Línea de fundición de nailon MC | Barras y tubos
Alimentación continua de monómero y fundición reactiva vertical con arrastre y corte controlados para formas de stock de nailon MC.
Caudal de descarga
2.0 to 18.0 kg/min (Continuous steady-state flow)
Referencia de relación de flujos de alimentación
1:1 fija (referencia de flujo de alimentación indicada)
Referencia de precisión
±0.2% (Coriolis mass flow continuous tracking)
Configuración de control térmico
2 × 300 L jacketed day tanks and a heated vertical reactive die
Continuous Vertical Polymerization for Large MC Nylon Rods & Tubes
Alimentación continua de monómero y fundición reactiva vertical con arrastre y corte controlados para formas de stock de nailon MC.
Conditioned monomer circuits supply a heated reactive die for vertical MC Nylon rod and tube production. Controlled haul-off and cutting are coordinated with polymerization and the selected stock geometry.
Solid and hollow tooling, annealing and final stock tests are defined separately. Throughput, rod diameter and line speed must describe the same operating point; annual capacity additionally depends on working time and utilization.
Ilustración conceptual: Ilustración generada para el análisis del proceso; no es una fotografía de la máquina especificada, de las instalaciones de un cliente ni de un proyecto entregado.

Flujo de material y principio de funcionamiento
Prepare Monomer and Tooling
Condition the selected monomer streams and install the solid-rod or hollow-stock die.
Feed the Reactive Die
Coordinate metering and mixing with the heated vertical die and material polymerization window.
Haul Off and Cut
Set the puller and cutting sequence for the chosen diameter, wall thickness and length.
Condition and Inspect Stock
Apply the specified post-treatment and inspect finished dimensions and material requirements.
¿Necesita una cotización de este equipo?
Solicitar presupuestoModelo y parámetros técnicos
Reference data describe the selected monomer-feed, die, puller and cutting configuration. Select stock diameter, line speed and material conditions together. Electrical and mechanical stock properties require conditioned-specimen testing.
| Parámetro técnico | HF-MCR200-CV |
|---|---|
| Componentes | 2 Streams (Stream A: Monomer + Catalyst, Stream B: Monomer + Activator) |
| Rango de salida | 2.0 to 18.0 kg/min (Continuous steady-state flow) |
| Rango de relación de mezcla | 1:1 fija (equilibrada volumétrica/por peso) |
| Referencia de precisión | ±0.2% (Coriolis mass flow continuous tracking) |
| Alimentación eléctrica | 380 V, trifásica, 50 Hz (opcional personalizada 440 V/480 V, 60 Hz) |
| Presión de trabajo | 0.3 to 0.5 MPa (Top-feed low-pressure delivery line) |
| Capacidad de tanque/tolva | Day tanks: 2 x 300 L (Stainless steel with thermal jackets) |
| Peso | 9,800 kg (Tower frame, die set, puller, and flying saw) |
| Dimensiones (L×An×Al) | 3500 mm x 2400 mm x 7200 mm (Vertical machine height) |
| Configuración de control térmico | 2 × 300 L jacketed day tanks and a heated vertical reactive die |
Características clave del equipo
Conditioned monomer circuits, heated reactive die, puller, cutting and controls. Hollow/solid tooling, annealing and final stock testing are separately defined.
Vertical Reactive Casting
Coordinate continuous monomer feed, polymerization in the heated die and downward haul-off for the chosen stock geometry.
Stock Quality and Conditioning
Evaluate void content, dimensions and any dielectric requirements on the conditioned rod or tube under the agreed test method.
Controlled Haul-Off
The configured puller follows the selected die, stock dimensions and polymerization window. Rated pulling force does not establish production throughput.
Material Qualification
Molecular-weight and residual-monomer requirements belong to the selected polymerization process and material test method.
Hablemos de la configuración de su equipo
Comparta su producto, materiales, utillaje y requisitos de producción para que podamos revisar el equipo y las interfaces para su proyecto.
Preguntas frecuentes
What is needed to size rod and tube production?
Does a short run establish annual capacity?
Are dielectric strength and molecular weight machine ratings?
What scope follows the reactive die?
¿Listo para hablar de su proyecto?
Contacte con nuestro equipo