Automotive Headliner Box Foaming Solution Banner background

حل الرغونة الصندوقية لسقف المركبات الداخلي

Traditional low-pressure box foaming for semi-rigid automotive headliner blanks, followed by curing, precision slicing and optional lamination.

22كغ/م³ Project Foam Density
70s دورة الكبس في المرحلة اللاحقة
99% Amine Emission Reduction
Low-Pressure Box Foaming

Box Foaming and Slicing for Automotive Headliner Blanks

This headliner route starts with traditional low-pressure polyurethane box foaming. Polyol and isocyanate are metered and dynamically mixed, then poured into a box mold where the semi-rigid foam rises. After curing and conditioning, the foam block is sliced into blanks for acoustic and flame-retardant headliner applications. Lamination and thermoforming are separate downstream operations. The supplied project targets a cured foam density of 22 kg/m³ and low-emission interior panels.

Controlled Semi-Rigid Box Foam

Low-pressure metering and dynamic mixing support uniform rise and repeatable density across each box-foamed block.

Acoustic and Low-Emission Blanks

Cured blocks are sliced to panel thickness before optional lamination, with formulation selected for acoustic, flame-retardant and VOC targets.

Define the intermediate foam block and sheet needed by the headliner operation. Block foaming, conditioning, slicing, lamination and subsequent heated forming are separate duties; specify transfer and quality criteria at each handover.

تسلسل الإنتاج

Low-Pressure Box Foaming and Headliner Blank Workflow

Four stages separate foam block production from downstream headliner forming.

01

Condition and Meter Raw Materials

Condition polyol and isocyanate, then meter the recipe through the low-pressure foaming unit.

02

Dynamic Mix and Box Pour

A mechanical mixing head blends the components and dispenses the mix into the open box mold.

03

Free Rise, Cure and Condition

The foam rises in the box; the block is then cured and conditioned before cutting. Time depends on the formulation and block size.

الإعداد & معايير العملية

المواصفات الهندسية والمعلمات الفنية

The 70-second figure refers to downstream press work in the supplied project, not box-foam demolding.

المعلمة الفنيةSpecification / ValueEngineering Context
التطبيق المستهدفAutomotive headliner and roof acoustic blanksSemi-rigid foam blocks cut to panel thickness
Core ProcessLow-pressure metering, dynamic mixing and box foamingFree-rise foam is cured before slicing
مصفوفة الموادSemi-rigid, low-density polyurethane foamRecipe selected for acoustic and flame-retardant requirements
نطاق كثافة الرغوة20–30 kg/m³; project target 22 kg/m³Confirm density across the cured block
قياس الجرعات والخلطLow-pressure dispensing with dynamic mechanical mixingOutput and mix speed configured to the box size and recipe
Block ConditioningCure and age before precision slicingCure time depends on formulation and block dimensions
دورة الكبس في المرحلة اللاحقة70 s in the supplied projectThermoforming/lamination stage; not box-foam demolding time
Air QualityVDA 278 tested in the supplied projectLow-emission formulation and downstream panel validation
نطاق التوريدLow-pressure foaming unit, temperature control and PLCBox molds, slicing and press interfaces configured by project
Set box dimensions, cure duration, slice thickness and flame-retardant/VOC targets from the headliner design and material trials.
اعتبارات هندسية

المزايا الهندسية الرئيسية

For Low-Pressure PU Box Foam for Automotive Headliners, assess material compatibility, process control, equipment interfaces and changeover needs against your production brief.

22 kg/m³ Project Foam Density

Semi-rigid foam block density is controlled before slicing into lightweight headliner blanks.

Low-Emission Material Route

The supplied project uses a formulation evaluated for automotive interior VOC requirements.

Traditional Box-Foam Process

Low-pressure dynamic mixing and free-rise box foaming create blocks for subsequent curing and cutting.

Cut-to-Thickness Flexibility

Cured foam blocks can be sliced to different blank thicknesses before downstream lamination.

التطبيقات والمشاريع ذات الصلة

مشاريع ذات صلة

Use the linked headliner project for its documented block/sheet and downstream interfaces; material emissions results stay tied to the reported specimen.

عرض المشروع
أسئلة تخطيط الإنتاج

الأسئلة الشائعة

أسئلة هندسية وشرائية حول مسار إنتاج البولي يوريثان هذا.

Is this headliner process high-pressure injection molding? +
No. This route uses low-pressure dynamic mixing and box foaming. The cured semi-rigid foam block is sliced before downstream headliner forming.
When are headliner blanks sliced? +
After the box-foamed block has cured and conditioned; the required timing depends on the formulation and block dimensions.
Does the 70-second figure describe box-foam demolding? +
No. It refers to a downstream thermoforming/lamination press cycle in the supplied project.
كيف يختلف الإنتاج بالصب في القوالب عن الإنتاج المستمر للكتل الرغوية (Slabstock)؟ +
يقوم نظام رغوة الكتل المتصلة بقياس تركيبة البولي يوريثان وخلطها على ناقل تشكيل متحرك لإنتاج كتلة رغوة متصلة تُقطع وتُعالَج لاحقًا. أما نظام الرغوة في الصندوق فيسكب دفعات منفصلة في قوالب صندوقية للانتفاع الحر والتصلّب والتكييف قبل القطع أو التقطيع. ويُختار المسار وفقًا للتركيبة وحجم الإنتاج وأبعاد الكتلة ومخطط المصنع.
ما المدخلات اللازمة لهذا التكوين؟ +
Formulation, foam-block geometry, density target, conditioning instructions, required sheet thickness, cutting demand and downstream laminate. Identify retained equipment and the required acceptance documents.
Where does the box-foaming package end in headliner production? +
Agree the block preparation and discharge boundary, then identify conditioning, slicing, lamination and forming equipment separately. A downstream press time is not the upstream block-production cycle.

ناقش مشروع الإنتاج الخاص بك في قطاع السيارات

Share the following for this application: Formulation, foam-block geometry, density target, conditioning instructions, required sheet thickness, cutting demand and downstream laminate. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

اتصل بنا

لمعرفة كيفية تعاملنا مع معلومات استفسارك، اقرأ سياسة الخصوصية.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube