PU Elastomer Casting Machine | Auto Buffers
Low-pressure elastomer casting system for automotive buffer blocks, featuring independent modifier tank for resilience and hardness adjustability
Caudal de descarga
50–1200 g/s
Relación de mezcla
Polyether Polyol : Isocyanate = 100:40~90
Referencia de precisión de dosificación
≤±0,3 %
Control de temperatura
Tank A: 25~55°C; Tank B: 20~45°C
Descripción general del producto
Suitable for mass production of polyurethane buffer blocks for passenger vehicles and commercial vehicles, including suspension buffer pads, limit buffers, chassis anti-collision cushions, and rebound components.
This low-pressure PU elastomer casting machine is purpose-built for the mass production of automotive buffer blocks, including suspension buffer pads, limit buffers, chassis anti-collision cushions, and rebound components for passenger and commercial vehicles. The 2A2B two-component system includes an independent modifier tank for resilience adjustment, supporting flexible hardness control (35–65 Shore A) compatible with various vehicle types. Using solid/microcellular elastomer technology, the finished parts feature dense structure, shock absorption, compression resistance, wide temperature tolerance, and low compression set. The dedicated low-pressure elastomer process with gentle mixing prevents overheating, producing parts with the specified solid or microcellular structure; rebound is verified on the selected material and stable performance without cracking or deformation in long-term use. Precise temperature and dosing control ensure minimal hardness and density deviation between batches, meeting high-precision automotive requirements.

Flujo de trabajo operativo
Raw Material & Modifier Preparation
Prepare polyether polyol (Tank A) and isocyanate (Tank B) at the target mix ratio (100:40-90); select the resilience modifier and load it into the independent tank based on target hardness (35-65 Shore A).
Carga de tanques y ajuste de temperatura
Load polyol into Tank A and isocyanate into Tank B; set Tank A to 25-55°C and Tank B to 20-45°C, and preheat the mold with the external mold heater to 40-80°C.
Metering, Mixing & Low-Pressure Casting
The PLC dosing system dispenses precisely; the mixing head runs at 1500-3500 r/min for gentle low-pressure mixing, with dosing rate 50-1200 g/s, shot weight 50-500 g/mold, at 0.3-1.5 MPa.
Curado y desmoldeo
Allow the buffer block to cure in the mold at controlled temperature, with a typical cycle time of 90-150 seconds per mold; after curing, demold the finished buffer block.
¿Necesita una cotización de este equipo?
Solicitar presupuestoEspecificaciones técnicas
The listed 50–1,200 g/s is a configuration-family dispensing reference. Pump selection, individual component output, minimum stable shot and combined delivery are specified for the quoted configuration. Solid and microcellular elastomer results require separate material and finished-part tests.
| Parámetro técnico | HF-LPUE-2A2B-Auto-Buffer |
|---|---|
| Dosing Rate | 50~1200 g/s |
| Shot Weight Per Mold | 50~500 g/mold |
| Relación de mezcla | Polyether Polyol : Isocyanate = 100:40~90 |
| Capacidad del depósito | 200L / 250L (optional, per tank) |
| Velocidad del cabezal mezclador | 1500~3500 r/min |
| Precisión de dosificación | ≤±0,3 % |
| Tank System | 2A2B two-component system + independent modifier tank for resilience |
| Control de temperatura | Tank A: 25~55℃; Tank B: 20~45℃ |
| Mold Temperature Control | 40~80℃ (external mold heater) |
| Casting Pressure | 0.3~1.5 MPa |
| Cycle Time | 90~150 sec/mold |
| Sistema de limpieza | Pneumatic liquid cleaning + automatic air purge |
| Potencia | 5.5~12 kW |
| Sistema de control | PLC touch control + formula storage |
| Sistema de aplicación | Two-component polyurethane elastomer (CPU) / microcellular elastomer system |
| Garantía | 1 año |
| Certificación | Confirme los documentos aplicables para la configuración cotizada |
Características y ventajas clave
Engineered for precision, consistency, and efficiency in automotive buffer block mass production.
Dedicated Low-Pressure Elastomer Process
Gentle mixing prevents overheating, producing parts with the specified solid or microcellular structure; rebound is verified on the selected material. Performance remains stable without cracking or deformation in long-term use.
Independent Modifier Tank for Hardness Adjustment
Supports adjustable hardness from 35~65 Shore A, compatible with buffer blocks for various vehicle types from passenger cars to commercial vehicles.
Precise Temperature & Dosing Control
Ensures minimal deviation in hardness and density between batches, meeting the high-precision requirements of automotive OEM production.
Solid/Microcellular Elastomer Technology
Finished parts feature dense structure, shock absorption, compression resistance, wide temperature tolerance, and low compression set for reliable automotive applications.
Low Power Consumption & Easy Maintenance
Designed for energy efficiency and simple maintenance, supporting 24-hour continuous operation for standardized automotive production lines.
Intelligent PLC Touch Control with Formula Storage
PLC touch control interface with formula storage simplifies operation, reduces manual errors, and enables rapid changeovers between different buffer block specifications.
Hablemos de la configuración de su equipo
Comparta su producto, materiales, utillaje y requisitos de producción para que podamos revisar el equipo y las interfaces para su proyecto.
See It in Action
Explorar otros equipos
Explore otros equipos en nuestro catálogo. Estos listados tienen fines de descubrimiento de productos; la compatibilidad y el alcance de la línea de producción se confirman por separado según sus requisitos de material, proceso y producción.
Preguntas frecuentes
What automotive buffer applications is this machine designed for?
What is the advantage of the low-pressure elastomer process?
Can I adjust the hardness of the buffer blocks?
How precise is the dosing and temperature control?
What is the typical production cycle time?
What certifications does this equipment hold for automotive production?
¿Listo para hablar de su proyecto?
Contacte con nuestro equipo