
Headrest PIP Foaming Line Solution
Configure pour-in-place PU headrests around the cover, core, injection seal and rotary mold sequence.
Headrest PIP Foaming Line Solution
PIP headrest production combines the specified cover and internal support with controlled PU delivery and mold handling. Cover sealing, fill access, venting and the selected material affect appearance and consistency. Recirculation and pressure controls support operation but do not alone establish drip-free injection or a density result.
Определенный объем поставки
Define the head, metering unit, turntable, tooling and manual/automatic preparation and removal. Do not imply a customer case where none is currently documented.
Исходные данные для выбора процесса
Headrest/cover and core drawings, sealing/fill/vent arrangement, formulation, shot mass, mold count and work schedule.
Equipment scope, retained factory interfaces and acceptance are agreed for the selected material and part. Define the head, metering unit, turntable, tooling and manual/automatic preparation and removal. Do not imply a customer case where none is currently documented.
Headrest PIP Foaming Line Workflow
Prepare cover and support → Seal and set the fill path → Meter and cure → Remove and inspect. Define preparation, filling, cure and output timing separately for the selected configuration.
Prepare cover and support
Locate the cover, armature and any inserts in the tool.
Seal and set the fill path
Confirm injection access, venting and cover/tool support.
Meter and cure
Validate shot delivery and rotary residence for the material.
Технические параметры
Существующая конфигурация и справочные данные испытаний. Настройки оборудования, результаты по материалам и результаты по готовой сборке приведены отдельно; применяйте каждое значение только к его задокументированной конфигурации и условиям.
Состав линии
| Единица оборудования | Кол-во | Функция |
|---|---|---|
| HF-HPM High-Pressure Foaming Machine | 1 комплект | Two-component high-pressure impingement mixing & metered injection, dosing accuracy ≤±0.3% |
| Смесительная головка | 1 комплект | Высоконапорное смешивание, точный объём впрыска, самоочистка |
| Карусельная линия | 1 комплект | 8/10/12-station optional; cyclic mold operation: injection–foaming–mold opening–part removal |
| Система электрического управления | 1 комплект | Интеллектуальное управление на базе ПЛК с настройкой параметров, мониторингом состояния и сигнализацией неисправностей |
Headrest PIP High-Pressure Foaming Machine
| Параметр | Значение |
|---|---|
| Модель | HF-HPM-1A1B-HeadrestPIP |
| Скорость заливки | 50–1000 г/с |
| Mix ratio | Polyether : Isocyanate = 100 : 45~60 |
| Ёмкость резервуара | 100L / 150L per tank, optional |
| Точность дозирования | ≤±0.3% (Full Dynamic Range); specified HF-HPM-1A1B-HeadrestPIP configuration |
| Metering units | Polyether / Isocyanate, one each, pump + safety valve + VFD motor |
| Recirculation system | High/low-pressure cycle switching system |
| Pressure protection | Pressure limiting and control system |
| Конфигурация ёмкостей | 1A1B two-component independent temp control + circulation stirring |
| Контроль температуры | 20–45 °C |
| Давление смешивания | 10–18 МПа |
| Система очистки | Автоматическая продувка воздухом, без растворителей |
| Мощность | 5,5–7,5 кВт |
| Система управления | ПЛК + сенсорный экран + хранение нескольких рецептур |
| Система нанесения | PU high-resilience flexible foam system |
| Гарантия | 1 год |
| Сертификация | CE, ISO9001 |
Core Components
| Component | Функция |
|---|---|
| Polyether polyol metering unit | Metering pump + safety valve + VFD motor, closed-loop flow control |
| Isocyanate metering unit | Metering pump + safety valve + VFD motor, closed-loop flow control |
| Pressure limiting & control system | Keeps injection pressure stable |
| High/low-pressure cycle switching | Prevents pressure build-up and settling |
| Hydraulic unit | Stable power for mixing head and turntable motions |
| Смесительная головка | High-pressure impingement mixing, precise shot volume |
| Pipeline tanks | Two-component tanks with independent temp control + circulation stirring |
The listed dosing accuracy is a metering reference for the specified configuration. Define the measured quantity, material condition, flow and shot range, calibration and acceptance method. It is not a finished-part dimensional or performance tolerance.
Вспомогательное оборудование для вашей линии вспенивания
Справочные данные по оборудованию выбираются по документированному для них процессу. Основное дозирование, вспомогательная подача и альтернативные схемы не являются единым стандартным комплексом.
Управление процессом и прикладные проверки
Оцените эти функции с учетом выбранного материала, оснастки и производственного задания. Для результатов готовых деталей требуется отдельное приемочное подтверждение.
Headrest-specific preparation
Review cover sealing and internal-support placement before metering selection.
Defined injection checks
Inspect shot delivery, cutoff and pressure behavior under actual material conditions.
Balanced rotary layout
Select station population from preparation, cure and removal rather than station count alone.
Вопросы и ответы по планированию производства
Подбор, объём поставки и валидация для этого производственного направления.
How is the rotary station count selected?
Does pressure switching guarantee no dripping or uniform density?
Какая информация необходима для предварительной конфигурации?
Получить бесплатное предложение
Share the following with your production brief: Headrest/cover and core drawings, sealing/fill/vent arrangement, formulation, shot mass, mold count and work schedule. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.