Automated PU Shoe Sole Production Solution Banner background
حلول أحذية البولي يوريثان

حل إنتاج نعل الحذاء المصنوع من البولي يوريثان بطريقة آلية

Produce separate PU soles for later footwear assembly using a selected low-pressure metering and mixing unit, sole molds and handling arrangement. Plan manual or automated pouring, cure residence and finishing around the sole design, material system and batch mix.

نطاق التطبيق والإنتاج

Plan Independent PU Sole Molding and Automation

Produce separate PU soles for later footwear assembly using a selected low-pressure metering and mixing unit, sole molds and handling arrangement. Plan manual or automated pouring, cure residence and finishing around the sole design, material system and batch mix.

Independent Soles and Layer Options

This route molds a separate sole component. Single-density, layered and multicolor designs require their own material circuits, tooling and molding sequence; density, color and component count are specified separately.

Flexible Production and Finishing

Compare manual handling and configured conveyor or rotary arrangements against order sizes, mold changes and cure time. Semi-automatic edge trimming is a selectable finishing task, not a complete automatic demolding system.

The line proposal defines the selected materials, equipment, tooling, automation and acceptance responsibilities. Equipment ratings and reported project results apply to their stated configurations and conditions. Choose the tasks to automate from the independent-sole production schedule. List mold loading, pouring, mold movement, demolding, transfer and trimming separately, then assign each task to an operator or a specified device. Balance the selected arrangement using actual cure residence, cavity population and style changes.

سير عمل التصنيع

Independent PU Sole Molding Workflow

استخدم المنتج والمواد والتجهيزات القالبية المختارة لتحديد تسلسل التشغيل. يُحدَّد التشغيل التجريبي والتدريب ومراحل المشروع بشكل منفصل في خطة التسليم.

01

Prepare the PU Components

Condition the selected polyol and isocyanate system and any color feeds for the agreed sole formulation.

MATERIAL COMPATIBILITY AND FEED CONDITIONS
02

Set Up Sole Tooling

Prepare the sole mold, release method, venting and temperature control. Confirm any inserts and layered-sole sequence.

SOLE MOLD AND FILLING ARRANGEMENT
03

Meter and Pour

Match component ratio, mixed shot weight and dispensing time to the sole cavity. Select manual or configured automatic pouring.

SHOT WEIGHT, RATIO AND POURING TASK
التهيئة والقبول

تهيئة الخط والظروف الهندسية

حدِّد المنتج الفعلي ونطاق التوريد والواجهات وأساس التحقق قبل وضع أهداف الإنتاج أو متطلبات الخدمة في الموقع.

بند التخطيطأساس التهيئة والقبول
مسار المنتجIndependent PU sole components for subsequent footwear assembly. Direct injection onto a prepared upper requires a different tooling and handling arrangement.
Core metering optionSelect the sole or general footwear low-pressure unit against material viscosity, ratio, shot demand and mold interfaces. The two equipment pages are selection options, not two mandatory main machines.
Mold and layer designDefine sole geometry, release and venting, inserts and the required single- or multilayer sequence. Confirm each layer against the actual material circuit.
Colors and densitiesSpecify color, density and raw-material component requirements independently. Use trials to establish layer timing, cleaning and acceptable changeovers.
Handling and automationDefine any conveyor, rotary, pouring robot or mold-handling scope by its actual tasks and interfaces. Practical output follows the complete operating schedule.
Small batches and finishingReview mold changes, order mix and a selected semi-automatic edge-trimming option. Record manual tasks rather than assuming a fully automatic finishing line.
Layout and utilitiesConfirm the installed equipment, mold circulation, maintenance access and site electrical, air and thermal-service requirements before setting the line layout.
Acceptance and supportAgree equipment checks, trial materials, tooling, conforming output definitions and finished-sole tests. Define commissioning and training milestones for the ordered scope.

