معدات إنتاج رغوة البولي يوريثان عالية الضغط
127 Views

خط إرغاء PU عالي الضغط | أبواب غرف التبريد

قياس الجرعات والحقن المتزامن متعدد الرؤوس لأبواب الغرف الباردة السميكة، بالتنسيق مع قوالب هيدروليكية مُدفّأة وملء القوالب.

معدل تدفق التصريف

200–300 kg/min, combined chemical injection rate of the configured multi-head system

نسبة الخلط

100:100 to 100:150 (By weight)

مرجع الدقة

±0.3% (مع التتبع المستمر لتدفق الكتلة بمقياس كوروليس)

مرجع تكييف المواد

22°C ±0.5°C in the listed tank-conditioning step

التوافر عند الطلب جدول التسليم حسب عرض السعر ضمان لمدة سنة واحدة
Heavy-Section Discontinuous Panel Foaming Automation

Precision Staggered Foaming for Extra-Thick Cold Storage Doors

قياس الجرعات والحقن المتزامن متعدد الرؤوس لأبواب الغرف الباردة السميكة، بالتنسيق مع قوالب هيدروليكية مُدفّأة وملء القوالب.

The HF-CRD250-LP reference uses high-pressure PU metering and impingement mixing with heated hydraulic tooling for thick cold-room doors. Its model suffix does not indicate the mixing-pressure class.

The configured multi-head system has a combined chemical injection-rate range of 200–300 kg/min. A 75 kg reference shot over 18.2 seconds corresponds to approximately 247.3 kg/min, within this range. Injection time is separate from mold dwell and complete curing.

Door thickness, material reaction heat, fixture loading and finished-door flatness are validated for the selected formulation, mold and acceptance plan.

رسم تصوري: رسم تصوري مولَّد لمناقشة العملية؛ وليس صورة فوتوغرافية للآلة المحددة أو لمنشأة عميل أو لمشروع منفَّذ.

Precision Staggered Foaming for Extra-Thick Cold Storage Doors

تدفق المواد ومبدأ العمل

Door Metal Shell Pre-Assembly & Gasket Alignment

Upper and lower pre-painted steel or stainless skins with integrated thermal break profiles and heavy hinge reinforcements are loaded into the preheated hydraulic press platen.

التكييف الكيميائي عالي الضغط

Polyol blend and polymeric isocyanates are conditioned in 300 L stainless vessels under thermal oil jacket circulation at 22°C ± 0.5°C to stabilize reaction kinetics.

Multi-Head High-Pressure Injection

The configured heads operate within a 200–300 kg/min combined chemical-injection range. The 75 kg / 18.2 s reference corresponds to approximately 247.3 kg/min; sequencing follows the mold and material reaction window.

Pressurized Hydraulic Cure & Dwell

The 200-ton hydraulic press maintains 1.5 bar counter-pressure across the expanding door shell; platens heated to 45°C ensure uniform closed-cell density without core scorch.

Hydraulic De-Clamping & Dimensional Audit

Following a 25-minute cure dwell, hydraulic cylinders unlock the press platens; pneumatic kickers eject the finished 250 mm door onto an inspection handling table.

هل تحتاج إلى عرض سعر لهذه المعدات؟

اطلب عرض سعر
بيانات التكوين

الطراز والمعايير الفنية

Combined chemical injection rate: 200–300 kg/min for the configured multi-head system. A 75 kg reference shot over 18.2 s corresponds to approximately 247.3 kg/min. The 15–17.5 MPa value describes the high-pressure metering/impingement circuit; shot time, mold dwell and cure time are separate quantities.

المعلمة الفنيةHF-CRD250-LP
المكوّنات2 Components (A: Polyol blend + Blowing agent, B: Polymeric MDI)
نطاق الإخراج200–300 kg/min, combined chemical injection rate of the configured multi-head system
نطاق نسبة الخلط100:100 to 100:150 (By weight)
مرجع الدقة±0.3% (مع التتبع المستمر لتدفق الكتلة بمقياس كوروليس)
مصدر الطاقة380 فولت، ثلاثي الأطوار، 50 هرتز (اختياري مخصص 440 فولت/480 فولت 60 هرتز)
ضغط التشغيل15.0 to 17.5 MPa (High-pressure metering and impingement)
سعة الخزان / القادوسDay tanks: 2 x 300 L (Stainless steel with thermal jackets)
الوزن16,500 kg (Combined press bed, hydraulic power unit, and metering skid)
الأبعاد (الطول×العرض×الارتفاع)7200 mm x 3400 mm x 3200 mm
تكوين المعدات

الميزات الرئيسية للمعدات

Material conditioning, metering, mixing heads, the specified press fixture and coordinated controls. Door hardware, tooling details, chemicals and site utilities are confirmed separately.

250 mm Extra-Thick Section Capability

Supplied configuration reference: Engineered to pour large-volume panels with core thicknesses up to 250 mm without center core scorching. Actual capability requires material and tooling validation.

Multi-Head Staggered Injection

Supplied configuration reference: PLC-coordinated injection across multiple nozzles prevents resin pre-cure and eliminating flow knit lines. Actual capability requires material and tooling validation.

95% Closed-Cell Cryogenic Stability

Supplied configuration reference: Fine microcellular matrix limits low-temperature (-30°C) dimensional shrinkage to under 0.5%. Actual capability requires material and tooling validation.

200-Ton Anti-Bowing Press Bed

Supplied configuration reference: Rigid welded press platens withstand 1.5 bar foaming pressures, locking door flatness within ±0.5 mm. Actual capability requires material and tooling validation.

ناقش تكوين معداتك

شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.

أسئلة التخطيط

الأسئلة الشائعة

How does staggered multi-head injection prevent core scorch in 250 mm doors?
Staggered sequential injection distributes chemical reaction heat, preventing center temperature spikes above 160°C. Confirm the applicable material, tooling, test method and original records for the specified configuration.
Why is closed-cell content over 95% critical for deep-freeze storage doors?
High closed-cell content prevents water vapor migration, eliminating internal ice formation that degrades thermal insulation. Confirm the applicable material, tooling, test method and original records for the specified configuration.
What maintains door flatness within ±0.5 mm during high foam expansion?
Rigid welded 200-ton hydraulic press platens resist 1.5 bar internal cavity pressure without platen bowing. Confirm the applicable material, tooling, test method and original records for the specified configuration.
Can this machine produce curved or 90-degree corner insulation panels?
Yes, modular side-containment fixture blocks accommodate right-angle corner panels and irregular edge rebates. Confirm the applicable material, tooling, test method and original records for the specified configuration.

هل أنت مستعد لمناقشة مشروعك؟

تواصل مع فريقنا
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube