
حل تحبيب السلائف ETPU
البثق التفاعلي وإنتاج حبيبات دقيقة متجانسة لتطوير حبيبات TPU الممددة والأحذية اللاحقة.
TPU Precursor Pellets for Downstream Expanded-Bead Development
البثق التفاعلي وإنتاج حبيبات دقيقة متجانسة لتطوير حبيبات TPU الممددة والأحذية اللاحقة.
نطاق المعدات والعملية
Liquid feed preparation, reactive extrusion, melt pumping and micro-pelletizer with drying interfaces. Supercritical-gas expansion and bead molding equipment are separately defined.
التحقق وتخطيط الإنتاج
This line produces unexpanded TPU precursor pellets. Supercritical expansion and steam-chest molding are separate downstream stages. Rebound, expansion ratio and foam density apply to the selected expanded samples and suitable test methods.
Keep unexpanded precursor pellets, bead expansion and final molded footwear as separate production stages. Pellet size/distribution is a line output; expansion ratio, bead density, rebound and energy return belong to later material/process tests.
Turnkey ETPU Precursor Granulation Process
يُحدَّد تسلسل العملية وتكوين الخط وفقًا للمادة والتجهيزات القالبية ومتطلبات الإنتاج المختارة.
Four-Stream Closed-Loop Mass-Flow Feeding
Supplied process reference: Low-crystallinity PCL polyols, PTMEG, molten pure MDI, and extenders are metered at 85°C into the extruder throat under nitrogen.
Controlled-Crystallinity Twin-Screw Polymerization
Supplied process reference: Reactants advance through an L/D = 54 barrel, where low-shear blocks guide molecular weight growth to tailor hard-segment domains.
Gear Pump Pressure Stabilization & Fine Filtration
Supplied process reference: An oil-jacketed melt pump stabilizes delivery pressure at 15.0 MPa, passing melt through a 250-mesh hydraulic screen changer.
النطاق الهندسي للحل المرجعي
مراجع التكوين والتحقق المُقدَّمة؛ نتائج المواد/المكونات منفصلة عن تصنيفات المعدات.
| المعامل | القيمة / الوحدة | التكوين / الظروف المطبَّقة |
|---|---|---|
| Continuous Production Output | 200.0 to 600.0 kg/hour | High-torque co-rotating twin-screw extruder with gear pump |
| Precursor Bead Diameter Profile | 1.2 mm ± 0.05 mm | Micro-orifice carbide die plate (0.8–1.2 mm holes) |
| Downstream Expansion Reference — Separate Equipment | 4.0 to 6.0 times (sc-CO₂) — material-development reference | Expansion equipment and its operating conditions are separately specified; validate the selected precursor samples |
| Expanded-Sample Ball Rebound | Tested after the agreed expansion and molding stages | Specify cellular specimen, conditioning and rebound method; this is not an energy-return result or pelletizer rating |
| Downstream Expanded-Bead Density | 0.15 to 0.22 g/cm³ — material-development reference | Measured on the selected expanded samples after the separately specified expansion stage |
| Precursor Residual Moisture | Less than 0.02% (200 ppm) | High-speed centrifugal spin dryer with fluidized bed |
المعدات الأساسية لهذا الحل
The micro-pellet line prepares precursor stock. Expansion and bead/footwear molding equipment are separately specified.
Core Advantages of Haifeng ETPU Systems
وظائف المعدات وواجهاتها المهيأة للمادة والتجهيزات القالبية المختارة.
Separate Rebound and Energy-Return Testing
The line produces unexpanded precursor pellets. Ball rebound and energy return are different measurements on specified expanded or molded samples, with separate test methods and acceptance criteria.
1.2 mm Mini-Pellet Uniformity
Supplied configuration function: Micro-orifice underwater cutting yields identical bead masses, preventing irregular expansion in autoclaves. Project-dependent performance requires validation.
Downstream Expansion Interfaces
Define expansion and bead-molding equipment separately from reactive extrusion and pelletizing. Expansion ratio, foam density and finished-part properties are validated on the selected material and downstream process.
High-Pressure Non-Freezing Die
Supplied configuration function: Advanced ceramic internal thermal barriers prevent micro-orifices from freezing in water, ensuring steady runs. Project-dependent performance requires validation.
مشاريع ذات صلة
The related bead project may include downstream stages; confirm which were actually delivered before treating the entire project as the precursor-line scope.
الأسئلة الشائعة
How is precursor pellet size selected?
How does the machine prevent die-hole freeze-offs with small 0.8 mm holes?
What is the ideal gas medium for expanding these precursor beads?
Can these precursor beads be colored during the reactive extrusion process?
Does precursor pelletizing guarantee rebound or energy return?
ما المدخلات اللازمة لهذا التكوين؟
What should connect the precursor trial to the downstream expansion test?
ناقش أهدافك الإنتاجية
Share the following for this application: TPU grade/feed data, precursor size/distribution, pelletizing output, expansion route, coloring and downstream bead/part requirements. Our team will reply within one business day. Once requirements are clear, we provide a preliminary proposal within two business days.