أدوار المعدات وواجهات التوريد

خيار المعداتالدور والنطاق
آلة تشكيل رغوة PU منخفضة الضغط | نعال الأحذيةمراجعة المعدات. Core low-pressure metering and mixing option for independent sole molding.
ماكينة رغوة PU منخفضة الضغط | إنتاج الأحذيةمراجعة المعدات. Alternative footwear metering configuration; compare it against the selected material and line interfaces rather than treating it as a second mandatory main unit.
قالب صب النعال PU | الأحذيةمراجعة المعدات. Sole pouring mold option. Confirm cavity, material, venting, release and attachment details for the selected machine.
آلة تشذيب حواف نعال الأحذية شبه الآلية | الإنتاج بكميات صغيرةمراجعة المعدات. Optional semi-automatic edge finishing for compatible sole material and geometry. Operator work and demolding are specified separately.

تخطيط الأحذية المرتبط

تخطيط مصنع الأحذية | قولبة نعل PU الداخلي | إنتاج أحذية السلامة من البولي يوريثان

تتبع التقييمات النهائية والتخطيط والمرافق وشروط القبول التكوين المختار والاتفاقية الفنية.
خيارات المعدات المطابقة

Equipment for Independent PU Sole Production

Select the sole metering unit or the alternative footwear metering configuration for the required duty, then confirm the pouring mold interfaces. The semi-automatic edge trimmer is an optional finishing step with defined operator work, separate from demolding or robotic handling.

اعتبارات هندسية

اعتبارات التكوين والهندسة

اختر العملية والمعدات بناءً على المنتج الفعلي ونطاق الإنتاج المتفق عليه.

Metering for the Selected Sole

Match material preparation, ratio and shot delivery to the actual formulation and mold.

Defined Layer and Color Routes

Specify the material circuits and molding sequence for each layer or color configuration.

Flexible Batch Planning

Coordinate tooling changes, cleaning, cure residence and the intended order mix.

Selected Finishing Tasks

Include compatible trimming and handling options with explicit operator and equipment responsibilities.

مرجع تطبيقي مرتبط

سجل مشروع مرتبط

The Rwanda upgrade documents an independent-sole application. Review the supplied metering and pouring functions and the actual remaining operator tasks before using it as an automation reference. Its reported output applies to that project and trial basis.

عرض سجلات المشروع
تخطيط الإنتاج

الأسئلة الشائعة حول تخطيط الإنتاج

وضّح مسار المواد والتجهيزات القالبية ونطاق المعدات ومتطلبات التحقق الخاصة بمنتجك.

How does independent sole molding differ from direct injection footwear? +
Independent molding produces a sole for later assembly. Direct injection forms a sole against a prepared upper and requires matching lasts, molds and upper-handling arrangements. Define the intended route before selecting the line.
Does dual density mean two colors or two raw-material components? +
These are separate requirements. Describe the sole layers, density targets, colors and material formulations independently so the required feed circuits and molding sequence can be selected.
Can the line handle small orders and frequent mold changes? +
Review the smallest stable shot, available molds, batch sizes and cleaning requirements. A manual or partly automated arrangement may be considered alongside a continuous handling line for the intended order mix.
Does the edge-trimming option include automatic demolding? +
No. The linked semi-automatic trimmer is a selected finishing machine. Demolding, loading and any robotic handling are separate tasks that must appear in the supply list.
How are capacity and product acceptance established? +
Use the intended sole, material, cavity population, shift duration and complete task schedule. Agree conforming-output measurement and finished-sole tests separately from individual machine ratings.
What should I send for a sole-line proposal? +
Sole drawings or samples, material data, layer and color requirements, shot weight, usable mold cavities, order mix, changeover frequency, shift schedule and the tasks proposed for automation. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.
Which tasks should be automated first on an existing sole line? +
Record the current task times and constraints for loading, pouring, curing, removal and finishing. Compare the proposed automation with retained molds, handling and operator access. The linked semi-automatic edge trimmer addresses finishing; its selection does not establish automatic loading, transfer or demolding.

Discuss Your PU Sole Line

Share the following for this application: Sole drawings or samples, material data, layer and color requirements, shot weight, usable mold cavities, order mix, changeover frequency, shift schedule and the tasks proposed for automation. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

اتصل بنا

لمعرفة كيفية تعاملنا مع معلومات استفسارك، اقرأ سياسة الخصوصية.

تأكيد جدول الاستجابة عند الطلب عرض سعر دون التزام اتفاقية عدم إفصاح متاحة
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube