
Решение для заполнения шин переработанной резиной и PU
Haifeng integrates recycled rubber granule and PU tire filling with metered feeding, mixing, pressure control and curing for off-road tire casings.
Recycled Rubber & PU Tire Filling Solution
Blend selected recycled rubber granules with a polyurethane filling system and pump the composite into an existing rubber tire casing. Coordinate liquid metering, independent granule feeding, blending and the discharge path as one filling process. Granule fraction, size distribution, cleanliness and moisture are specification inputs rather than fixed universal values.
Dedicated Cavity-Filling Route
Use the existing casing as the filling envelope. Do not apply high-pressure closed-mold tire-casting settings to this route.
Define the Assembly and Formulation
State tire and rim identity, load and speed conditions, formulation, ratio basis, material quantity and cure criteria in the technical specification.
Haifeng coordinates material delivery, the filling connection, controls and curing-workflow integration for the specified order. Delivery includes on-site commissioning, operator training, a 1-year machine warranty and long-term spare parts support. Treat liquid PU and recycled-granule supply as separate streams before blending and casing filling. Define the granule acceptance, storage, start/stop procedure and cleaning path so the composite remains compatible with the selected delivery system.
From Material Preparation to the Cured Tire Assembly
Four coordinated stages for the selected tire, formulation and equipment configuration.
Material and Tire Preparation
Select a compatible granule grade and PU system, and assess the existing tire casing, rim and filling connection. Establish the recipe and the records needed for the order.
Coordinated Feeding
Meter the two liquid components to the formulation requirement and control the granule feed independently. Specify a mixer and discharge path suitable for the selected particle grade.
Composite Tire Filling
Blend the liquid components and granules before introducing the mixture into the existing tire cavity. Manage filling and air release with tire-specific pressure control.
Equipment Reference and Application Inputs
Existing Haifeng equipment data are stated separately from tire-specific process settings.
| Параметр | Reference Value | Этап |
|---|---|---|
| Маршрут | Recycled rubber granules + two-component PU | Existing pneumatic tire casing |
| Reference Haifeng Model | HF-LPM-1A1B-OTR-K | Dedicated filling-equipment reference |
| Производительность потока | 60–300 кг/ч | Equipment configuration; operating point is application dependent |
| Объём бака для сырья | 700 л | Equipment configuration; operating point is application dependent |
| Вместимость бункера для частиц | 500 л | Equipment configuration; operating point is application dependent |
| Общая установленная мощность | 5,5 кВт | Equipment configuration; operating point is application dependent |
| Частота вращения смесительной головки | 30–105 об/мин | Equipment configuration; operating point is application dependent |
| Точность дозирования | ≤0,3 % | Equipment configuration; operating point is application dependent |
| Рабочее давление | 0–15 бар | Equipment configuration; operating point is application dependent |
| Защита от превышения давления | Автоматическое отключение и звуковая и световая сигнализация при превышении давления | Equipment configuration; operating point is application dependent |
| Tire Filling Pressure | Set from tire/rim and application requirements | Distinct from mixing or equipment working pressure |
| Load Capacity | Specify per wheel and duty conditions | Do not derive a 12-ton rating from the filling machine |
| Cure Schedule | Selected PU material system data and release check | Time and temperature are formulation specific |
| Гарантия | 1 год | Haifeng machine warranty |
| Granule Grade and Fraction | Defined for the selected formulation and particle-feed configuration | No universal recycled fraction or particle-size claim |
Reference Haifeng Tire-Filling Equipment
The granule-filling reference includes a distinct particle path; liquid metering, hopper/feeding, blending and casing connection must be reviewed together.
Configuration Priorities
Define each control function around the tire and formulation.
Metering and Recipe Control
Specify the liquid components and ratio basis independently of any granule feed.
Separate Pressure Settings
Define the tire-cavity setpoint and the equipment operating limits separately.
Coordinated Filling Integration
Match the mixing, material path and filling connection to the liquid or particulate mixture.
Batch and Release Records
Record material batches, filled quantity, pressure and cure-release checks for each order.
Вопросы и ответы по планированию производства
Подбор, объём поставки и валидация для этого производственного направления.
How does rubber-granule filling differ from pure PU filling?
What granule data is needed?
How are blockage and settling reviewed?
What determines filled-tire acceptance?
Какие исходные данные нужны для этой конфигурации?
How should granule quality and interruption handling be specified?
Plan Your Engineering Tire-Filling System
Share the following for this application: Casing/rim data, granule source and grading, moisture/cleanliness, PU system, granule fraction and stop/start needs. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.