Resin Batching and Transfer Solution Banner background
Химическая переработка

Решение для дозирования и передачи смолы

Спланируйте систему дозирования и передачи смолы совместно с Haifeng. Определите обработку материалов, технологические ёмкости, трубопроводы, средства управления и требуемые заводские интерфейсы.

Химическая переработка

Coordinate Resin Batching and Material Transfer

Configure resin receipt, preparation, batch measurement and transfer as separate duties. Material viscosity, temperature, chemical compatibility and receiving conditions determine the vessel, pump, valve and pipework arrangement.

Material and Vessel Interfaces

Define material supply points, vessel duties and connections for the selected process.

Factory Integration

Coordinate supporting structures, access, pipe routing and utilities with the production area.

Define the batch handover from ingredient receipt through measured addition to the receiving process. Record the smallest addition separately from total batch mass, then agree how line hold-up, drain-down and any retained material are accounted for when the prepared resin is transferred.

Настроенный технологический маршрут

Подготовка материала и производственные интерфейсы

Приведенные ниже этапы описывают функциональный маршрут. Поставляемое оборудование, последовательность операций и состояния управления определяются для выбранной рецептуры и принимающего процесса.

01

Receive and identify materials

Connect the selected container or storage supply, verify ingredient identity and define the required compatibility and containment.

SUPPLY FORM AND MATERIAL DATA
02

Prepare and measure the batch

Use the agreed vessel and agitation duty. Select weighing or another specified measurement method for the addition range and batch requirement.

MEASUREMENT METHOD AND BATCH RANGE
03

Transfer to the receiving process

Coordinate pump selection, pipe routing, valve sequence and receiving capacity. Review pressure, drainability and product changeover with the material properties.

TRANSFER CONDITIONS AND RECEIVING INTERFACE
Условия конфигурации

Условия выбора и границы поставки

Используйте эти условия для определения конфигурации и метода приемки. Производительность, допуск по дозированию и приемка продукта задаются для выбранного применения.

Область выбораТребуемые условияРазграничение области
Viscosity and temperatureProvide the operating range, not only an ambient viscosity value.Select agitation, transfer components and any conditioning duty.
Batch measurementDefine minimum ingredient addition, total batch mass and permitted error separately.A scale display increment is not the guaranteed dosing accuracy.
Transfer dutyState receiving elevation, route, required delivery time and allowable conditions.Transfer flow and batching accuracy are separate specifications.
Changeover and cleaningIdentify incompatible materials, drain/flush requirements and waste collection.Cleaning method follows material compatibility and the agreed procedure.

Delivered Installation Views

Project photographs have been edited to remove identifying details.

Смежные маршруты химической переработки

Химическое производство «под ключ» · Сравнить решения для подготовки материала

Specify equipment duties and acceptance conditions for the selected material system and operating schedule.
Аспекты интеграции

Plan the Installation as a Connected System

Эти особенности конфигурации обеспечивают поддержку согласованного процесса. Характеристики материала, порядок эксплуатации и приёмка продукции оцениваются для конкретного применения.

Small-addition checks

Agree the smallest ingredient trial and its acceptance method independently of the overall batch check. Record tare, addition sequence and shutoff conditions.

Transfer accounting

Review vessel and line contents at the end of transfer. Assign retained material, drainage and cleaning quantities to an agreed batch-handover procedure.

Receiving handover

Identify the receiving connection, ready/stop conditions and responsibility for the final quantity record before transfer is commissioned.

Delivered Project

Связанные проекты

The resin batching project illustrates vessels, pipework and access integration. It provides a physical application reference; the published record does not establish a standard capacity, transfer rate or recipe for another installation.

Посмотреть проект
Вопросы выбора и интеграции

Вопросы и ответы по применению

Уточните границы процесса, требования к материалу и приёмные интерфейсы.

How is batching different from transfer? +
Batching controls the quantity of each addition. Transfer moves the prepared material to the next process. Pumps, measurement and controls are selected for these separate duties.
Can the system handle a high-viscosity resin? +
Provide viscosity over the operating temperature range, solids content and material handling instructions. These inputs determine the pump, vessel agitation, valves and any conditioning requirement.
Does a vessel scale guarantee every ingredient dose? +
No. Minimum addition, tare, vessel loading, material flow and shutoff behavior affect the result. Define ingredient dosing acceptance separately from scale readability and total batch mass.
What should be agreed before installation? +
Confirm equipment boundaries, foundation and platform loads, piping routes, access, utilities, receiving connections and the commissioning acceptance plan.
Какую информацию мне следует отправить для подготовки коммерческого предложения по проекту? +
Resin identity and handling data, viscosity over the working temperature range, minimum ingredient addition, total batch mass, receiving elevation, pipe route, delivery schedule and allowable retained material. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.
How should material remaining in a transfer line be handled at batch handover? +
Identify what remains in the vessel and pipework, whether it is transferred, retained or removed, and which batch record receives that quantity. Review drainage and cleaning access for the actual route. Agree the receiving quantity check separately from vessel-scale readability and pump flow.

Discuss Your Resin Batching Project

Share the following for this application: Resin identity and handling data, viscosity over the working temperature range, minimum ingredient addition, total batch mass, receiving elevation, pipe route, delivery schedule and allowable retained material. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Связаться с нами

О том, как мы обрабатываем информацию из вашего запроса, читайте в Политика конфиденциальности.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube