Supplied reference image of a rotary rubber footwear injection machine
معدات حقن وتشكيل الأحذية
122 Views

آلة حقن المطاط الدوارة | نعال الأحذية

راجع آلة Haifeng HF116 الدوارة لنعال المطاط، بـ 24 أو 30 محطة، وقدرة تلدين بلاستيكي 26 سم³/ثانية، ومتطلبات التجيهزات القالبية الخاصة بكل مركّب.

خيارات المحطات

24 أو 30

حجم إطار القالب

200 × 400 mm / 200 × 430 mm; confirm the applicable configuration

Rubber Plasticizing Rate

26 cm³/s; a volumetric rate, not shot volume

Pressure / Flow Control

Proportional hydraulic control

التوافر عند الطلب جدول التسليم حسب عرض السعر ضمان لمدة سنة واحدة
التطبيق والتكوين

نظرة عامة على المنتج والاختيار

راجع التطبيق أو المادة أو قطعة العمل وواجهات التجهيزات القالبية ونطاق المعدات المختارة قبل اختيار التكوين.

The HF116/RU-RU rotary machine processes rubber compound for footwear soles. Listed alternatives include 24 or 30 stations, two mold frame sizes and a plasticizing capacity of 26 cm³/s. That capacity is a rate, not the available shot volume or finished-pair output.

Select the compound, shot requirement, mold cavities, venting and vulcanization schedule together. Station count follows curing residence, indexing, loading and unloading duties. Similar external mold dimensions alone do not establish compatibility.

Optional robotic tasks and their interfaces are separately specified. Slip resistance, heat resistance and other finished-sole properties depend on the actual compound, design and tests. Supply a sole sample or drawing and the production schedule for review.

سير عمل الإنتاج

Prepare Compound and Molds

Review the rubber compound, required shot, mold cavities, venting and clamping interfaces.

Plasticize and Inject Rubber

Set the rubber plasticizing and injection duties for the selected compound and sole geometry.

Coordinate Vulcanization and Indexing

Match the compound-specific cure, rotary residence, indexing and operator tasks.

Demold and Check the Sole

Inspect the molded sole and define any finishing, material and finished-product tests required for the application.

هل تحتاج إلى عرض سعر لمعدات تصنيع الأحذية؟

اطلب عرض سعر
مراجع التكوين

المواصفات الفنية

The two mold frame sizes are alternatives; their relationship to station count is not established. Clamping force and screw dimensions require technical confirmation.

المعلمة الفنيةHF116/RU-RU
Station options24 أو 30
أبعاد إطار القالب200 × 400 mm / 200 × 430 mm; confirm the applicable configuration
Rubber plasticizing capacity26 cm³/s; a volumetric rate, not shot volume
وظائف المعدات

وظائف المعدات وتكوينها

يُختار كل من الوظائف والخيارات وفق المواد والتجهيزات القالبية والمهام المشمولة في الطلب.

خيارات المحطة الدوارة

Rotary station configurations: compare 24 and 30 stations against vulcanization, indexing and operating times.

Injection stroke measurement

Injection stroke measurement: monitor injection movement and assess metering repeatability through consecutive trial shots.

Proportional hydraulics

Proportional hydraulics: review pressure and flow adjustment ranges for the intended compound and mold.

PID temperature control

PID temperature control: define the temperature range and control accuracy in the technical configuration.

Optional robotic integration

Optional robotic integration: roughing and release-agent spraying require a stated scope for robots, tooling and programs.

هل تحتاج إلى مساعدة في اختيار تكوين معداتك؟

شارك منتجك وموادك وتجيهزاتك القالبية وهدف الإنتاج. يتم الاتفاق على نطاق المعدات ومتطلبات التشغيل لكل مشروع.

مقارنة المسارات والمعدات

قارن مسارات المعدات هذه حسب المادة وبنية النعل ونطاق التكامل. البدائل المدرجة ليست قابلة للتبديل دون مراجعة التجيهزات القالبية والعملية.

أسئلة التكوين

الأسئلة الشائعة حول اختيار المعدات

Does 26 cm³/s mean a 26 cm³ shot?
No. The unit cm³/s describes volume per second, so the listed plasticizing capacity is a rate. It does not state the injection volume available in one shot. Confirm the required shot volume and processing cycle separately for the target sole and compound.
كيف ينبغي مقارنة 24 و30 محطة؟
Use the required vulcanization time and the operating sequence as the comparison basis. Add indexing time, output per mold and available floor space. A higher station count does not by itself establish a higher finished-product output when other process times remain undefined.
Can existing molds be reused?
Check the frame dimensions, cavity count, interfaces and venting against the proposed machine configuration. Similar outer dimensions alone do not establish compatibility. Confirm the required clamping arrangement and mold movements before planning a transfer.
Can the machine guarantee slip-resistant or heat-resistant soles?
Finished-product performance requires testing of the actual sole. The equipment designation does not establish those results. Define the intended compound, tread design and applicable performance targets in the trial plan. Submit the sole sample and testing requirements so they can be included in the acceptance scope.
ماذا يحدث بعد أن أرسل متطلبات المشروع؟
أرسلوا رسم المنتج أو العينة، وبيانات المواد، والإنتاج المستهدف، والمساحة المتاحة للتركيب. سيرد فريقنا خلال يوم عمل واحد. وبمجرد أن تتضح المتطلبات، نقدّم عرضًا أوليًا خلال يومَي عمل. تواصلوا مع فريقنا لمناقشة التكوين ونطاق التجربة.

هل أنت مستعد لمناقشة مشروعك؟

تواصل مع فريقنا
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube