آلات صب مطاط البولي يوريثان المرن
133 مشاهدة

خط صب عجلات PU الأوتوماتيكي | عجلات AGV والرافعات الشوكية

إنتاج مُهيَّأ لعجلات البولي يوريثان الصلبة، يشمل واجهات تجهيز القلب والتسخين المسبق بالحث والتوزيع ثنائي التدفق والمعالجة في قوالب مُفهرسة.

معدل تدفق التصريف

2.0 to 18.0 kg/min (Dual-flow matrix switching)

نسبة الخلط

100:8 to 100:25 (By weight)

مرجع الدقة

±0.2% (Continuous closed-loop Coriolis feedback)

Core Preheating Reference

90°C ±2°C metal-core preheating

التوافر عند الطلب جدول التسليم حسب عرض السعر ضمان لمدة سنة واحدة
AGV & Forklift Wheel Production Automation

High-Bonding Automated Polyurethane Solid Wheel Casting

إنتاج مُهيَّأ لعجلات البولي يوريثان الصلبة، يشمل واجهات تجهيز القلب والتسخين المسبق بالحث والتوزيع ثنائي التدفق والمعالجة في قوالب مُفهرسة.

إنتاج مُهيَّأ لعجلات البولي يوريثان الصلبة، يشمل واجهات تجهيز القلب والتسخين المسبق بالحث والتوزيع ثنائي التدفق والمعالجة في قوالب مُفهرسة.

تشمل الحزمة تحضير المواد، والخلط الديناميكي ثنائي التدفق، والتسخين المسبق لصرة العجلة بالحث، وخط القوالب المُسخّن المحدد ووحدات التحكم. وتُعدّ عمليات السفع/التنظيف الآلية وفك القوالب الهيدروليكي اختيارية. تُوَرَّد مادة البوليمر الأولي وعوامل الترابط بشكل منفصل؛ أما طاقة الموقع والهواء المضغوط فهي واجهات يتحملها العميل. وتعتمد الطاقة الإنتاجية على عدد مواضع القوالب المتوازية ومراحل الدورة وحجم المنتج.

High-Bonding Automated Polyurethane Solid Wheel Casting

تدفق المواد ومبدأ العمل

Core Surface Abrasive Blasting & Bonding Adhesive Application

Forged steel or ductile iron wheel cores are automatically grit-blasted to Sa 2.5 cleanliness and spray-coated with Chemlok bonding primer before entering a drying tunnel.

Medium-Frequency Induction Core Preheating

Primed wheel cores pass through a medium-frequency induction heating coil, bringing metal core temperatures rapidly to 90°C ± 2°C in 45 seconds to activate the bonding adhesive.

High-Accuracy Servo Polyurethane Metering

High-precision servo-driven gear pumps measure MDI prepolymer and 1,4-BDO chain extender under continuous Coriolis mass flow control, maintaining mix ratios within ±0.2%.

Dual-Flow Matrix Dynamic Dispensing

Material enters the dual-flow mixing head; a low-flow nozzle injects 3 kg/min into the narrow hub clearance to displace air, before the main nozzle floods the tire tread cavity at 15 kg/min.

In-Mold Pressurized Curing & Conveyance

Filled wheel molds travel along a heated 100°C closed-loop indexing conveyor, achieving demold green strength in 15 minutes before automated hydraulic extraction and post-curing.

هل تحتاج إلى عرض سعر لهذه المعدات؟

اطلب عرض سعر
بيانات التكوين

الطراز والمعايير الفنية

Configuration values from the supplied HF-CPU180-WL brief. Final performance is confirmed for the chemical formulation, tool, operating conditions and original calibration records. Casting-circuit pressure is distinct from finished-component service or qualification pressure.

المعلمة الفنيةHF-CPU180-WL
المكوّنات2 Primary Streams (A: Prepolymer, B: Curative) + 1 Color/Additive
نطاق الإخراج2.0 to 18.0 kg/min (Dual-flow matrix switching)
نطاق نسبة الخلط100:8 to 100:25 (By weight)
مرجع الدقة±0.2% (Continuous closed-loop Coriolis feedback)
مصدر الطاقة380 فولت، ثلاثي الأطوار، 50 هرتز (اختياري مخصص 440 فولت/480 فولت 60 هرتز)
ضغط التشغيل0.3 to 0.7 MPa (Metering lines and dynamic head)
سعة الخزان / القادوسTank A: 200 L (Oil-jacketed), Tank B: 80 L (Stainless steel)
الوزن4,200 kg (Main casting unit and induction heater)
الأبعاد (الطول×العرض×الارتفاع)3200 mm x 2100 mm x 2400 mm
Induction Preheating Cycle45 seconds (To reach 90°C ± 2°C); Medium-frequency induction coil
Single-Wheel Molding Tact Time≤ 90 seconds (For Ø 300 mm solid wheel); Dual-flow matrix injection
Interfacial Peel Adhesion> 30 kN/m (Polyurethane to metal core); ASTM D429 Method B 90° peel
Dynamic Rolling Temperature≤ 45°C (Continuous 25 km/h at 3-ton load); Drum endurance test bed
تكوين المعدات

الميزات الرئيسية للمعدات

تشمل الحزمة تحضير المواد، والخلط الديناميكي ثنائي التدفق، والتسخين المسبق لصرة العجلة بالحث، وخط القوالب المُسخّن المحدد ووحدات التحكم. وتُعدّ عمليات السفع/التنظيف الآلية وفك القوالب الهيدروليكي اختيارية. تُوَرَّد مادة البوليمر الأولي وعوامل الترابط بشكل منفصل؛ أما طاقة الموقع والهواء المضغوط فهي واجهات يتحملها العميل. وتعتمد الطاقة الإنتاجية على عدد مواضع القوالب المتوازية ومراحل الدورة وحجم المنتج.

Hub Induction Preheating

The specified induction stage conditions the metal hub; adhesive selection and actual bonding performance require validation.

Dual-Flow Dispensing

Programmed leading and main-fill rates are selected for hub clearance and tread cavity geometry.

Material and Endurance Testing

Rolling heat and bond durability are verified for wheel size, compound, load and speed rather than inferred from the dispenser.

Indexed Production Interfaces

Mold indexing and curing can operate in parallel. Total output requires a complete line balance and operating record.

ناقش تكوين معداتك

شارك معلومات منتجك والمواد والتجهيزات القالبية ومتطلبات الإنتاج كي نتمكن من مراجعة المعدات والواجهات لمشروعك.

أسئلة التخطيط

الأسئلة الشائعة

How are hub preheating and bonding targets validated?
Hub preheating is selected against the adhesive and substrate. The supplied 90°C/45-second reference does not by itself guarantee >30 kN/m bond strength; verify the complete bonded system and original peel-test conditions.
How does dispensing time differ from in-mold curing time?
Leading and main-fill flow profiles are developed for wheel clearance and cavity volume. The stated 90-second dispensing/indexing reference is distinct from the supplied 15-minute in-mold cure.
How are wheel rolling temperature and durability verified?
Rolling heat depends on wheel geometry, compound, loading, speed and environment. The supplied ≤45°C result is a project test claim, not a temperature guarantee for every MDI/PTMG wheel.
How is the complete wheel-line shift output established?
The supplied brief quotes 800 wheels per eight-hour shift. A single 90-second one-wheel serial station would produce at most 320 before downtime; the larger output requires a verified parallel/multi-cavity layout and line-balance record.

هل أنت مستعد لمناقشة مشروعك؟

تواصل مع فريقنا
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube