HFFR Flame Retardant TPU Solution Banner background

Решение на основе безгалогенного огнестойкого TPU (HFFR)

Configure TPU/mineral compounding and pelletizing for a defined halogen-free flame-retardant cable-grade formulation.

Конфигурация процесса

High-Filler Compounding Without Sacrificing Cable Flexibility

This route compounds a selected base TPU with mineral/additive feeds. Feeding, dispersion, venting and pelletizing must suit the powder and thermal window. Flame rating, elongation and cable surface quality are material or finished-cable results; they are not automatically provided by the line.

Определенный объем поставки

Define gravimetric feeds, side feeding, screw arrangement, venting and selected pelletizing. Base-TPU synthesis and final cable qualification are separate scope items.

Исходные данные для выбора процесса

Base TPU, filler/additive data, loading, powder behavior, output, pelletizing choice and material/cable tests.

Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Define gravimetric feeds, side feeding, screw arrangement, venting and selected pelletizing. Base-TPU synthesis and final cable qualification are separate scope items.

Производственный маршрут

HFFR Flame Retardant TPU Workflow

Characterize and feed → Melt and compound → Vent and pelletize → Test compound and cable samples. Define preparation, filling, cure and output timing separately for the selected configuration.

01

Characterize and feed

Confirm TPU, mineral/additives, dosing and powder handling.

02

Melt and compound

Validate temperature, side feeding and dispersion for the formulation.

03

Vent and pelletize

Establish devolatilization and the selected pelletizing/drying sequence.

Конфигурация процесса

Технические характеристики эталонного решения

Существующая конфигурация и справочные данные испытаний. Настройки оборудования, результаты по материалам и результаты по готовой сборке приведены отдельно; применяйте каждое значение только к его задокументированной конфигурации и условиям.

ПараметрЗначение / единица измеренияПрименимая конфигурация / условия
Непрерывная производительность300.0 to 800.0 kg/hourHigh-torque co-rotating twin-screw compounding line
Mineral Filler Loading Capacity40% to 60% by weightDual-stage forced side stuffers with powder de-aeration
Finished Material Flame RatingUL94 V-0 (At 0.8 mm thickness)Vertical burn test compliant with zero burning drips
Retained Tensile ElongationGreater than or equal to 400%ASTM D412 testing on compounded cable jacket matrix
Limiting Oxygen Index (LOI)Greater than or equal to 35%ASTM D2863 oxygen index measurement on compound
Pelletizing Mechanism TypeDie-face water-ring cuttingTungsten-titanium carbide die plate with water ring
Existing application note: This route compounds TPU pellets and additives. Flammability and oxygen-index results apply to the tested compound and specimen thickness. Cable qualification is assessed separately from equipment capability. Original process references, with their existing values: Base TPU ratio 40–60%; Feed tolerance ±0.3%; confirm for selected material and tooling; Zone temp 165–175°C; Screw speed 300–450 RPM; confirm for selected material and tooling; Powder loading 40–60 wt%; Side feeder output up to 500 kg/h; confirm for selected material and tooling; Melt temp < 190°C; Vacuum level ≤ 0.05 kPa; confirm for selected material and tooling; Line output 300–800 kg/h; Residual moisture < 0.03%; confirm for selected material and tooling. Supplementary references: melt zone 175°C, flexibility at -30°C and surface roughness Ra ≤ 1.2 µm. Validate the chosen compound and downstream specimen; these outcomes do not follow solely from screw or vacuum configuration. The original screw/feeder discussion names Zones 1–5 for melt preparation and Zones 6 and 8 for side feeding. Treat these as a specific barrel-layout example, subject to formulation and equipment drawings. Confirm the configuration, material, test method and cycle endpoints before using reference values as acceptance commitments.

Основное оборудование для этого решения

Справочные данные по оборудованию выбираются по документированному для них процессу. Основное дозирование, вспомогательная подача и альтернативные схемы не являются единым стандартным комплексом.

Управление процессом и прикладные проверки

Оцените эти функции с учетом выбранного материала, оснастки и производственного задания. Для результатов готовых деталей требуется отдельное приемочное подтверждение.

Powder-specific supply

Evaluate bridging, aeration and addition rather than promising unrestricted filler handling.

Thermal-window control

Develop screw/temperature conditions around the selected polymer and filler.

Separate fire and cable tests

Keep specimen thickness, burn method and cable qualification explicit.

Связанные проекты

Это справочные данные по родственным применениям. Сравнивайте фактические материалы, процесс и поставленные модули; приведенные показатели проекта не являются приемочными результатами для другой линии.

Смотреть проект
Вопросы планирования

Вопросы и ответы по планированию производства

Подбор, объём поставки и валидация для этого производственного направления.

Does the compounding line guarantee V-0 or a robotic-cable grade? +
No. Test the selected compound at the stated thickness and evaluate the cable construction separately.
Can every powder use the maximum filler reference? +
No. Flow, bulk density, moisture, thermal behavior and dispersion affect feed and process limits.
Какая информация необходима для предварительной конфигурации? +
Base TPU, filler/additive data, loading, powder behavior, output, pelletizing choice and material/cable tests. Identify the equipment and interfaces to retain, plus the required test and acceptance documents.

Обсудите ваши производственные задачи

Share the following with your production brief: Base TPU, filler/additive data, loading, powder behavior, output, pelletizing choice and material/cable tests. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Связаться с нами

О том, как мы обрабатываем информацию из вашего запроса, читайте в Политика конфиденциальности.

Анализ конфигурации на основе данных о применении и материалах Согласованная документация по оборудованию, интерфейсам и приёмке Обучение и поддержка, определённые для поставляемого комплекта
Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube