آلة رغوة البولي يوريثان عالية الضغط | الوسائد الصوتية للسيارات
High-pressure PU metering and impingement mixing for automotive acoustic pads, with configured material conditioning, mold interfaces and controls.
معدل تدفق التصريف
50-1000 g/s pouring rate
نسبة الخلط
Polyether:Isocyanate = 100:45-60 (reference recipe)
مرجع الدقة
±0.3% (reported full dynamic range)
التحكم في درجة الحرارة
20-45°م
Engineered for Soundproof, Precision-Foamed Automobile Acoustic Pads
High-pressure PU metering and impingement mixing for automotive acoustic pads, with configured material conditioning, mold interfaces and controls.
This high-pressure PU equipment meters polyol and isocyanate and combines them by high-pressure impingement mixing for automotive acoustic pads. The listed combined dispensing range is 50–1,000 g/s; the selected shot and operating point follow the formulation and tooling.
تُحدَّد تهيئة المواد والتدوير وتكوين رأس الخلط وواجهات القوالب أو خط الإنتاج وفقًا للحزمة المورَّدة. وتتطلب كثافة الجزء النهائي وجودة سطحه وأداءه في الخدمة التحقق من المواد والقالب والعملية.

سير العمل التشغيلي
تحضير المواد الخام
Prepare polyether polyol and isocyanate at the target mix ratio (100:45-60) for the acoustic foam recipe, with proper conditioning for uniform cell formation.
Mold Carrier Loading & Temperature Setting
Load polyol into Tank A and isocyanate into Tank B; the 1A1B temperature control maintains 20-45°C, while the hydraulic mold carrier positions and locks the mold.
الخلط الصدمي عالي الضغط والسكب
يتم قياس جرعات المكوّنين وضخّهما في رأس الخلط بالتصادم. وتُنسّق عملية القذف ضمن نطاق التكوين المذكور البالغ 50–1,000 غ/ث مع القذفة المختارة والتحكم في ملء القالب والخط.
Foaming, Curing, Demolding & Trimming
The material foams and cures in the mold; the mold carrier opens and ejects the part, and automatic edge trimming completes the acoustic pad with consistent dimensions.
هل تحتاج إلى عرض سعر لهذه المعدات؟
اطلب عرض سعرالمواصفات الفنية
Reference specifications for high-pressure PU metering and impingement mixing. Tank sizes, material recipe, mold carriers and acceptance conditions are defined for the acoustic-pad application.
| المعلمة الفنية | HF-HPM-1A1B-AcousticPad |
|---|---|
| المكوّنات | 1A1B two-component PU system |
| نطاق الإخراج | 50-1000 g/s pouring rate |
| نطاق نسبة الخلط | Polyether:Isocyanate = 100:45-60 (reference recipe) |
| مرجع الدقة | ±0.3% (reported full dynamic range) |
| ضغط التشغيل | 10-18 MPa impingement mixing pressure |
| سعة الخزان / القادوس | 100 L or 150 L per tank (optional) |
| تكوين الخزانات | تحكم مستقل في درجة حرارة المكوّنين 1A1B + تقليب بالتدوير |
| التحكم في درجة الحرارة | 20-45 درجة مئوية |
| نظام التنظيف | تنظيف تلقائي بالتفريغ الهوائي (خالٍ من المذيبات وصديق للبيئة) |
| القدرة | 5.5-7.5 كيلوواط |
| نظام التحكم | PLC + شاشة لمس + تخزين متعدد الصيغ |
| نظام التطبيق | PU flexible / semi-rigid acoustic foam system (customized per acoustic pad recipe) |
| الضمان | سنة واحدة |
| الشهادات | تأكيد المستندات المعمول بها للتكوين المقدَّم في عرض السعر |
المزايا الرئيسية
Six equipment and process features to consider when configuring a high-pressure PU foaming machine for automobile acoustic pads.
الخلط بالاصطدام عالي الضغط
تُخلط تدفقات البوليول والإيزوسيانات بالتصادم عالي الضغط. ويتم اختيار توصيل المكوّنات وإعدادات القذف وواجهة القالب وفقًا للتركيبة.
Uniform Pouring over Large Areas
Supports acoustic pad molds up to 2,000 × 1,500 mm. Hydraulic mold carriers can be configured for large parts and alternating production.
Automatic Mold Carrier & Edge Trimming
The hydraulic mold carrier completes opening, closing, locking, mold-plate up/down, clamping and edge trimming, replacing manual trimming with consistent dimensions and less labor.
تنظيف رأس الخلط وفق التكوين
يُحدَّد تسلسل التنظيف والمواد الاستهلاكية وفقًا لرأس الخلط المختار والتركيبة. ولا تحدد ترتيبات التنظيف انبعاثات الجزء النهائي أو أداء الرائحة.
PLC Intelligent Control with Multi-Formula Switchover
One-click multi-formula switchover and fault self-check reduce manual errors and enable rapid changeovers between different acoustic pad specifications.
Complete Automated Production Line Integration
عاير إمداد المكوّنات عند لزوجة المادة ودرجة الحرارة وتدفق التشغيل والدفعة المتفق عليها. يدعم التحكم في قياس الجرعات المعالجة القابلة للتكرار؛ وتتطلب أبعاد الجزء النهائي وخصائصه تحققًا منفصلًا.
ناقش تكوين معداتك
شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.
الأسئلة الشائعة
What material systems can the high-pressure PU foaming machine process for automobile acoustic pads?
What is the maximum mold size this machine supports?
Does the machine support automatic edge trimming?
What is the dosing accuracy of the metering system?
What mixing route does this equipment use?
هل أنت مستعد لمناقشة مشروعك؟
تواصل مع فريقنا