Pure PU Engineering Tire Filling Solution Banner background

Solución de relleno de neumáticos técnicos de PU puro

Haifeng configures pure PU tire filling with two-component metering, controlled cavity filling and curing for puncture-resistant off-road tire assemblies.

2Componentes PU Liquid Metering
Engineering Tire-Cavity Filling

Solución de relleno de neumáticos técnicos de PU puro

Replace the air space in an existing rubber tire casing with a two-component polyurethane filling system that cures inside the casing. This route preserves the tire tread and casing and is distinct from molding an entire polyurethane tire around a wheel center. Select the filling formulation and process around tire size, duty, load and service requirements.

Dedicated Cavity-Filling Route

Use the existing casing as the filling envelope. Do not apply high-pressure closed-mold tire-casting settings to this route.

Define the Assembly and Formulation

State tire and rim identity, load and speed conditions, formulation, ratio basis, material quantity and cure criteria in the technical specification.

Haifeng coordinates material delivery, the filling connection, controls and curing-workflow integration for the specified order. Delivery includes on-site commissioning, operator training, a 1-year machine warranty and long-term spare parts support. The filling record should identify the inspected casing and rim, formulation, calibrated components, venting, termination and cure/release criteria. Keep liquid delivery, tire-cavity settings and the filled-assembly duty as separate specifications.

Filling Workflow

From Material Preparation to the Cured Tire Assembly

Four coordinated stages for the selected tire, formulation and equipment configuration.

01

Casing and Wheel Preparation

Inspect the existing tire casing and rim and define the tire-specific pressure, material quantity and cure schedule. The workpiece is a tire/rim assembly, rather than a tire-shaping mold.

INPUTS: EXISTING RUBBER CASING + TWO-COMPONENT PU FILLING SYSTEM
02

Two-Component Material Delivery

Condition and meter the two PU components to the selected formulation. The Haifeng reference unit lists an A:B ratio of 100:100; establish the ratio basis with the selected material system.

HF-LPM-1A1B-OTR; LISTED DISCHARGE RANGE 300–1000 L/H
03

Tire-Cavity Filling

Mix and introduce the liquid filling into the existing tire cavity with a suitable filling connection and air-release arrangement. Control tire pressure to the casing and rim specification.

EQUIPMENT WORKING-PRESSURE RANGE: 0–2 MPA; NOT THE TIRE PRESSURE SETPOINT
Configuración y parámetros del proceso

Equipment Reference and Application Inputs

Existing Haifeng equipment data are stated separately from tire-specific process settings.

ParámetroReference ValueScope
RutaTwo-component PU, without intentionally added rubber granulesExisting pneumatic tire casing
Reference Haifeng ModelHF-LPM-1A1B-OTRDedicated filling-equipment reference
Caudal de descarga300–1000 L/hEquipment configuration; operating point is application dependent
Proporción de mezcla de materias primasA:B = 100:100Equipment configuration; operating point is application dependent
Volumen del depósito30 LEquipment configuration; operating point is application dependent
Potencia total del motor2,2 kWEquipment configuration; operating point is application dependent
Precisión de dosificación±0,3 %Equipment configuration; operating point is application dependent
Presión de trabajo0–2 MPaEquipment configuration; operating point is application dependent
Tire Filling PressureSet from tire/rim and application requirementsDistinct from mixing or equipment working pressure
Load CapacitySpecify per wheel and duty conditionsDo not derive a 12-ton rating from the filling machine
Cure ScheduleSelected PU material system data and release checkTime and temperature are formulation specific
Garantía1 añoHaifeng machine warranty
Discharge flow, working-pressure range and installed power describe equipment. They do not specify a tire load rating, universal recipe or tire-cavity pressure.
Dosificación, mezcla y equipos de línea

Reference Haifeng Tire-Filling Equipment

The linked equipment is for filling an existing casing, not molding a new solid PU tire. Define the hose, connection and material-preparation package.

Aspectos técnicos a considerar

Configuration Priorities

Define each control function around the tire and formulation.

Metering and Recipe Control

Specify the liquid components and ratio basis independently of any granule feed.

Separate Pressure Settings

Define the tire-cavity setpoint and the equipment operating limits separately.

Coordinated Filling Integration

Match the mixing, material path and filling connection to the liquid or particulate mixture.

Batch and Release Records

Record material batches, filled quantity, pressure and cure-release checks for each order.

Preguntas sobre planificación de la producción

Tire-Filling Questions

Key differences between tire filling and complete tire molding.

Is this the same process as molding a solid PU tire? +
No. This route fills an existing rubber tire casing. A molded PU tire is shaped in dedicated tooling as a new tire or wheel assembly.
Can the pump working-pressure range be used as the tire filling pressure? +
No. The equipment range and tire-cavity setpoint are separate. Select the tire pressure from the casing, rim and application requirements.
Is there one cure time for all PU filling formulations? +
No. Specify the selected material-system time, temperature and release criteria rather than a universal cycle.
Does the filling machine give the tire a 12-ton load rating? +
No. Specify load per wheel with tire, rim, speed and duty conditions. The filling-machine capacity is a material-delivery parameter.
¿Qué datos se necesitan para esta configuración? +
Tire and rim identification, cavity volume, casing condition, filling material, ratio basis, ambient conditions and release checks. Identify retained equipment and the required acceptance documents.
What should the filling and release record contain? +
Record the approved tire/rim, material batch, calibration, delivered quantity, filling/vent procedure and cure conditions. Agree the inspection and release criteria for the filled assembly; pump pressure is not a tire rating.

Plan Your Engineering Tire-Filling System

Share the following for this application: Tire and rim identification, cavity volume, casing condition, filling material, ratio basis, ambient conditions and release checks. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube