مشروع خط HP-RTM لنوابض ورقية مركّبة للخدمة الشاقة في الصين

شغّلت Haifeng خط HP-RTM آليًا لنوابض ورقية مركبة، مما خفّض وزن نظام التعليق بنسبة 65% واجتاز مليون دورة إجهاد ديناميكي.

نظرة عامة على المشروع

تنبيه بشأن الرسم التوضيحي. الرسوم التوضيحية للعملية ليست صورًا فوتوغرافية موثّقة لهذا التجهيز.

أساس مرجعية المشروع. الأرقام وتفاصيل التكوين مُبلَّغ عنها في موجز المشروع المقدَّم. وهي قيم مرجعية للتطبيق المذكور، وليست نتائج قبول موثّقة ولا ضمانًا لتجهيز آخر. يجب التحقق من السجلات المصدرية والمواد والتجهيزات القالبية وجدول التشغيل وطريقة الاختبار عند تقييم مشروع مماثل.

Haifeng successfully engineered and commissioned an automated High-Pressure Resin Transfer Molding (HP-RTM) production line for a major Chinese commercial vehicle suspension manufacturer, reducing suspension leaf spring tare weight by 65% while delivering over 1 million cycles of fatigue endurance. The project encompassed the turnkey delivery of specialized high-pressure resin dosing machines, multi-stage vacuum extraction units, dynamic mold thermal conditioning skids, and digital interface coordination for the customer's heavy hydraulic press.

Prior to commissioning, the manufacturer assembled suspension assemblies using conventional heavy multi-leaf steel springs. Heavy steel assemblies imposed severe unsprung weight penalties on commercial fleets, degraded ride comfort, and suffered from corrosion-induced fatigue failures. The client required an industrial-scale manufacturing system capable of injecting low-viscosity thermoset resins into ultra-thick (up to 40mm), densely packed unidirectional glass fiber preforms under extreme pressure, eliminating dry-spot delamination and compressing demold cycles down to 5 minutes.

Operational since June 2026 on a continuous two-shift production schedule across a 280 m² footprint, the workcell delivers consistent component repeatability. By implementing Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement injection heads, the client consistently manufactures rugged, corrosion-free composite leaf springs complying with rigorous commercial vehicle chassis durability standards.

التخطيط لخط إنتاج ذي صلة

Use this record as an application-specific reference. Reinforcement introduction, resin chemistry, tooling, consolidation and qualification differ between RIM, LFI, SMC and HP-RTM. A result from one process does not establish performance of another.

موجز الإنتاج للمناقشة التقنية

قدّم رسمًا أو عينة للمنتج النهائي، وبيانات المواد، والطاقة الإنتاجية المستهدفة، واحتياجات الأتمتة، وظروف المصنع. ستراجع Haifeng العملية وواجهات المعدات وخطة القبول وفقًا لأهداف الإنتاج الخاصة بكم.

رسم توضيحي تصوري — وليس صورة لمعدات مُسلَّمة أو لتركيب لدى عميل.

The 65% weight reduction and over one million fatigue cycles are results for this project’s spring configuration and conventional multi-leaf steel comparison. Fatigue observations refer to the recorded dynamic bench tests; load-deflection, environment and acceptance conditions are specific to the component program. These results do not guarantee the same outcome for a different spring or constitute injection-machine ratings.

تنفيذ الحلول

Haifeng deployed an extreme-pressure HP-RTM dosing platform engineered for thick-section composite preforms, coordinating impregnation and cure within the project’s reported 5-minute complete molding cycle:
1. Extreme-Pressure Stoichiometric Ratio Lock: Heavy-duty axial displacement pumps meter resin components under extreme pressure with ±0.5% stoichiometric accuracy, driving resin deep into 40mm-thick fiber stacks.
2. Deep Vacuum Evacuation Skid: High-flow vacuum pumps pull tool cavity air down to <10 mbar before injection begins, supporting air-entrapment control; actual internal defects require component inspection.
3. Multi-Zone Thermal Stability: Dynamic TCU loops maintain upper and lower mold platen temperatures within ±0.8°C, preventing thermal exotherm runaway while accelerating core cure.
4. Self-Cleaning High-Pressure Injection Head: An industrial impingement mixing head executes instantaneous 0.3-second mechanical clean cut-offs without chemical solvent flushes, maximizing continuous uptime.

المعداتالطرازالكميةالوظيفة
Extreme-Pressure HP-RTM Dosing MachineHF-RTM-HP150وحدة واحدةStoichiometric ratio metering and extreme-pressure resin injection for thick preforms
Multi-Stage Deep Vacuum SkidHF-VAC-RTMمجموعة واحدةHigh-vacuum mold evacuation and cavity pressure telemetry monitoring
Dual-Circuit Dynamic Mold Temperature ControllerHF-TCU-48وحدتانPrecision dynamic oil/water thermal balancing for high-temperature composite tooling
خزانة PLC صناعية متكاملةHF-PLC-COMPACTمجموعة واحدةComplete process sequence control, real-time telemetry, and press safety interlocks

نتائج المشروع

65%
تقليل الوزن
Suspension leaf spring weight saved compared to conventional multi-leaf steel assemblies; applies to this project spring configuration and stated baseline, not total vehicle weight.
1,000,000+
Dynamic Fatigue Cycles
Zero inter-laminar delamination or fatigue failure observed during dynamic bench testing; this is the recorded project bench-test observation, not a universal fatigue or zero-defect guarantee for all designs.
5 min
زمن دورة نزع القالب
Total cycle duration per composite leaf spring from preform loading to demolded part

أرسل أهداف إنتاجك

شاركنا تطبيقك ونظام المواد لديك والطاقة الإنتاجية المستهدفة وظروف المصنع. سيرد فريقنا خلال يوم عمل واحد. وبمجرد أن تتضح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube