPa (Metering lines and dynamic mixing head)
Capacidad de tanque/tolvaDay tanks: 2 x 120 L (Stainless steel with vacuum seals)
Peso6,500 kg (Main coating line skid)
Dimensiones (L×An×Al)18,000 mm x 3,200 mm x 2,600 mm
Working Web WidthUp to 1,600 mm (Substrate / Release paper); Finished Synthetic Leather
Coating Thickness Range0.05 to 0.30 mm (Continuous adjustable); Liquid Polyurethane Layer
Coating Line Speed5.0 to 25.0 m/min (Line-speed synchronized); Steady production run
Potencia total instalada45 kW (Excluding optional thermal oil boiler); Maximum operational load
Configuración del equipo

Características clave del equipo

The package covers two-component metering and mixing, a reverse-roll coating interface, material conditioning and controls for the solvent-free route. Water-borne mechanical foaming is a separate process module. Conveying and unwinding are optional; chemistry, release paper, water and power are agreed external interfaces.

Solvent-Free Reaction Coating

The selected reactive formulation avoids the conventional solvent carrier; finished-product VOC and odor results require testing.

Precision Reverse-Roll Application

The specified three-roll station controls wet-film thickness across the working web.

Material Degassing

Vacuum conditioning and dynamic mixing control entrained air for the selected resin viscosity.

Process-Specific Curing

The curing section is matched to the reactive coating; comparative energy use depends on the baseline and operating conditions.

Hablemos de la configuración de su equipo

Comparta su producto, materiales, utillaje y requisitos de producción para que podamos revisar el equipo y las interfaces para su proyecto.

Preguntas de planificación

Preguntas frecuentes

How does the machine prevent air entrapment in high-viscosity solvent-free resins?
It combines continuous thin-film vacuum degassing below 0.1 kPa with a high-shear micro-pin dynamic mixing head.
Can the coating thickness be maintained uniformly across wide web widths?
Yes, precision-ground chrome rollers and servo micro-gap drives maintain thickness tolerances within ±2 µm up to 1,600 mm.
What are the environmental advantages over traditional wet-process DMF lines?
The solvent-free route uses the selected reactive formulation; the water-borne route has separate chemistry and drying requirements. VOC, odor and finished-leather performance must be evaluated for the full material system and the customer test conditions. The supplied brief does not include original certification or test reports.
How does the system adapt to changes in production line speed?
Servo drives dynamically sync metering pump displacement to roller line speed, preventing coat weight variations during ramps.

¿Listo para hablar de su proyecto?

Contacte con nuestro equipo
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube