مشروع خط إنتاج البولي يوريثان المتكامل الجلد لمساند ذراعي كرسي المكتب في الصين

حدّثت Haifeng خطًا لمساند أذرع PU ذات جلد متكامل في الصين، مما رفع الطاقة الإنتاجية بنسبة 40% بدقة قياس صلادة Shore A 65 (±2) ودورات سريعة مدتها 90 ثانية.

نظرة عامة على المشروع

تنبيه بشأن الرسم التوضيحي. الرسوم التوضيحية للعملية ليست صورًا فوتوغرافية موثّقة لهذا التجهيز.

أساس مرجعية المشروع. الأرقام وتفاصيل التكوين مُبلَّغ عنها في موجز المشروع المقدَّم. وهي قيم مرجعية للتطبيق المذكور، وليست نتائج قبول موثّقة ولا ضمانًا لتجهيز آخر. يجب التحقق من السجلات المصدرية والمواد والتجهيزات القالبية وجدول التشغيل وطريقة الاختبار عند تقييم مشروع مماثل.

Haifeng successfully upgraded and commissioned an automated integral skin polyurethane armrest production line for a premier high-end ergonomic office furniture manufacturer in China, boosting daily production throughput by 40% while maintaining tight Shore A 65 (±2) hardness precision. The upgrade replaced obsolete low-pressure machinery with a precision high-pressure dual-component dosing machine, dynamic mold temperature control skids, and automated pneumatic clamping fixtures.

Prior to upgrading, the manufacturer experienced high scrap rates exceeding 9% on multi-directional 3D/4D armrest pads. Legacy low-pressure casting heads required continuous solvent flushing, created toxic waste, and caused uneven material flow that starved the thin leading edges of the armrest. The client required an advanced high-pressure dispensing solution capable of stoichiometric ratio locking, solvent-free self-cleaning needle shut-off, and rapid 90-second demolding cadence across four-cavity aluminum tools.

Operating since March 2024 on a two-shift daily schedule across a 220 m² footprint, the upgraded workcell produces over 3,000 armrest pads per day. By deploying Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement heads, the client reliably manufactures luxury, tactile, scratch-resistant armrest pads that comply with strict international office seating standards.

مصفوفة المواصفات الفنية للمشروع:

وحدة الحلالألواح / الأجزاء النموذجيةمادة القلبالعملية الرئيسيةوضع الإنتاج النموذجي
رغوة الأثاث والراحةOffice Chair 3D/4D ArmrestsIntegral Skin PU (Shore A 60–70)حقن التفاعل داخل القالبMulti-Station Tilting Clamps

تنفيذ الحلول

Haifeng deployed a high-speed reaction injection upgrade optimized for intricate multi-cavity armrest tooling:

1. High-Pressure Impingement Dispensing: High-precision axial piston pumps deliver chemicals at 180 bar, achieving molecular mixing without solvent cleaning cycles.
2. Four-Cavity Synchronized Clamping: Upgraded pneumatic mold clamps hold multi-cavity aluminum tooling firmly against expansion pressure, equipped with quick-change magnetic insert locators.
3. Dynamic Mold Temperature Balancing: Closed-loop TCU units regulate mold cavity temperatures within ±0.5°C, ensuring identical skin thickness from the first shot to the last.
4. Rapid-Cycling Mechanical Shut-Off: An L-shaped self-cleaning mixing head executes sharp 0.3-second needle cut-offs, preventing chemical drool and surface blemishes.

Installation and commissioning: 14 days. Operator training: 3 days. Warranty: 1 year. Long-term spare parts and remote PLC diagnostic support are available.

المعداتالطرازالكميةالوظيفة
High-Pressure Armrest Dosing MachineHF-HP-SKIN30وحدة واحدةقياس الجرعات بنسبة متكافئة كيميائياً، وحقن بالاندفاع عالي السرعة، والتحكم في القذف
نظام TCU ديناميكي ثنائي الدائرةHF-TCU-36وحدتانPrecision dynamic fluid and mold thermal balancing for multi-cavity tooling
Four-Cavity Pneumatic Mold ClampsHF-CLAMP-4C4 مجموعاتHigh-speed pneumatic mold opening, locking, and 30° venting angle tilting
خزانة التحكم الرئيسية بأتمتة PLCHF-PLC-COMPACTمجموعة واحدةSpeed synchronization, recipe storage, and shot weight telemetry tracking

نتائج المشروع

40%
Capacity Increase
Daily finished armrest pad output increase achieved following high-pressure upgrade. Baseline: Legacy low-pressure casting baseline. Measurement conditions: Consecutive 30-day post-upgrade production audit.
Shore A 65 (±2)
Surface Hardness Precision
Tight tactile durometer tolerance maintained across all four tooling cavities. Baseline: ±7 Shore A variation on legacy equipment. Measurement conditions: Durometer batch testing across 1,000 armrest pads.
90 ثانية
إيقاع دورة إزالة القالب
Total injection, reaction, and part ejection cycle achieved per four-cavity mold. Baseline: 180 s on legacy low-pressure machinery. Measurement conditions: Timed multi-shift continuous production runs.

ابدأ مشروعًا مماثلًا

شاركنا تطبيقك ونظام المواد لديك والطاقة الإنتاجية المستهدفة وظروف المصنع. سيرد فريقنا خلال يوم عمل واحد. وبمجرد أن تتضح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube