Continuous MC Nylon Rod Casting Solution Banner background

Solución de fundición continua de barras de nailon MC

Coordinate continuous MC Nylon rod or tube casting with reaction tooling, haul-off and synchronized cutting.

Configuración del proceso

Unbroken Vertical Pultrusion for Large-Diameter Structural & Insulating Stock

Continuous cast-nylon stock links prepared monomer delivery to a heated forming die, controlled polymerization, pulling and cutting. Solid rods and hollow tubes use different tooling and stability checks. Electrical properties and molecular-weight statements require material measurements separate from line speed or pump capacity.

Alcance de suministro definido

Define the die/mandrel, thermal controls, haul-off, cutting and downstream conditioning. Annual output must use a stated section, production schedule, availability and accepted yield.

Insumos para la selección del proceso

Rod/tube diameters and wall, formulation, length/cutoff needs, work schedule, downstream machining and electrical tests.

Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Define the die/mandrel, thermal controls, haul-off, cutting and downstream conditioning. Annual output must use a stated section, production schedule, availability and accepted yield.

Ruta de producción

Continuous MC Nylon Rod Casting Workflow

Prepare the monomer system → Feed the forming tool → Polymerize and haul off → Cut, condition and inspect. Define preparation, filling, cure and output timing separately for the selected configuration.

01

Prepare the monomer system

Confirm formulation, dehydration and conditioned feed.

02

Feed the forming tool

Coordinate delivery with the selected solid-rod or hollow-tube tooling.

03

Polymerize and haul off

Validate thermal behavior, release and stable pulling for the section.

Configuración del proceso

Envolvente de ingeniería de la solución de referencia

Configuración existente y referencias de ensayo. Los ajustes del equipo, los resultados del material y los resultados del conjunto terminado son independientes; aplique cada valor solo a su configuración y condiciones documentadas.

ParámetroValor / UnidadConfiguración / Condiciones aplicables
Continuous Finished Diameter RangeØ 50 mm to Ø 200 mm (Solid rod stock)Precision chrome-plated continuous crystallization dies
Hollow Tube Diameter CapabilityØ 100 mm to Ø 300 mm outer diameterInternal water-cooled sizing mandrels for heavy-wall tubes
Dielectric Breakdown StrengthGreater than or equal to 30.0 kV/mmGB/T 1408.1 testing on cured railway insulation stock
Polymer Molecular Weight (Mw)70,000 to 100,000Viscometric measurement on in-die polymerized PA6
Continuous Downward Pull Speed50 to 300 mm/minMulti-track servo caterpillar haul-off with speed encoder
Annual Line Production CapacityUp to 1,500 Metric Tons/yearUninterrupted 24/7 continuous vertical casting operation
Existing application note: Annual output is a planning estimate based on rod diameter, line speed, working hours, availability and yield. Dielectric strength applies to the conditioned material and agreed test method. Molecular-weight and ratio values include their measurement basis. Original process references, with their existing values: Tank vacuum ≤ 0.01 kPa; Moisture < 20 ppm; confirm for selected material and tooling; Delivery flow 2.0–18.0 kg/min; Nitrogen blanket 0.05 MPa; confirm for selected material and tooling; Die temp 160–175°C; Dielectric strength ≥ 30 kV/mm; confirm for selected material and tooling; Pulling speed 50–300 mm/min; Pulling force up to 100 kN; confirm for selected material and tooling; Cutoff accuracy ±1.0 mm; Annual output 1,500 t/y; confirm for selected material and tooling. Supplementary references: monomer 135°C, feed 12 kg/min, thermal sleeve 168°C, pulling force 50–100 kN and a 120 mm/min working example. Confirm the actual rod/tube section, reaction and haul-off records before applying them to capacity calculations. The original cutoff examples span 3m to 6m. Confirm stock handling, saw travel and support for the actual length. Confirm the configuration, material, test method and cycle endpoints before using reference values as acceptance commitments.

Equipos principales de esta solución

Las referencias de equipos se seleccionan según su proceso documentado. La dosificación principal, el suministro auxiliar y las rutas alternativas no constituyen un único paquete estándar.

Controles de proceso y verificaciones de aplicación

Evalúe estas funciones con el material, los moldes y el resumen de producción seleccionados. Los resultados de las piezas acabadas requieren su propia evidencia de aceptación.

Section-specific tooling

Differentiate solid-rod and hollow-tube designs and process limits.

Coupled feed and haul-off

Balance material delivery, reaction and pulling rather than using independent maxima.

Defined material measurements

Report dielectric and molecular-weight results with the specimen and actual measurement method.

Proyectos relacionados

Estas son referencias de aplicación relacionadas. Compare el material, el proceso y los módulos entregados reales; las cifras de proyecto reportadas no son resultados de aceptación para otra línea.

Revisar proyecto
Preguntas de planificación

Preguntas frecuentes

Does line speed establish annual tonnage? +
No. Cross-section, material density, operating hours, availability, transitions and yield all enter the calculation.
How should the molecular-weight reference be interpreted? +
Request the original method, calibration and reported quantity. Do not interchange a viscosity-derived estimate with another molecular-weight definition without supporting data.
¿Qué información se necesita para una configuración preliminar? +
Rod/tube diameters and wall, formulation, length/cutoff needs, work schedule, downstream machining and electrical tests. Identify the equipment and interfaces to retain, plus the required test and acceptance documents.

Hablemos de sus objetivos de producción

Share the following with your production brief: Rod/tube diameters and wall, formulation, length/cutoff needs, work schedule, downstream machining and electrical tests. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Revisión de la configuración basada en la aplicación y los datos del material Documentación acordada de equipo, interfaces y aceptación Formación y soporte definidos para el paquete suministrado
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube