Проект линии HP-RTM для тяжелонагруженных композитных рессор в Китае
Haifeng ввела в эксплуатацию автоматизированную линию HP-RTM для композитных рессор, снизив массу подвески на 65% и пройдя 1 млн циклов динамической усталостной нагрузки.
Обзор проекта
Примечание об иллюстрации. Иллюстрации процесса не являются проверенными фотографиями данной установки.
Основание проекта как референса. Цифры и сведения о конфигурации приведены в предоставленном описании проекта. Это справочные значения для указанного применения, а не подтверждённые результаты приёмки или гарантия для другой установки. При оценке аналогичного проекта проверяйте исходные записи, материал, оснастку, режим работы и метод испытаний.
Haifeng successfully engineered and commissioned an automated High-Pressure Resin Transfer Molding (HP-RTM) production line for a major Chinese commercial vehicle suspension manufacturer, reducing suspension leaf spring tare weight by 65% while delivering over 1 million cycles of fatigue endurance. The project encompassed the turnkey delivery of specialized high-pressure resin dosing machines, multi-stage vacuum extraction units, dynamic mold thermal conditioning skids, and digital interface coordination for the customer's heavy hydraulic press.
Prior to commissioning, the manufacturer assembled suspension assemblies using conventional heavy multi-leaf steel springs. Heavy steel assemblies imposed severe unsprung weight penalties on commercial fleets, degraded ride comfort, and suffered from corrosion-induced fatigue failures. The client required an industrial-scale manufacturing system capable of injecting low-viscosity thermoset resins into ultra-thick (up to 40mm), densely packed unidirectional glass fiber preforms under extreme pressure, eliminating dry-spot delamination and compressing demold cycles down to 5 minutes.
Operational since June 2026 on a continuous two-shift production schedule across a 280 m² footprint, the workcell delivers consistent component repeatability. By implementing Haifeng's closed-loop Ratio Lock flow algorithms and high-velocity impingement injection heads, the client consistently manufactures rugged, corrosion-free composite leaf springs complying with rigorous commercial vehicle chassis durability standards.
Планирование смежной производственной линии
Use this record as an application-specific reference. Reinforcement introduction, resin chemistry, tooling, consolidation and qualification differ between RIM, LFI, SMC and HP-RTM. A result from one process does not establish performance of another.
Производственное задание для технического обсуждения
Предоставьте чертёж или образец готового изделия, данные о материалах, целевой объём выпуска, требования к автоматизации и условия на заводе. Haifeng рассмотрит технологический процесс, интерфейсы оборудования и план приёмки применительно к вашим собственным производственным целям.
Концептуальная иллюстрация — не фотография поставленного оборудования или установки у заказчика.
The 65% weight reduction and over one million fatigue cycles are results for this project’s spring configuration and conventional multi-leaf steel comparison. Fatigue observations refer to the recorded dynamic bench tests; load-deflection, environment and acceptance conditions are specific to the component program. These results do not guarantee the same outcome for a different spring or constitute injection-machine ratings.
Реализация решений
Haifeng deployed an extreme-pressure HP-RTM dosing platform engineered for thick-section composite preforms, coordinating impregnation and cure within the project’s reported 5-minute complete molding cycle:
1. Extreme-Pressure Stoichiometric Ratio Lock: Heavy-duty axial displacement pumps meter resin components under extreme pressure with ±0.5% stoichiometric accuracy, driving resin deep into 40mm-thick fiber stacks.
2. Deep Vacuum Evacuation Skid: High-flow vacuum pumps pull tool cavity air down to <10 mbar before injection begins, supporting air-entrapment control; actual internal defects require component inspection.
3. Multi-Zone Thermal Stability: Dynamic TCU loops maintain upper and lower mold platen temperatures within ±0.8°C, preventing thermal exotherm runaway while accelerating core cure.
4. Self-Cleaning High-Pressure Injection Head: An industrial impingement mixing head executes instantaneous 0.3-second mechanical clean cut-offs without chemical solvent flushes, maximizing continuous uptime.
| Оборудование | Модель | Кол-во | Функция |
|---|---|---|---|
| Extreme-Pressure HP-RTM Dosing Machine | HF-RTM-HP150 | 1 шт. | Stoichiometric ratio metering and extreme-pressure resin injection for thick preforms |
| Multi-Stage Deep Vacuum Skid | HF-VAC-RTM | 1 комплект | High-vacuum mold evacuation and cavity pressure telemetry monitoring |
| Dual-Circuit Dynamic Mold Temperature Controller | HF-TCU-48 | 2 шт. | Precision dynamic oil/water thermal balancing for high-temperature composite tooling |
| Встроенный промышленный шкаф ПЛК | HF-PLC-COMPACT | 1 комплект | Complete process sequence control, real-time telemetry, and press safety interlocks |
Связанные семейства оборудования
Ссылки на каталог описывают связанные семейства оборудования. Поставленная модель, вспомогательное оборудование и условия приемки определяются конфигурацией проекта.
Результаты проекта
Опишите свои производственные задачи
Расскажите о вашей задаче, системе материалов, целевом объёме выпуска и условиях на производстве. Наша команда ответит в течение одного рабочего дня. После уточнения требований мы в течение двух рабочих дней предоставим предварительное предложение.
