آلات صب مطاط البولي يوريثان المرن
170 مشاهدة

ماكينة صب الإيلاستومر البولي يوريثاني | موانع التسرب

Precision casting system for industrial polyurethane seals, supporting MOCA/BDO dual formulas with small-flow precise metering

معدل تدفق التصريف

20–500 g/s

نسب خلط المواد

MOCA: 100:8~13; BDO: 100:3~6

مرجع دقة قياس الجرعات

≤±0.3% (النطاق الكامل)

التحكم في درجة الحرارة

الخزان A: 30~80°C؛ الخزان B: MOCA (90~115°C)/BDO (25~50°C)

التوافر عند الطلب جدول التسليم حسب عرض السعر ضمان لمدة سنة واحدة
PU Elastomer Casting Machine for Polyurethane Seals

نظرة عامة على المنتج

Specially designed for large-scale production of industrial polyurethane seals, widely suitable for casting of general seals in industrial equipment, hydraulic systems, construction machinery.

This PU casting unit is intended for industrial polyurethane seals. The listed 1A1B system provides independent temperature control, with MOCA or BDO processing selected using the matching material-feed and cleaning configuration. Metering controls and the configured small-flow range support filling of small seal molds. Vacuum preparation supports gas reduction in the feed. Seal dimensions, oil or hydrolysis resistance, leakage performance and service life depend on the formulation, tooling, cure, finishing and application conditions and require representative-product tests.

نظرة عامة على المنتج

مُهيَّأ

وفقًا لمواصفات إنتاجك

سير العمل التشغيلي

تحضير المواد الخام

Prepare CPU prepolymer and chain extender (MOCA or BDO) at the target mix ratio (MOCA: 100:8-13; BDO: 100:3-6), selecting the formula for seal application needs (static/dynamic, oil resistance).

تعبئة الخزانات وضبط درجة الحرارة بشكل مستقل

Load prepolymer into Tank A and chain extender into Tank B; the 1A1B independent temperature control sets Tank A at 30-80°C and Tank B per formula (MOCA: 90-115°C; BDO: 25-50°C).

إزالة الرغوة بالتفريغ

Prepare and degas the selected liquid material system. The listed vacuum reference is ≤-0.095 MPa; validate residual voids and seal properties after casting, cure and finishing.

قياس الجرعات والخلط والصب الدقيق منخفض التدفق

The PLC dynamic metering system (≤±0.3% full range) dispenses precisely; the mixing head runs at 8000-12000 r/min, with pouring rate 20-500 g/s for small sealing molds to cut material loss.

هل تحتاج إلى عرض سعر لهذه المعدات؟

اطلب عرض سعر
HF-CPUE-1A1B-Seal-PU

المواصفات الفنية

Standard configuration parameters for the PU seal cast unit. Customizations are available upon request.

المعلمة الفنيةHF-CPUE-1A1B-Seal-PU
معدل الصب20~500 g/s
نسبة المواد الخامMOCA: 100:8~13; BDO: 100:3~6
سعة الخزان50 / 100 / 150 L
سرعة رأس الخلط8000~12000 دورة/دقيقة
دقة قياس الجرعات الديناميكي≤±0.3% (النطاق الكامل)
تكوين الخزاناتتحكم مستقل في درجة الحرارة لمكوّني 1A1B
التحكم في درجة حرارة الموادالخزان A: 30~80℃؛ الخزان B: MOCA (90~115℃)/BDO (25~50℃)
إزالة الرغوة بالتفريغتفريغ ≤-0.095MPa
نظام التنظيفتنظيف بالدوران التلقائي + تفريغ التنظيف بالهواء
القدرة5.5~7.5 kW
نظام التحكمPLC + شاشة لمس + تخزين تركيبات متعددة
النظام المطبقبريبوليمر CPU + موسّع السلسلة MOCA/BDO
الضمانسنة واحدة
الشهاداتتأكيد المستندات المعمول بها للتكوين المقدَّم في عرض السعر
لماذا تختارنا

الميزات والفوائد الرئيسية

Engineered for precision, flexibility, and efficiency in multi-specification seal production.

One-Key MOCA/BDO Dual Chain Extender Switching

Supports one-key switching between MOCA and BDO dual chain extenders, enabling a single machine to cover the production process of various seals.

Dynamic Full-Range Ultra-High Precision Metering

Metering control supports repeatable component delivery over the specified operating range. Seal dimensions, flash and leakage performance depend on formulation, tooling, cure and finishing and require product inspection.

Small Flow Precision for Sealing Molds

The small flow capability (20–500 g/s) is precisely tailored for small sealing molds, resulting in low raw material loss and effectively improving product yield.

تحكم مستقل في درجة الحرارة 1A1B

Simple and stable operation with independent temperature control for each component, ideally suited for small-batch, multi-specification seal flexible production.

إزالة الرغوة بالتفريغ (≤-0.095 ميغاباسكال)

Vacuum preparation supports gas reduction in the liquid feed. Residual voids, density and seal properties require validation with the selected formulation, tooling and cure conditions.

تحكم ذكي بـ PLC مع تخزين متعدد التركيبات

PLC + touch screen interface with multiple formula memory simplifies operation, reduces errors, and enables rapid changeovers between formulations for different seal types.

ناقش تكوين معداتك

شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.

المزيد من المعدات

تصفح معدات أخرى في كتالوجنا. هذه القوائم مخصصة لاكتشاف المنتجات؛ ويتم تأكيد التوافق ونطاق خط الإنتاج بشكل منفصل وفقًا لمتطلباتك من المواد والعمليات والمخرجات.

الدعم

الأسئلة الشائعة

What types of seals can this machine produce?
This machine is designed for producing a wide range of industrial polyurethane seals, including general seals for industrial equipment, hydraulic systems, and construction machinery. It supports both static and dynamic sealing applications.
How does the machine support different seal formulations?
The system supports one-key switching between MOCA high-strength and BDO hydrolysis-resistant dual chain extenders. This enables a single machine to cover the production of various seal types with different performance requirements.
What metering accuracy can I expect for small seal production?
The dynamic metering system achieves ≤±0.3% accuracy across the full range. The small flow capability (20–500 g/s) is precisely tailored for small sealing molds, ensuring minimal raw material loss and high product yield.
Which checks establish seal quality and leakage performance?
Review component metering and vacuum preparation together with the selected formulation, tooling, cure and finishing. The listed vacuum reference is ≤-0.095 MPa. Inspect representative seal dimensions and residual voids and test leakage under the intended static or dynamic service conditions.
Is this machine suitable for small-batch, multi-specification production?
Yes. The 1A1B independent temperature control design ensures simple and stable operation. Combined with PLC touch screen control and multi-formula storage, the machine is ideally suited for small-batch, multi-specification seal flexible production.
What are the oil resistance and wear resistance capabilities?
The machine is compatible with both MOCA high-strength formula (excellent wear resistance for high-pressure dynamic seals) and BDO hydrolysis-resistant formula (excellent oil resistance for hydraulic applications), meeting the core production needs of oil resistance, wear resistance and leakage prevention.

هل أنت مستعد لمناقشة مشروعك؟

تواصل مع فريقنا
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube