
حل طلاء الحافة الأمامية لشفرات توربينات الرياح
Servo-metered spraying for the polyaspartic resin/aliphatic-isocyanate leading-edge coating for the selected application. Robotic tracking and film inspection are separately specified options.
Polyaspartic Leading-Edge Coating Configuration
Servo-metered spraying for the polyaspartic resin/aliphatic-isocyanate leading-edge coating for the selected application. Robotic tracking and film inspection are separately specified options.
Servo Metering
The specified feed-control system manages the selected coating ratio and calibrated delivery window.
Film-Build Control
Traverse, atomization and inspection are configured against a dry-film target; wet-film settings are established separately.
Distinguish factory leading-edge application from field repair, then define the traverse, wet film and dry-film inspection. Robotic tracking and film measurement are separately selected; laboratory rain erosion is not an energy-yield or field-life guarantee.
Turnkey Precision Leading-Edge Protection Workflow
تسلسل مُهيّأ لتجهيز الركيزة وتكييف المادة والتطبيق والمعالجة والفحص لنظام الطلاء المختار.
تحضير السطح
Confirm preparation and coating compatibility for the blade substrate.
Define the Application Path
Specify robotic tracking and its interface separately for the actual blade geometry.
Meter the Coating
Condition and meter the selected polyaspartic resin and aliphatic-isocyanate components.
النطاق الهندسي للحل المرجعي
التكوين المورَّد ومراجع نظام الطلاء. تعتمد القيم على المادة والسطح وظروف الاختبار والتشغيل المذكورة.
| البند | المرجع / مدخل الاختيار | الشروط |
|---|---|---|
| مرجع ناتج قياس الجرعات | 0.5–4.5 kg/min | Supplied equipment-configuration range; calibrate with the selected material. |
| Fluid-pressure reference | 10–14 MPa | Confirm circuit and operating conditions in the equipment schedule. |
| Pressure-ripple reference | <±0.1 MPa | Brief process-control value requiring measurement records; no pulse-free assertion. |
| Dry-film target | 300 ±20 µm | Target for the selected application; wet-film settings and final inspection are separate. |
| Submitted rain-erosion reference | 120 m/s; 15 h; no reported pitting | Material/specimen reference for the selected coating, cure and rain-erosion test conditions. |
| Submitted airfoil comparison | <0.2% | Airfoil comparison under the agreed geometry and measurement conditions; separate from turbine energy performance. |
المعدات الأساسية لهذا الحل
The servo spray reference concerns metering and application; robotic motion and coating inspection have their own scope and integration needs.
Core Advantages of Haifeng Blade Solutions
آليات عملية وواجهات مشروع مُهيَّأة لحزمة المعدات المختارة.
Servo Metering
The specified feed-control system manages the selected coating ratio and calibrated delivery window.
Film-Build Control
Traverse, atomization and inspection are configured against a dry-film target; wet-film settings are established separately.
Rain-Erosion Test Evidence
Laboratory erosion testing is specific to the coating, substrate, cure and test conditions under the agreed test method.
Airfoil Evaluation Evidence
Surface profile and wind-tunnel results are component-specific; a spray configuration alone does not establish turbine energy yield.
مشاريع ذات صلة
The linked leading-edge project supports its material and application arrangement, not every blade geometry or field-repair procedure.
الأسئلة الشائعة
Find answers about Wind Blade Leading-Edge Polyurea Solution, including material selection, equipment configuration and the information needed to plan a production line.
How are dry and wet coating thickness controlled?
Do spray stability and wind-tunnel results establish turbine energy gains?
How is laboratory rain-erosion performance evaluated?
Can a factory package be used for field blade repairs?
ما المدخلات اللازمة لهذا التكوين؟
What must accompany a rain-erosion comparison?
Request a Wind Blade LEP Coating Proposal
Share the following for this application: Blade geometry/surface, repair or factory mode, material ratio/window, target dry film, access and rain-erosion test requirements. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.
