Resin Transfer Molding Production Solution Banner background
Soluciones de fabricación

Solución de producción para moldeo por transferencia de resina

Build an RTM workflow for injecting a qualified liquid resin into dry reinforcement within a closed matched tool.

Objetivo de producción

Configure Closed-Tool Resin Transfer Molding

Select resin preparation, dry-reinforcement handling and closed-tool injection for your laminate, geometry and production target.

Primero el producto y el material

Comience con el plano del producto terminado, el sistema de materiales y los requisitos de aceptación. La ruta de proceso y la configuración de los equipos se evalúan conjuntamente.

Compare related routes: Dry-Fiber Preforming · HP-RTM · Vacuum Infusion.

Capacidad en todo el proceso

Defina la producción incluyendo preparación, conformado/reacción, curado, manipulación e inspección. La etapa más lenta y los cambios de producto determinan la capacidad práctica de la línea.

Review preform permeability, resin working time and closed-tool flow before choosing RTM injection. Gates, vents, vacuum and clamp/thermal interfaces must allow the intended filling sequence; use trial and inspection evidence rather than borrowing HP-RTM ratings.

Flujo de fabricación

RTM Preforming, Injection and Cure Workflow

Una secuencia de planificación para la ruta especificada. Los ajustes finales y las condiciones de aceptación se establecen mediante la revisión del material y de la pieza.

01

Design the preform and flow

Review fiber architecture, resin viscosity, permeability and gate/vent positions.

02

Prepare the closed tool

Load the preform and inserts; confirm sealing, temperature and clamping.

03

Prepare and meter resin

Condition resin components and use the qualified mixing and degassing arrangement.

Datos de ingeniería

Información necesaria para configurar la línea

Facilitar estos datos para poder definir la gama de equipos, las interfaces y el plan de validación.

Dato de diseñoInformación requerida
Laminate designFiber form, volume fraction, thickness and inserts
ResinComponent ratio, viscosity, gel/cure window and material data
ToolingGate/vent layout, clamp and thermal capability
ProductionCycle, automation and quality targets
Esta tabla es un resumen de diseño, no una garantía de rendimiento de la máquina. Los valores nominales se confirman en la propuesta del proyecto junto con sus condiciones de material y de servicio.
Diseño del proyecto

Coordinar el equipo con el proceso

Evaluar la repetibilidad, la manipulación y la aceptación en todo el flujo de trabajo.

Flow planning

Review preform permeability, gates and vents against the resin window.

Tool coordination

Define sealing, clamp, vacuum and thermal duties for the selected mold.

Laminate verification

Record filling and cure, then inspect agreed regions and defects.

Preguntas de planificación

Preguntas frecuentes

Compare RTM routes, reinforcement preparation and equipment scope.

What distinguishes RTM from HP-RTM and vacuum infusion? +
RTM injects liquid resin into dry reinforcement in a closed matched tool. HP-RTM uses configured high-pressure metering and mixing; vacuum infusion draws resin into reinforcement under a sealed bag. Tooling and filling strategies differ.
Does RTM require a separate preforming cell? +
Dry reinforcement is positioned in the tool before injection. Whether a separate preforming cell is needed depends on fiber architecture, part geometry and handling requirements.
How are resin injection and cure conditions selected? +
Review resin viscosity and working time, reinforcement permeability, gate and vent positions, tool limits and the material supplier cure instructions. Settings are established for the selected part.
What equipment is included in the RTM package? +
No main product is assigned here. Define resin preparation and delivery with the actual closed tool, clamp and cure interfaces. Review preform permeability, resin working time and closed-tool flow before choosing RTM injection. Gates, vents, vacuum and clamp/thermal interfaces must allow the intended filling sequence; use trial and inspection evidence rather than borrowing HP-RTM ratings.
¿Qué datos se necesitan para esta configuración? +
Laminate/preform, resin viscosity and cure window, tool gates/vents, clamp/thermal data, cycle and inspection targets. Identify retained equipment and the required acceptance documents.
What should an RTM filling trial record? +
Record resin conditions, tool preparation and vacuum where used, delivery, flow-front/vent observations and filling duration. Confirm cure and inspect the resulting laminate using defined acceptance criteria.

Envíe sus objetivos de producción

Share the following for this application: Laminate/preform, resin viscosity and cure window, tool gates/vents, clamp/thermal data, cycle and inspection targets. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Revisión de producto y materiales Debate sobre el proceso y el alcance
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube