Wind Blade Leading-Edge Coating Solution Banner background

Solución de recubrimiento para el borde de ataque de palas eólicas

Servo-metered spraying for the polyaspartic resin/aliphatic-isocyanate leading-edge coating for the selected application. Robotic tracking and film inspection are separately specified options.

Planificación de la línea de producción

Polyaspartic Leading-Edge Coating Configuration

Servo-metered spraying for the polyaspartic resin/aliphatic-isocyanate leading-edge coating for the selected application. Robotic tracking and film inspection are separately specified options.

Servo Metering

The specified feed-control system manages the selected coating ratio and calibrated delivery window.

Film-Build Control

Traverse, atomization and inspection are configured against a dry-film target; wet-film settings are established separately.

Distinguish factory leading-edge application from field repair, then define the traverse, wet film and dry-film inspection. Robotic tracking and film measurement are separately selected; laboratory rain erosion is not an energy-yield or field-life guarantee.

Flujo de fabricación

Turnkey Precision Leading-Edge Protection Workflow

Una secuencia configurada de preparación del sustrato, acondicionamiento del material, aplicación, curado e inspección para el sistema de revestimiento seleccionado.

01

Prepare la superficie

Confirm preparation and coating compatibility for the blade substrate.

REFERENCE SETTINGS AND ACCEPTANCE CONDITIONS FOLLOW THE SELECTED MATERIAL AND PROJECT.
02

Define the Application Path

Specify robotic tracking and its interface separately for the actual blade geometry.

REFERENCE SETTINGS AND ACCEPTANCE CONDITIONS FOLLOW THE SELECTED MATERIAL AND PROJECT.
03

Meter the Coating

Condition and meter the selected polyaspartic resin and aliphatic-isocyanate components.

REFERENCE SETTINGS AND ACCEPTANCE CONDITIONS FOLLOW THE SELECTED MATERIAL AND PROJECT.
Configuración y parámetros del proceso

Envolvente de ingeniería de la solución de referencia

Configuración suministrada y referencias del sistema de recubrimiento. Los valores dependen del material, el sustrato, el ensayo y las condiciones de operación indicados.

ElementoReferencia / dato de selecciónCondiciones
Referencia de caudal de dosificación0.5–4.5 kg/minSupplied equipment-configuration range; calibrate with the selected material.
Fluid-pressure reference10–14 MPaConfirm circuit and operating conditions in the equipment schedule.
Pressure-ripple reference<±0.1 MPaBrief process-control value requiring measurement records; no pulse-free assertion.
Dry-film target300 ±20 µmTarget for the selected application; wet-film settings and final inspection are separate.
Submitted rain-erosion reference120 m/s; 15 h; no reported pittingMaterial/specimen reference for the selected coating, cure and rain-erosion test conditions.
Submitted airfoil comparison<0.2%Airfoil comparison under the agreed geometry and measurement conditions; separate from turbine energy performance.
Equipment ratings, film properties and laboratory material results are specified separately. Acceptance criteria include the applicable specimen, test method and operating conditions.
Aspectos técnicos a considerar

Core Advantages of Haifeng Blade Solutions

Mecanismos de proceso e interfaces del proyecto configurados para el paquete de equipos seleccionado.

Servo Metering

The specified feed-control system manages the selected coating ratio and calibrated delivery window.

Film-Build Control

Traverse, atomization and inspection are configured against a dry-film target; wet-film settings are established separately.

Rain-Erosion Test Evidence

Laboratory erosion testing is specific to the coating, substrate, cure and test conditions under the agreed test method.

Airfoil Evaluation Evidence

Surface profile and wind-tunnel results are component-specific; a spray configuration alone does not establish turbine energy yield.

Aplicaciones y proyectos relacionados

Proyectos relacionados

The linked leading-edge project supports its material and application arrangement, not every blade geometry or field-repair procedure.

Revisar proyecto
Preguntas sobre planificación de la producción

Preguntas frecuentes

Find answers about Wind Blade Leading-Edge Polyurea Solution, including material selection, equipment configuration and the information needed to plan a production line.

How are dry and wet coating thickness controlled? +
The supplied dry-film target is 300 ±20 µm. Wet-film settings depend on the coating and application method and must be established separately; the two thickness measures are not assumed equal.
Do spray stability and wind-tunnel results establish turbine energy gains? +
No. Pressure ripple and surface profile are process measurements; wind-tunnel lift-to-drag results are specific to the tested aerofoil. Annual turbine energy production requires its own operating evidence.
How is laboratory rain-erosion performance evaluated? +
Confirm the coating, substrate, cure, speed, droplet distribution, rain rate and failure criterion in the original report. A 15-hour rotating-arm result is not automatically a field service-life guarantee.
Can a factory package be used for field blade repairs? +
Field repair requires a separately defined mobile package, access/loading arrangement, surface preparation and environmental window. A factory gantry configuration is not assumed suitable for suspended access without project engineering.
¿Qué datos se necesitan para esta configuración? +
Blade geometry/surface, repair or factory mode, material ratio/window, target dry film, access and rain-erosion test requirements. Identify retained equipment and the required acceptance documents.
What must accompany a rain-erosion comparison? +
Keep specimen construction, cure, droplet/impact conditions, speed, duration and damage endpoint with the report. Compare the intended leading-edge design separately from turbine energy or service-life claims.

Request a Wind Blade LEP Coating Proposal

Share the following for this application: Blade geometry/surface, repair or factory mode, material ratio/window, target dry film, access and rain-erosion test requirements. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.

Contáctenos

Para saber cómo tratamos la información de su consulta, lea nuestra Política de privacidad.

Haifeng Polyurethane Machinery on TikTok
Haifeng Polyurethane Machinery on Instagram
Haifeng Polyurethane Machinery on Facebook
Haifeng Polyurethane Machinery on X
Haifeng Polyurethane Machinery on LinkedIn
Contact Haifeng Polyurethane Machinery on WhatsApp
Haifeng Polyurethane Machinery on YouTube